Teesside University (TU) • HNC Electrical and Electronic Engineering
Latest uploads for HNC Electrical and Electronic Engineering at Teesside University (TU). Looking for HNC Electrical and Electronic Engineering notes at Teesside University (TU)? We have lots of notes, study guides and revision notes available for HNC Electrical and Electronic Engineering at Teesside University (TU).
-
3
- 0
- 0
Modules HNC Electrical and Electronic Engineering at Teesside University (TU)
Notes available for the following courses of HNC Electrical and Electronic Engineering at Teesside University (TU)
Latest notes & summaries Teesside University (TU) • HNC Electrical and Electronic Engineering
Investigate the signal processing within the CPU of the PLC and the various signals. Investigate the communications involved with modern systems regarding the PLC-PLC and PLC-LAN systems using HMI interfaces or SCADA with varying manufacturers. Input/output I/O. Binary, hexadecimal and octal to denary conversions. Data Integrity: Longitudinal Redundancy Check (LRC), Cyclical Redundancy Checking (CRC). RS232 and RS422 signal communications. Networking topologies: star and bus.
Grade (P/M/D): MERIT Produce a Ladder Logic program to run on a Programmable Logic Controller (PLC). The program should control the safe operation of traffic lights at a cross roads. The design should allow for a pedestrian crossing to be added. This must also operate in a safe manor for the pedestrians and vehicle drivers. The system will be implemented using a Mitsubishi FX PLC. (This is the available hardware.) The development will take place on a Windows PC running Mitsubishi GX Developer a...
Grade (P/M/D): DISTINCTION Task 1 ===== This document details the suitability of a number of Programmable Logic Controllers (PLCs) to meet the requirements of a process to be controlled. The requirements also specify the use of three classes of PLC: 1. compact 2. modular 3. rack mounted Task 2 ====== Identify input devices and output devices from the following list: • Switch • Optical sensor • Control valve • DP transmitter • Start/stop button station • Limit switch • High level ...