PACKAGE DEAL FOR Millwright Power Transmission Correct Questions & Answers(Latest Update 2023)COMPLETE LATEST COMPILATION 2023/2024PACKAGE DEAL FOR Millwright Power Transmission Correct Questions & Answers(Latest Update 2023)COMPLETE LATEST COMPILATION 2023/2024PACKAGE DEAL FOR Millwright Power Tra...
[Show more]
1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" - ANSWERSa. 62.65" L=2C+1.57(D1+d2)+[(D1-d2)²/4C] L=2(17.5)+1.57(11.25+6.125)...
Preview 3 out of 22 pages
Add to cart1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" - ANSWERSa. 62.65" L=2C+1.57(D1+d2)+[(D1-d2)²/4C] L=2(17.5)+1.57(11.25+6.125)...
Advantage of using a chain coupling is that they A. Are easy to disconnect B. Are non-lubricating C. High vibration dampening capabilities D. All the above - ANSWERSA. Are easy to connect A coupling that could be used for high torque or power application is the A. Sleeve coupling B. Roll...
Preview 2 out of 7 pages
Add to cartAdvantage of using a chain coupling is that they A. Are easy to disconnect B. Are non-lubricating C. High vibration dampening capabilities D. All the above - ANSWERSA. Are easy to connect A coupling that could be used for high torque or power application is the A. Sleeve coupling B. Roll...
1. Input impeller 2. Follower turbine 3. Stator (reactor) - ANSWERSWhat are the three main components of a torque converter? A drive that is used to control infinite positioning of material handling equipment - ANSWERSWhat is a variable-speed drive? 1. Housing 2. Input shaft and energy sour...
Preview 2 out of 10 pages
Add to cart1. Input impeller 2. Follower turbine 3. Stator (reactor) - ANSWERSWhat are the three main components of a torque converter? A drive that is used to control infinite positioning of material handling equipment - ANSWERSWhat is a variable-speed drive? 1. Housing 2. Input shaft and energy sour...
From one shaft to the other - ANSWERSThe most common form of power transmission Parallel shaft - ANSWERSBelt and chain drives are used to transmit power from one shaft to this Datum width - ANSWERSA metric V-belt is specified in the ISO standard by this designation 3/8 inch - ANSWERSA V-bel...
Preview 1 out of 1 pages
Add to cartFrom one shaft to the other - ANSWERSThe most common form of power transmission Parallel shaft - ANSWERSBelt and chain drives are used to transmit power from one shaft to this Datum width - ANSWERSA metric V-belt is specified in the ISO standard by this designation 3/8 inch - ANSWERSA V-bel...
What are the purposes of couplings? 13:1 - ANSWERSCouplings are used to join two shafts together & transmit power. What are the 4 main types of couplings? 13:1 - ANSWERS-rigid couplings -flexible couplings -universal joints (u-joints) -centrifugal What are the operative limits of rigid coup...
Preview 1 out of 3 pages
Add to cartWhat are the purposes of couplings? 13:1 - ANSWERSCouplings are used to join two shafts together & transmit power. What are the 4 main types of couplings? 13:1 - ANSWERS-rigid couplings -flexible couplings -universal joints (u-joints) -centrifugal What are the operative limits of rigid coup...
The amount of power that a belt drive can transmit is directly related to the _________ of the belt on the pulley A. Tension B. Friction C. Grip D. Angle - ANSWERSC. Grip The grip of the belt on the pulley depends on A. Area, materials, tension B. Area, tension, angle C. Angle, materials...
Preview 2 out of 9 pages
Add to cartThe amount of power that a belt drive can transmit is directly related to the _________ of the belt on the pulley A. Tension B. Friction C. Grip D. Angle - ANSWERSC. Grip The grip of the belt on the pulley depends on A. Area, materials, tension B. Area, tension, angle C. Angle, materials...
The amount of power that a belt drive can transmit is directly related to the _________ of the belt on the pulley A. Tension B. Friction C. Grip D. Angle - ANSWERSC. Grip The grip of the belt on the pulley depends on A. Area, materials, tension B. Area, tension, angle C. Angle, materials...
Preview 2 out of 6 pages
Add to cartThe amount of power that a belt drive can transmit is directly related to the _________ of the belt on the pulley A. Tension B. Friction C. Grip D. Angle - ANSWERSC. Grip The grip of the belt on the pulley depends on A. Area, materials, tension B. Area, tension, angle C. Angle, materials...
What is pressure defined as? - ANSWERSForce per unit area F=(P)(A) What is the pressure of the Earth's atmosphere at sea level? - ANSWERS14.7 psi How is power defined? A. The rate or velocity at which power is done B. The rate or velocity at which work is created C. The speed of the veloci...
Preview 2 out of 8 pages
Add to cartWhat is pressure defined as? - ANSWERSForce per unit area F=(P)(A) What is the pressure of the Earth's atmosphere at sea level? - ANSWERS14.7 psi How is power defined? A. The rate or velocity at which power is done B. The rate or velocity at which work is created C. The speed of the veloci...
This link consists of two bushing's which are pressed fit into two roller link plates and two rollers which revolve freely on the bushings A. Roller B. Pin C. Connecting D. Offset - ANSWERSA. Roller Links with oversized oil impregnated bushings that take the place of the rollers are called...
Preview 2 out of 10 pages
Add to cartThis link consists of two bushing's which are pressed fit into two roller link plates and two rollers which revolve freely on the bushings A. Roller B. Pin C. Connecting D. Offset - ANSWERSA. Roller Links with oversized oil impregnated bushings that take the place of the rollers are called...
__________ couplings require positive positioning of the shaft A. Universal B. Flexible C. Centrifugal D. Rigid - ANSWERSD. Rigid Sleeve, flanged clamped __________ Which permit slight misalignment and endplay of the shaft A. Universal B. Flexible C. Centrifugal D. Rigid - ANSWE...
Preview 2 out of 12 pages
Add to cart__________ couplings require positive positioning of the shaft A. Universal B. Flexible C. Centrifugal D. Rigid - ANSWERSD. Rigid Sleeve, flanged clamped __________ Which permit slight misalignment and endplay of the shaft A. Universal B. Flexible C. Centrifugal D. Rigid - ANSWE...
What are the two main types of gravity roller conveyor? - ANSWERSStandard gravity roller conveyors and skate wheel conveyors What are three frame styles available for skate wheel conveyors? - ANSWERSPlain skids, skids with built-in guards, and wheel skid conveyors What are two frame styles ava...
Preview 2 out of 10 pages
Add to cartWhat are the two main types of gravity roller conveyor? - ANSWERSStandard gravity roller conveyors and skate wheel conveyors What are three frame styles available for skate wheel conveyors? - ANSWERSPlain skids, skids with built-in guards, and wheel skid conveyors What are two frame styles ava...
1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid - ANSWERSb. Extreme pressure lubricant 2. The most common measurement of kinematic viscosity is what? a. Viscosity b. Centistok...
Preview 1 out of 4 pages
Add to cart1. What type of oil or grease would be used in a heavy load situation? a. Synthetic oil b. Extreme pressure lubricant c. Mineral oil d. Any hydraulic fluid - ANSWERSb. Extreme pressure lubricant 2. The most common measurement of kinematic viscosity is what? a. Viscosity b. Centistok...
You should operate a heavy-duty roller chain at about the same load capacity as that of a __________________. - ANSWERSstandard roller chain How does the life of a sintered bushing chain compare to the life of a standard roller chain? - ANSWERSlasts five times longer What type of chain offers ...
Preview 1 out of 3 pages
Add to cartYou should operate a heavy-duty roller chain at about the same load capacity as that of a __________________. - ANSWERSstandard roller chain How does the life of a sintered bushing chain compare to the life of a standard roller chain? - ANSWERSlasts five times longer What type of chain offers ...
Preventive maintenance - ANSWERSis the periodic inspection and maintenance of plant assets and equipment to uncover conditions that may to equipment failure or shortened life This measures the amount of contaminants per litre of fluid. a. ferromagnetic analysis b. total base number c. infrared...
Preview 2 out of 8 pages
Add to cartPreventive maintenance - ANSWERSis the periodic inspection and maintenance of plant assets and equipment to uncover conditions that may to equipment failure or shortened life This measures the amount of contaminants per litre of fluid. a. ferromagnetic analysis b. total base number c. infrared...
1. What is used to control a constant pressure in a pneumatic system? a. A flow control valve b. A regulator c. An MPRV d. Compressor rating - ANSWERSb. A regulator 2. What type of screw compressor removes some heat during the compression stage? a. A dry screw b. A stainless screw ...
Preview 1 out of 4 pages
Add to cart1. What is used to control a constant pressure in a pneumatic system? a. A flow control valve b. A regulator c. An MPRV d. Compressor rating - ANSWERSb. A regulator 2. What type of screw compressor removes some heat during the compression stage? a. A dry screw b. A stainless screw ...
The resistance to movement between two surfaces that touch each other. - ANSWERSWhat is Friction? Using lubricants - ANSWERSWhat is the best wasy to mitigate friction? 1. Increased power consumption 2. It causes wear 3. It generates waste heat that can reduce life of components - ANSWERSWhat...
Preview 3 out of 16 pages
Add to cartThe resistance to movement between two surfaces that touch each other. - ANSWERSWhat is Friction? Using lubricants - ANSWERSWhat is the best wasy to mitigate friction? 1. Increased power consumption 2. It causes wear 3. It generates waste heat that can reduce life of components - ANSWERSWhat...
Why are machines accurately aligned with each other? 23:1 - ANSWERSMachines are accurately aligned to work together smoothly. Thus increasing working life. How is the Primary unit positioned? 23:1 - ANSWERSThe primary unit is positioned according to reference lines (centre-lines, benchmarks etc) ...
Preview 2 out of 8 pages
Add to cartWhy are machines accurately aligned with each other? 23:1 - ANSWERSMachines are accurately aligned to work together smoothly. Thus increasing working life. How is the Primary unit positioned? 23:1 - ANSWERSThe primary unit is positioned according to reference lines (centre-lines, benchmarks etc) ...
unusual - ANSWERSIf the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife - ANSWERSFor removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on th...
Preview 2 out of 9 pages
Add to cartunusual - ANSWERSIf the seal was not properly aligned or there is excessive wear in some bearing or shaft,_______ wear tracks will be the indicator sharpened brass putty knife - ANSWERSFor removing hard to remove gasket materials found on sealing surfaces, ______ is recommended Conducted on th...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller shantelleG. Stuvia facilitates payment to the seller.
No, you only buy these notes for £28.82. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
93547 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy revision notes and other study material for 14 years now