Aircraft marshaling Study guides, Revision notes & Summaries

KC-135 closed book annual questions with correct answers Pilots should not exchange seats during flight if only two pilots are aboard the airplane (T/F) True Verbal coordination between the pilot flying the aircraft and the applicable crew member will be required when Any of the above Normal hydraulic pressure range is ____ to ___ psi 2400 - 3050 psi Maximum EGT during engine start is ____ degrees C 725 EGT between _____ is limited to 5 min duration. EGT between...

CENTER INSTRUMENT PANEL Where is the BRAKE SUPPLY switch located? < 20 DEGREES NLG POSITION If caster is to be used, when must you place switch to CASTER? 3 APPLICATIONS How many full brake applications with fully charged (3,000 PSI) brake accumulator? CENTER During the last 50ft of towing and aft bogies are castered, return MLG to neutral position by placing caster switch to: CENTER INSTRUMENT PANEL Where is the NLG position indicator located? ALT, NOR...

NRTC NAVEDTRA 14233A ASN 4 LATEST UPDATE GRADED A What U.S. Air Force command is usually requested to provide strategic airlift requirements for contingency movements of NCF mobile units? AMC Under normal operations, the NCF uses what four types of aircraft for embarkation? C-5, C-17, C-130, KC-10 What is the purpose of the Computer-Aided Load Manifesting (CALM) system? Design aircraft load plans In an amphibious embarkation, what authority determines the shipping requirements and embarkatio...

Ramp class quiz 2 |Questions with Correct Answers 2024| Graded A+ what is the term referred to as the use of hand signals by ground personnel to direct the aircraft to the correct parking position aircraft marshaling how far away from the base of the t-line should you stand when marshaling an aircraft? 10 ft what is the jet blast zone on American Airlines when the engines are at idle? 100 ft what is the ingestion zone? 15ft in front of the engine what must occur before you can enter the...

Ryanair Conversion 3 Questions and Answers 100% Pass What lever is used to slide a pilot seat fully AFT? H Lever What would you do first if a CC becomes incapacitated? Make the area safe for the incapacitated CC. If the N1 becomes incapacitated before departure, what is the procedure? - N2 becomes N1, if qualified. - N3 becomes N2. -N4 remains in position. if the N2 becomes incapacitated during the flight what is the procedure? - N1 remains in position. - N3 becomes N2. - N4 remains in positi...

Ramp Quiz 2 |All Questions Solved 100% Correct / Score A+ 2024 what is the term referred to as the use of hand signals by ground personnel to direct the aircraft to the correct parking position Ans: - aircraft marshaling how far away from the base of the t-line should you stand when marshaling an aircraft? Ans: - 10 ft what is the jet blast zone on American Airlines when the engines are at idle? Ans: - 100 ft what is the ingestion zone? Ans: - 15ft in front of the engine what must o...

6 Areas of Naval Doctrine - WIOLPN - Warfare, Intelligence, Operations, Logistics, Planning, Naval Command & Control Origin of USMC - Nov, 10 1775 @ Tun Tavern in Philadelphia, PA. 2 BNs raised under a resolution from Continental Congress. When did USMC go under dept. of the Navy? - 1834 Official Motto of USMC - Semper Fidelis, Always Faithful Describe origin and and meaning of "Leatherneck" - A leather neckpiece worn by Marines from 1775-1875 aboard ships in order t...

Ramp class quiz 2 |Questions with Correct Answers 2024| Graded A+ what is the term referred to as the use of hand signals by ground personnel to direct the aircraft to the correct parking position aircraft marshaling how far away from the base of the t-line should you stand when marshaling an aircraft? 10 ft what is the jet blast zone on American Airlines when the engines are at idle? 100 ft what is the ingestion zone? 15ft in front of the engine what must occur before you can enter the...

In this assignment i have explained the purpose of aircraft marshaling the hazards specific to marshaling, different type of foreign object debris and different types of personal protective equipment used in the marshaling process.

Pre-operational inspections on motorized equipment must be completed: A. Once a week B. At the beginning of every shift C. Once per shift D. Once per month B. At the beginning of every shift When parking nonmotorized equipment, you should: A. Chock the tires B. Stow the tongue in the up and locked position C. Play the tongue on the ground D. Hook it up to a bag tug B. Stow the tongue in the up and locked position The yolk style tow bar is used on which aircraft? A. B737 ...