Boom diagram Samenvattingen, Aantekeningen en Examens

NCCCO Core Exam Prep (2023/ 2024 Update) Questions and 100% Correct Verified Answers| Grade A Q: What three functions will not work after two-blocking a crane that has a prevention system? Answer: Boom down, extend the boom and hoist Q: Boom angle on a telescoping boom is measured from above or below horizontal to the ? Answer: Longitudinal axis of the boom base section Q: The line pull of the innermost layer on the hoist drum is than...

The safety of life at sea convention was developed by the: - Answer- International Maritime Organization SOLAS requires a lifesaving training manual be provided in each crew cabin or in the: - Answer- recreation and messrooms The most important reason for taking anti-seasickness pills as soon as possible after entering a liferaft is to - Answer- prevent loss of body moisture by vomiting One of the first actions to be taken by survivors when they have boarded an inflatable is to - Answer...

ASA 101-Practice test | QUESTIONS AND ANSWERS When sailing, always be aware of the wind's ______ and _______ speed, direction The desirable force generate______. lift The direction relative to the wind in which the sailboat cannot sail is called the_______. no-sail zone Sailboats can reach an upwind destination by sailing a _______ course. zig zag The point of sail at the edge of a no-sail zone is called_________. close-hauled A boat sailing across the wind is said to be __________...

Mobile Crane Test (New 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Graded A QUESTION On a mobile cranes range diagram, boom length and boom angle can be used to determine? a. load weight b. load radius c. counterweights d. gross capacity Answer: load radius QUESTION On a mobile crane, what is the weight of the stowed jib that is deducted in load chart calculations called? a. actual weight b. non-deducted weight c. effective weight d....

NCCCO Core Exam Prep (2024 / 2025 Update) Questions and 100% Correct Verified Answers | Grade A Q: What three functions will not work after two-blocking a crane that has a prevention system? Answer: Boom down, extend the boom and hoist Q: Boom angle on a telescoping boom is measured from above or below horizontal to the ? Answer: Longitudinal axis of the boom base section Q: The line pull of the innermost layer on the hoist drum is than the outermost layer. Answer: Greater Q: Side loading of a c...

NCCCO Core Test Prep (New 2023/ 2024 Update) Questions and Verified Answers| Graded A| 100% Correct QUESTION With the boom at its highest angle and its shortest radius, how many wraps of wire rope need to be on the drum at all times? Answer: 2 QUESTION When measuring load radius of the crane. You measure from the axis of rotation of the crane to the ? Answer: Center of gravity of the load QUESTION What must be deducted from the gross capacity of t...

NCCCO CORE FINAL EXAM QUESTIONS AND ANSWERS LATEST UPDATE 2024/2025 (100% CORRECT) Before leveling a mobile crane on outriggers, an operator should ensure: - ANSWER there is no weight of the crane bearing on any tires Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - ANSWER Keeping 90 degree angle between cylinder rod and pad What is the primary purpose fir a rooster sheave or auxiliary boom point sheave? - ANSWER Separate the boom h...

OECP Exam Questions With 100% Correct Answers 2024/2025 (GRADED) The shaded area on a load chart indicates _______? A structural chart 3. The minimum distance to a power line of unknown voltage is ? 50' 4. When hoisting personnel and have known voltage, can you use Table A and get closer than 20'? Never! 5. What is the minimum tale swing clearance requirement 2' 6. What kind of rigger is required for A/D? Qualified Rigger 7. Signal training is now required in the construction...

OECP Exam Questions With 100% Correct Answers 2024/2025 (VERIFIED) The shaded area on a load chart indicates _______? A structural chart 3. The minimum distance to a power line of unknown voltage is ? 50' 4. When hoisting personnel and have known voltage, can you use Table A and get closer than 20'? Never! 5. What is the minimum tale swing clearance requirement 2' 6. What kind of rigger is required for A/D? Qualified Rigger 7. Signal training is now required in the constructi...

CCO PRACTICE Exam | Questions & 100% Correct Answers (Verified) | Latest Update | Grade A+ When working on rubber, cranes are rated at what percentage of tipping: a) 70% b) 75% c) 80% d) 85% Correct Answer: 75% When a crane is working "on outriggers" the only time they should be less than fully extended is when: a) working alongside the highway and cannot block a lane b) you are handling light loads c) the main boom is being lifted d) there is a load chart for this operation ...