Steel lintel Samenvattingen, Aantekeningen en Examens

The inspector is not required to determine ____ ___ of any system or component. - Answer- -Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot - Answer- 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed - Answer- Also called weep screed. Used at the base/bottom of stucco walls to release moisture. Pressure Vacuum Breaker (PVB) - Answer- Used for Backflow Prevention. Lawn Irrigation systems: installed...

Q 18803) A steel beam supporting loads from the floor slab as well as from wall is termed as (1)Stringer beam (2)Lintel beam (3)Spandrel beam (4)Header beam correct answers More Q 18801) Rolled steel angle sections are classified 1.Equal angles 2.Un Equal angles 3.Bulb angles 4.All the above correct answers More Q 18794) The density of steel used in the structural members should be (1)1 gm/mm3 (2) 6.4 gm/cm3 (3)7.9 gm/cm3 (4)13.6 gm/cm3 correct an...

Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed Document Content and Description Below Professional Home Inspector Exam NHIE / TREC Questions and Answers Already Passed The inspector is not required to determine ____ ___ of any system or component. -Years of age -Life expecta ncy -Make model Horizontal waste pipe should slope ____ inch per foot 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed Also called weep screed. U...

Buckling in a horizontal vinyl siding is generally caused by A. reflected light B. improper fastening C. condensation in the walls D. improper house wrap B. improper fastening At what level would water pressure within a single-family dwelling begin to be considered excessive and require correction? A. 60 psi B. 80 psi C. 100 psi D. 120 psi B. 80 psi A newer home with electric heat is being inspected. It has a below grade finished basement containing a bedroom. The inspect...

The inspector is not required to determine ____ ___ of any system or component. - ANSWER -Years of age -Life expectancy -Make model Drip screed - ANSWER Also called weep Horizontal waste pipe should slope ____ inch per foot - ANSWER 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe screed. Used at the base/bottom of stucco walls to release moisture. Pressure Vacuum Breaker (PVB) - ANSWER Used for Backflow Prevention. Lawn Irrigation systems: installed v...

The inspector is not required to determine ____ ___ of any system or component. - Answer- -Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot - Answer- 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed - Answer- Also called weep screed. Used at the base/bottom of stucco walls to release moisture. Pressure Vacuum Breaker (PVB) - Answer- Used for Backflow Prevention. Lawn Irrigation systems: install...

Professional Home Inspector state Exam Guide final 2024 tested and verified The inspector is not required to determine ____ ___ of any system or component. - CORRECT ANSWER--Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot - CORRECT ANSWER-1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed - CORRECT ANSWER-Also called weep screed. Used at the base/bottom of stucco walls to release moisture. Pressur...

Professional Home Inspector Exam NHIE / TREC Questions and Answers Rated A+ The inspector is not required to determine ____ ___ of any system or component. -Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed Also called weep screed. Used at the base/bottom of stucco walls to release moisture. Pressure Vacuum Breaker (PVB) Used for Backflow...

The maximum compressive stress a material can withstand without failure. - Compression Strength A solid, hard material produced by combining Portland cement, aggregates, sand, water and sometimes additional mixtures. - Concrete The difference between the indoor temperature in winter and the outdoor design temperature in winter. The design temperature differential or design range is used in calculating the space heating requirements of a dwelling unit under the engineering-based methodology...

The inspector is not required to determine ____ ___ of any system or component. - ANSWER -Years of age -Life expectancy -Make model Horizontal waste pipe should slope ____ inch per foot - ANSWER 1/4" per foot if < 3 inch pipe. 1/8" per foot if > or = to 3 inch pipe Drip screed - ANSWER Also called weep screed. Used at the base/bottom of stucco walls to release moisture. Pressure Vacuum Breaker (PVB) - ANSWER Used for Backflow Prevention. Lawn Irrigation systems: installed v...