IBC Fireproofing Exam 2023/2024 Graded A+ SI Certs Fireproofing Practice Test 1-3 2023 Fire Protection Systems Written Test 2023 Sprayed applied fire Proofing Exam AWCI Manual 12A (SFRM Practice Questions/Material) Fireproofing Inspector Exam Preparation AWCI Manual 12B Review with Complete Solutio...
[Meer zien]
Special inspections - ANSWER-_____ for sprayed fire resistant materials applied to floor, roof and wall assemblies and structural members shall be in accordance with Sections 1705.13.1 to 1705.13.6. Approved construction documents - ANSWER-Special inspections shall be based on the fire resistance...
Voorbeeld 1 van de 3 pagina's
In winkelwagenSpecial inspections - ANSWER-_____ for sprayed fire resistant materials applied to floor, roof and wall assemblies and structural members shall be in accordance with Sections 1705.13.1 to 1705.13.6. Approved construction documents - ANSWER-Special inspections shall be based on the fire resistance...
1x verkocht
What is the minimum allowable TFIFRM thickness determination? - ANSWER-80% of specified thickness How many TFIFRM thickness determinations are required for a W-shape column? - ANSWER-24 How many TFIFRM thickness readings are required for a pipe column? - ANSWER-24 Suppose you are performing...
Voorbeeld 2 van de 5 pagina's
In winkelwagenWhat is the minimum allowable TFIFRM thickness determination? - ANSWER-80% of specified thickness How many TFIFRM thickness determinations are required for a W-shape column? - ANSWER-24 How many TFIFRM thickness readings are required for a pipe column? - ANSWER-24 Suppose you are performing...
Refer to Figure 21. - Using the chart, determine the temperature range for a fire-extinguishing agent storage container with a pressure of 330 P.S.I.G. - Consider 330 P.S.I.G for both minimum and maximum pressure. - ANSWER-45 to 73°F. A carbon dioxide (CO2) hand-held fire extinguisher may be u...
Voorbeeld 1 van de 3 pagina's
In winkelwagenRefer to Figure 21. - Using the chart, determine the temperature range for a fire-extinguishing agent storage container with a pressure of 330 P.S.I.G. - Consider 330 P.S.I.G for both minimum and maximum pressure. - ANSWER-45 to 73°F. A carbon dioxide (CO2) hand-held fire extinguisher may be u...
Physical and visual test - ANSWER-Conditon of substrate Thinkness of application Density in pounds per cubic food (kg/m3) Bound strength adhesion/conhesion Condition of finshed application structure member surface condition - ANSWER-Surfaces shall be prepared accordance with approved fire res...
Voorbeeld 1 van de 2 pagina's
In winkelwagenPhysical and visual test - ANSWER-Conditon of substrate Thinkness of application Density in pounds per cubic food (kg/m3) Bound strength adhesion/conhesion Condition of finshed application structure member surface condition - ANSWER-Surfaces shall be prepared accordance with approved fire res...
Which standards/codes are included in AWCI Manual 12A? - ANSWER-ASTM E119, UL 263, ULC S101-M What are Sprayed Fire Resistive Materials according to UL? - ANSWER-UL no longer recognizes the terms cementitious or sprayed fiber to differentiate between sprayed fireproofing products. They are combin...
Voorbeeld 2 van de 6 pagina's
In winkelwagenWhich standards/codes are included in AWCI Manual 12A? - ANSWER-ASTM E119, UL 263, ULC S101-M What are Sprayed Fire Resistive Materials according to UL? - ANSWER-UL no longer recognizes the terms cementitious or sprayed fiber to differentiate between sprayed fireproofing products. They are combin...
What is the purpose of Manual 12B? - ANSWER-To provide field inspection procedures for the testing of thin-film intumescent fire resistive materials (TFIFRM) applied to structural members at thicknesses not greater than 660 mils (16.76 mm) Who should inspect the substrate conditions prior to appl...
Voorbeeld 1 van de 4 pagina's
In winkelwagenWhat is the purpose of Manual 12B? - ANSWER-To provide field inspection procedures for the testing of thin-film intumescent fire resistive materials (TFIFRM) applied to structural members at thicknesses not greater than 660 mils (16.76 mm) Who should inspect the substrate conditions prior to appl...
A permit must be pulled for a retaining wall more than ______ high - ANSWER-4' Who may revoke a permit if it was issued in error or in violation of an ordinance ? - ANSWER-The Building Official ___________ __________ can issue a notice of violation - ANSWER-Building Department Type _______...
Voorbeeld 2 van de 5 pagina's
In winkelwagenA permit must be pulled for a retaining wall more than ______ high - ANSWER-4' Who may revoke a permit if it was issued in error or in violation of an ordinance ? - ANSWER-The Building Official ___________ __________ can issue a notice of violation - ANSWER-Building Department Type _______...
gesponsord bericht van onze partner
Stuvia-klanten hebben meer dan 700.000 samenvattingen beoordeeld. Zo weet je zeker dat je de beste documenten koopt!
Je betaalt supersnel en eenmalig met iDeal, creditcard of Stuvia-tegoed voor de samenvatting. Zonder lidmaatschap.
Samenvattingen worden geschreven voor en door anderen. Daarom zijn de samenvattingen altijd betrouwbaar en actueel. Zo kom je snel tot de kern!
Je krijgt een PDF, die direct beschikbaar is na je aankoop. Het gekochte document is altijd, overal en oneindig toegankelijk via je profiel.
Onze tevredenheidsgarantie zorgt ervoor dat je altijd een studiedocument vindt dat goed bij je past. Je vult een formulier in en onze klantenservice regelt de rest.
Stuvia is een marktplaats, je koop dit document dus niet van ons, maar van verkoper CLOUND. Stuvia faciliteert de betaling aan de verkoper.
Nee, je koopt alleen deze samenvatting voor €21,71. Je zit daarna nergens aan vast.
4,6 sterren op Google & Trustpilot (+1000 reviews)
Afgelopen 30 dagen zijn er 94517 samenvattingen verkocht
Opgericht in 2010, al 14 jaar dé plek om samenvattingen te kopen