Minimum angle for rigging Study guides, Class notes & Summaries

Rigging 101 Final Exam 2023/2024 Questions with Complete Solutions Graded A+ Oxygen bottles that are properly secured in a rack or stand designed for lifting/handling would be considered a critical rigging option. - Correct Answer false There are three slings hanging from a hook. Each sling has the capacity of 2,000 pounds. What is the heaviest load that could be lifted using these slings if they were attached to a single point? - Correct Answer 2,000 lbs The minimum depth of thread engag...

Which of the following OSHA regulations govern suspended personnel platforms? correct answers OSHA 1926.1431 According to ASME B30.3 The prohibited zone for power lines that are 60 kV is correct answers 15 ft According to ASME B30.3, load hoist rotation resistant wire rope has a design factor of correct answers 5 to 1 According to ASME B30.3 when Lifting a suspended personnel platform design factor for the rigging hardware is correct answers 5 to 1 According to ASME B30.3 Load hoist ...

NEIEP 200 Final Exam Version 2 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: a mechanic attaches a chainfall to a hoisting beam with a beam clamp. what happens to the capacity of the hoisting beam? Answer: it is reduced to 50% of original capacity Q: you are rigging elevator equipment with a sling angle of 60 degrees. you are using a shouldered eye bolt with a tapped 1/2" diameter hole. once the shoulder is seated, what is the minimum threa...

1. A load chart range diagram can best be used to help identify:: net capacity 2. for mobile crane working at maximum radius, exceeding what percentage of the cranes capacity requires the radius to be verified?: 80% 3. the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is?: 3/4 in 4. when tying knots in synthetic rope lashing, the rated load is increased by 50% ?: false 5. the size of shackle that can be used in the eye of a wire rope sling must be the wire rope...

OSHA 10 Hour Test Questions 2023 (use CTRL + F ) to find your specific question and answer... Concerning the identification and control of worksite hazards, which one of these statements is FALSE? During the course of construction, how frequently should combustible scrap and debris be removed? In the event of exposure to hazardous conditions that cannot be eliminated, employers should require employees: An emergency action plan should contain all these elements EXCEPT: Safety prog...

OECP Exam Questions With 100% Correct Answers 2024/2025 (GRADED) The shaded area on a load chart indicates _______? A structural chart 3. The minimum distance to a power line of unknown voltage is ? 50' 4. When hoisting personnel and have known voltage, can you use Table A and get closer than 20'? Never! 5. What is the minimum tale swing clearance requirement 2' 6. What kind of rigger is required for A/D? Qualified Rigger 7. Signal training is now required in the construction...

Rigging Practices Course Questions and Answers (100% Solved) Latest. A load chart range diagram can best be used to help identify: net capacity for mobile crane working at maximum radius, exceeding what percentage of the cranes capacity requires the radius to be verified? 80% the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is? 3/4 in when tying knots in synthetic rope lashing, the rated load is increased by 50% ? false the size of shackle that can be used in t...

Rigging Practices Course Questions and Answers (100% Solved) Latest. A load chart range diagram can best be used to help identify: net capacity for mobile crane working at maximum radius, exceeding what percentage of the cranes capacity requires the radius to be verified? 80% the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is? 3/4 in when tying knots in synthetic rope lashing, the rated load is increased by 50% ? false the size of shackle that can be used in t...

1 MISSOURI BOATING LICENSE EXAM | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ Bow Correct Answer: Front of the vessel. Stern Correct Answer: Rear of the vessel. Starboard Correct Answer: Right side of the vessel. Port Correct Answer: Left side of the vessel. Hull Correct Answer: Body of the vessel. Gunwale Correct Answer: Upper edge of vessel's side. 2 Cleat Correct Answer: Metal fitting on which a rope can be fastened. Propeller Correct Answer: Rotates and...

OECP Exam Questions With 100% Correct Answers 2024/2025 (VERIFIED) The shaded area on a load chart indicates _______? A structural chart 3. The minimum distance to a power line of unknown voltage is ? 50' 4. When hoisting personnel and have known voltage, can you use Table A and get closer than 20'? Never! 5. What is the minimum tale swing clearance requirement 2' 6. What kind of rigger is required for A/D? Qualified Rigger 7. Signal training is now required in the constructi...