Ift 266 Study guides, Class notes & Summaries

IFT 266 Introduction to Network Information Communication Technology (ICT) Lab 1 TCP/IP & OSI Models, Internet and “Groups” Part A: OSI & TCP/IP Models OSI model comparison with TCP/IP model In column 2, indicate the proper name for each of the seven layers of the OSI model corresponding to layer number. List the TCP/IP layer number and its name in the next two columns (you can refer to the original or new model) List the PDU for each layer for both models.

Final Exam Logical Topology Network Requirements Examine the network requirements (current and future) and answer the questions below. 1. How many subnets are possible? How many subnets are required?

IFT 266 Introduction to Network Information Communication Technology Lab 16 Port Security Configuration After you complete each step, put a ‘√’ or ‘x’ in the completed box 1. Setup the following topology in packet tracer. - It is recommended that you use a 2960 switch for this lab. - You can change the MAC address of the server and PCs by going to the particular Fast Ethernet interface on each device (config tab) and overwriting what is currently listed. - To check your PC sett...

IFT 266 Introduction to Network Information Communication Technology Lab 17 DHCP Snooping

IFT 266 Introduction to Network Information Communication Technology (ICT) Lab 6 Switch Configuration (Speed & Duplex) IFT 266 Introduction to Network Information Communication Technology (ICT) Lab 6 Switch Configuration (Speed & Duplex) After you complete each step, put an ‘x’ in the completed box 1. In Packet Tracer setup the following topology. You can use two generic switches, but you will need to add in some Gigabit ports to the switch. Use a crossover cable as the transmission ...

IFT 266 Introduction to Network Information Communication Technology Lab 11 Configuring Network Time Protocol (NTP) on multiple devices

IFT 266 Introduction to Network Information Communication Technology Lab 12 VLAN – First Look! Co-Authored by Krys√ha Kaye Jameson After you complete each step, put a ‘√’ or ‘x’ in the completed box Objective Understand the basic workings of VLAN through the building of 3 isolated networks with 2 computers each and using only 1 switch 1. Setup the following topology in packet tracer

IFT 266 Introduction to Network Information Communication Technology (ICT) Lab 22 Local Link Address Configuration Objective: Configure a simple network with IPv6 and get the hosts communicating with each other and configure the router interfaces for IPv6. 1. Setup the following topology. For this lab use the 1941 Router which by default has Gigabit interfaces.

IFT 266 Introduction to Network Information Communication Technology Lab 14 Routing with a Multilayer Switch Co-authored by Marc Herrero After you complete each step, put a ‘√’ or ‘x’ in the completed box 1. Set up the following topology in packet tracer.

IFT 266 Introduction to Network Information Communication Technology (ICT) Lab 7 Verify Switch Configuration Answer each question by ticking the completed box with an ‘x’ or answer the open question 1. You can use any switch you want to complete the lab. For this lab we will be using a 2960 switch Task 1: Erase and Reload the Switch Clear the configuration on the switch Using a switch with an existing configuration may produce unpredictable results. Even though we have selected a new...