Asnt Study guides, Class notes & Summaries

ASNT VT Level II EXAM 2023/24 UPDATE 1. Per ASNT Section XI, NDE personnel shall be recertified: A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining 2. Per SNT-TC-1A, when an employee leaves his employer: A. his certification automatically transfers to his new employer B. his certification is automatically terminated C. he must take an examination to be certified by the ...

ASNT VT Theory Questions (Level II) Answered Correctly To Pass!! Localized reduction in an area of a bolt that is under overload conditions is referred to as: a. sizing b. necking down c. erosion d. elongation b The least common location for fastener failure is: a. in the head to shank fillet b. throughout the first thread inside the nut on threaded fasteners c. in the mid grip d. at the transition from the thread to the shank c Discontinuities that are produced during the hot...

ASNT VT Level II EXAM 2023/24 UPDATE 1. Per ASNT Section XI, NDE personnel shall be recertified: A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining 2. Per SNT-TC-1A, when an employee leaves his employer: A. his certification automatically transfers to his new employer B. his certification is automatically terminated C. he must take an examination to be certified by the ...

ASNT Study Guide - Industrial Radiography Radiation Safety Question and answers already passed 2024/2025The Symbol R means: a. rem b. rad c. roentgen d. radiation - correct answer c. roentgen The acronym rad means: a. radiation absorbed dose b. roentgen absorbed dose c. roentgen acquired dose d. radiation at death - correct answer a. radiation absorbed dose The roentgen (R) exposure is measured in: a. tissue b. water c. a lab d. air - correct answer d. air The symbol m...

ASNT Study Guide - Industrial Radiography Radiation Safety | 100% Correct Answers | Verified | Latest 2024 Version

ASNT VT Level II Exam (General Questions) With Complete Answers Graded A+ B. every 3 years by retraining and retesting 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transf...

ASNT VT Level II General Questions and Answers 2023 with complete solution

ASNT BASIC - Cert/snt/cp | 100% Correct Answers | Verified | Latest 2024 Version

What are the minimum and maximum solder temperatures? - Answer-One for the answers was from 250-450°F which is less than 850°F where brazing starts. What temperature does brazing start? - Answer-850°F 1 curie(Ci)=3.7x10^10 becquerel(Bq) - Answer-Conversion of Curie to Bq A UT inspection that uses two transducers on one side of the part- This technique is known? - Answer-Pitch/Catch A UT angle beam inspection is most apt to miss what? - Answer-Laminations parallel to the surface. Watch ...

ASNT Level 1 UT Questions and Answers Already Passed 1. The indication on the instrument display that represents the far boundary of material being tested is called: the back-surface reflection. 2. In immersion testing, the position of the transducer is often varied by a manipulator to transmit sound into the test part at various angles to the front surface. Such a procedure is referred to as: angulation. 3. The technical name for the cable that connects the ultrasonic instrument to the trans...