- Study guides, Class notes & Summaries

Carpentry: Module 2- Building Materials, Fasteners, and Adhesives Exam Q&A 100% Solved | Graded A+ Wood fibers are bound together by a substance called ___. - Lignin Which of the following is NOT an advantage of wood as a building material? - It is immune to damage from insects and weather The term "quarter-sawed" means ___. - The lumber is cut with the growth rings at an angle greater than 45 degrees Light framing Lumber is classified as ___. - Dimension lumber Which of thes...

-

4 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carpentry: Module 2 Test Exam Questions and Answers 100% Solved In a tree, growth takes place in the - Cambium Layer The term S-GRN means that the lumber - Has a moisture content over 19 percent A piece of lumber 3" in thickness and 8" wide would be described by which of these grading classifications? - Joists and planks If lumber is graded as double-end-trimmed, its ends are trimmed - Reasonably square on both ends Ground-contact-grade pressure-treated-lumber has a preservativ...

-

6 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carpentry: Module 3 Exam Questions and Answers 100% Solved | Graded A+ A tool that consists of a glass tube in a sleeve with hooks on each end is called a __________. - line level Which type of square can be used to check only right angles? - Try square A large hand plane used for rough work is the _______. - jack plane After using a grinding wheel to sharpen a plane iron, the edge must be dressed using a(n) ________. - oilstone The clamp whose jaws can be adjusted independently of ...

-

5 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carpentry - Module 4 Exam Questions and Answers 100% Solved | Graded A+ Benchmark - a point established by the surveyor on or close to the building side used as a reference for determining elevations during construction Contour Line - imaginary lines on a site plan that connect points of the same elevation. Easement - A legal right-of-way provision on another person's property that cannot be built on Elevation View - A drawing providing a view from the front or side of a struc...

-

5 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carp 2 - Mod 3 – Final Exam Questions and Answers 100% Solved | Graded A+ When carrying plywood or other sheet material on a windy day, you should - carry it so the edge of the sheet points to the wind The bottom of an extension ladder should be set back one foot for - each four feet of ladder length The equipment shown in upper right corner of textbook on page 5 of Module 3 - Exterior Finishing - is a - portable brake The most common type of exterior finish is - wood siding The ty...

-

3 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carpentry Module 8 - Horizontal Formwork Exam Q&A 100% Pass Ladders used to provide access to deck-forming levels must extend above the formwork at least _____. - 3 feet Stringers should be centered on U-heads and top plates to _____. - avoid eccentric loads Mudsills used to support shores must be sound and _____. - rigid Because of the massive weight of concrete being placed all at once for one-way solid slabs, the shoring system must be _____. - designed by a structural engineer...

-

5 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carpentry 2 Module 4 Exam Questions and Answers 100% Solved | Rated A+ . Before beginning an insulation project, you should always complete a - . job hazard analysis A type of personal protective equipment that is not usually needed when installing insulation is - earplugs When working with fiberglass insulation, gloves should be worn to - protect your skin from irritation If insulation or roofing materials contain chemicals that are hazardous, the manufacturer must provide a - saf...

-

4 pages

Written in 2024/2025

Grade A+

NinjaNerd

Carpentry: Module 6 Exam Questions and Answers 100% Solved | Graded A+ A short framing member that fills the space between the rough sill and the soleplate is a ________. - cripple stud The framing member that forms the side of a rough opening for a window or door is the ________. - trimmer stud A double top plate can be used to connect partitions that are perpendicular to a wall. - true The stud is the main horizontal framing member in a wall. - false The straightest, least defect...

-

9 pages

Written in 2024/2025

Grade A+

NinjaNerd

Nocti Review Questions with Complete Solutions

-

6 pages

Written in 2023/2024

Grade A+

cracker

Nocti Practice Test Revieew&Comma; Questions With Correct Details

-

2 pages

Written in 2023/2024

Grade A+

Divinehub

A dimensional lumber/nominal that is called a 2 X 10 actually measures 1 ½" x 9 ¼" To protect an outside drywall corner, it may be reinforced with a corner

-

1 pages

Written in 2023/2024

Grade A

EduSprint