Carpentry: Module 3 Exam Questions
and Answers 100% Solved | Graded A+
A tool that consists of a glass tube in a sleeve with hooks on each end is
called a __________. - ✔✔line level
Which type of square can be used to check only right angles? - ✔✔Try
square
A large hand plane used for rough work is the _______. - ✔✔jack plane
After using a grinding wheel to sharpen a plane iron, the edge must be
dressed using a(n) ________. - ✔✔oilstone
The clamp whose jaws can be adjusted independently of one another is the
________. - ✔✔hand-screw clamp
The handsaw that would be used to make a scroll cut on a trim piece is the
_______. - ✔✔coping saw
The saw blade should be held at about a 60-degree angle to the wood
when cutting with a ________. - ✔✔ripsaw
Before performing maintenance or changing accessories on any power
tool, be sure that it is _____________. - ✔✔disconnected
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, A small extension cord can be used for any type of power tool/ - ✔✔false
If a power tool is making unusual noises, sounds, or vibrations, _______. -
✔✔report the problem to your supervisor or instructor
Which of the following operations is not typically done with a portable table
saw? - ✔✔mortising
When ripping stock with a portable table saw, the blade should not project
above the material being cut by more than _________. - ✔✔1/8"
Before starting a drill press, always _________. - ✔✔remove the chuck key
A laminate trimmer is a specialized type of _________. - ✔✔router
A pneumatic nailer or stapler is powered by ______. - ✔✔compressed air
One of the hazards associated with a table saw is the possibility of
________ as the stock gets pinched as it travels through the saw blade. -
✔✔Kickback
The ______ should be sharpened on a bench grinder to ensure smooth
cutting. - ✔✔Plane iron
When cutting trim molding around a door frame, you would most likely be
performing _________. - ✔✔Miter cut
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
and Answers 100% Solved | Graded A+
A tool that consists of a glass tube in a sleeve with hooks on each end is
called a __________. - ✔✔line level
Which type of square can be used to check only right angles? - ✔✔Try
square
A large hand plane used for rough work is the _______. - ✔✔jack plane
After using a grinding wheel to sharpen a plane iron, the edge must be
dressed using a(n) ________. - ✔✔oilstone
The clamp whose jaws can be adjusted independently of one another is the
________. - ✔✔hand-screw clamp
The handsaw that would be used to make a scroll cut on a trim piece is the
_______. - ✔✔coping saw
The saw blade should be held at about a 60-degree angle to the wood
when cutting with a ________. - ✔✔ripsaw
Before performing maintenance or changing accessories on any power
tool, be sure that it is _____________. - ✔✔disconnected
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, A small extension cord can be used for any type of power tool/ - ✔✔false
If a power tool is making unusual noises, sounds, or vibrations, _______. -
✔✔report the problem to your supervisor or instructor
Which of the following operations is not typically done with a portable table
saw? - ✔✔mortising
When ripping stock with a portable table saw, the blade should not project
above the material being cut by more than _________. - ✔✔1/8"
Before starting a drill press, always _________. - ✔✔remove the chuck key
A laminate trimmer is a specialized type of _________. - ✔✔router
A pneumatic nailer or stapler is powered by ______. - ✔✔compressed air
One of the hazards associated with a table saw is the possibility of
________ as the stock gets pinched as it travels through the saw blade. -
✔✔Kickback
The ______ should be sharpened on a bench grinder to ensure smooth
cutting. - ✔✔Plane iron
When cutting trim molding around a door frame, you would most likely be
performing _________. - ✔✔Miter cut
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
