Carpentry: Module 6 Exam Questions and Answers 100% Solved | Graded A+

Carpentry: Module 6 Exam Questions

and Answers 100% Solved | Graded A+


A short framing member that fills the space between the rough sill

and the soleplate is a ________. - ✔✔cripple stud

The framing member that forms the side of a rough opening for a

window or door is the ________. - ✔✔trimmer stud

A double top plate can be used to connect partitions that are

perpendicular to a wall. - ✔✔true

The stud is the main horizontal framing member in a wall. -

✔✔false

The straightest, least defective studs are normally used for

_________. - ✔✔corners

The framing member that distributes the weight of the structure

around a door or window opening is the ___________. -

✔✔header

1
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.

, The width of a header is equal to the ________. - ✔✔width of the

openings plus the width of two trimmers studs

Fabricated headers normally use what material as spacers? -

✔✔1/2" plywood

A header used when a load is heavy, or the span is very wide, is

the _______. - ✔✔truss header

Steel studs are laid out to the ________. - ✔✔center line

The purpose of prepunched holes in steel studs is to ________. -

✔✔provide runs for piping and wiring

Steel studs are attached to the bottom channel using

__________. - ✔✔self-tapping sheet metal screws

If a 24" stud spacing is used for a two-story building, the first-floor

framing must be constructed with __________. - ✔✔2 x 6 lumber

The common stud used to each side of a window opening is also

called a __________. - ✔✔king stud




2
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.