NCCER Study guides, Class notes & Summaries

NCCER Module 9 (material handling) Questions and Verified Solutions Latest Update 2024 before attempting to lift any materials? - Answer -make sure the load does not have perusing nails wires or sharp edges before attempting to lower an overhead load? - Answer -size up the load what is the proper procedure to lift objects - Answer -bend knees and get a good grip, lift with legs keep back straight and head up when stacking bags of material that are the same width, step back and cross key ...

NCCER Module 3 (Hand Tools) | Questions and Verified Solutions Latest Update what is another name for a machinist hammer? - Answer -Ball-peen hammer a heavy duty tool used to drive posts or other large stakes is called a? - Answer -Sledgehammer what is the proper angle for the edge of a cold chisel? - Answer -60- degrees what types of screw comes to a relative sharp point at the base of its drive socket? - Answer -Reed and Prince how many sides does a Hexagonal shape have? - Answer -six s...

NCCER Construction Exam | Questions and verified Solutions Companies with strong safety cultures usually have lower - Answer -turnover Which of these is a true statement regarding safety? - Answer -Safety is a learned behavior or attitude Poor lighting, excessive noise, and inadequate guards for moving parts are examples of - Answer -unsafe conditions The activity that consists of breaking a job into its component tasks and then analyzing each step for potential hazards is called a - Answ...

Instrumentation Nccer | Questions and Correct Answers 2024 Update the concept of measuring, comparing, computing, and correcting is implemented by the -------- - Answer -Control System the operation or operations used in the treatment of materials compromise the ------ - Answer -process the process parameters are subject to if the energy balance is ------ - Answer -upset the process parameters that is selected for control is the ---- variable - Answer -control the control variable is ulti...

Instrumentation Nccer | 146 Questions and Verified Solutions Latest Update 1) The three fundamental units of all physical quantities are length, mass, and _________? a) Pressure b) Temperature c) Matter d) Time - Answer -d) Time 2) The meter-kilogram-second (MKS) system and the centimeter-gram-second (CGS) are part of the English system of measure? a) True b)False - Answer -b) False 3) How many inches are in one meter? a) 1.52 b) 12 c) 39.37 d) 40 - Answer -c) 39.37 4) When conve...

NCCER 26211-20 | Questions and Verified Solutions Latest Update A motor is connected L1 to T1, L2 to T2, and L3 to T3. To reverse the motor, the leads need to be connected _____. - Answer -L1 to T3, L2 to T2, and L3 to T1 A motor overload relay consists of a current-sensing unit and a mechanism activated by the sensing unit that _____. - Answer -opens the motor circuit A shading coil is used to _____. - Answer -prevent contact chatter A single-pushbutton contact can be used to control the...

NCCER 26411 | Questions and Verified Solutions 2024 Proof tests are made at _______. 20% of the original factory voltage 35% of the original factory voltage 40% of the original factory voltage 60% of the original factory voltage - Answer -60% of the original factory voltage The type of termination that only provides some form of electric stress control for the cable insulation shield terminus is a . Class 1 termination Class 2 termination Class 3 termination Class 4 termination - Ans...

NCCER Basic Safety Review | Questions and Correct Solutions Latest When you are doing excavation work, all soil must be treated as (________) soil. If you are not sure what type of soil you are working with - Answer -Type C Soil The (________________) on a job site must do daily inspection when excavation is being performed. - Answer -Competent Person You should always use the (______________________) to protect yourself and others from accidental electrical shock. - Answer -Three - Wire ...

00104 nccer test baby | Questions and Correct Answers Latest Update Trigger lock - Answer -When using power tools t=you never engage the ______________ disconnect the power source - Answer -before replacing things like bits, blades, discs or any tool you must drill bit - Answer -most hammer drills will not hammer unless pressure is applied to the ________ a power source is unavailable - Answer -a pnuematic drill is commonly used when _______________ the guard protects you from touching th...

NCCER MODULE 7 Basis communication skills | Questions and Verified Solutions 2024 in the study of communication, noise is best described as? - Answer -anything that interferes with a message being heard or understood folding your arms in front of you makes it seem as if you are? - Answer -distant/unwilling to talk if someone does not understand what a speaker is saying, he or she should? - Answer -ask questions when listening to instructions, the best way for listeners to make sure they ge...