What is the governor trip Study guides, Class notes & Summaries

When a truck has no air pressure in its tanks, which warning devices are activated when the ignition key is turned on? A buzzer, a dash gauge and a red light What legislation mandates every required standard of a highway truck air brake system? FMVSS 121 If a truck is FMVSS 121 compliant, which of the following air reservoirs must be incorporated into the air brake circuit? Supply, primary and secondary tanks In a truck air brake system which sub circuit is primarily resp...

Which lay of wire rope has the strand wires in line with the rope axis? - Regular Lay At what speed should the counterweight safeties be set to trip? - Up to 10% higher than the car governor Which type of safety uses an oil buffer between the car and safety planks? - Type C What is the purpose of the terminal motion switch? - slow down and stop the car automatically at or near the top or bottom landing If you have a 3500 lb. car rated at 4000 lbs. capacity, how much shoul...

Which lay of wire rope has the strand wires in line with the rope axis? (Ans- Regular Lay At what speed should the counterweight safeties be set to trip? (Ans- Up to 10% higher than the car governor Which type of safety uses an oil buffer between the car and safety planks? (Ans- Type C What is the purpose of the terminal motion switch? (Ans- slow down and stop the car automatically at or near the top or bottom landing If you have a 3500 lb. car rated at 4000 lbs. capacity, how ...

If a Balancing Authority does not comply with the Control Performance Standard, the Balancing Authority is not permitted to provide which of the following for any other Balancing Authority entities? Regulation of other services related to control performance 1. It is the obligation of each Balancing Authority to fulfill its commitment to the Interconnection and not ________ the other balancing Authorities in the Interconnection Burden A Balancing Authority is performing Overlap Regul...

DRIVER GEORGIA EXAM REVIEW QUESTIONS AND ANSWERS, 100% ACCURATE. VERIFIED. Modulating valve - -Control handle on the dashboard that may be used to apply spring brakes gradually Some vehicles have a separate air tank can be used to release the - -Spring brake You need at least what tread in the from tires and what thread I. Other tires - -4/32inch in front 2/32inch in back Steering wheel play of what degree can make it hard to steer - -10 degrees or two inches If more than one-forth or...

NEIEP 800 Final Exam Practice Questions With 100% Correct Answers 2023 | Latest Graded A+.Hydraulic overspeed valves will stop a downward traveling car if it exceeds speeds rated between _____ and _____ percent. - Correct Answer-110, 140 Car door switches are required to operate no more than _____ inches from full closed. - Correct Answer-2 With chairlifts, there needs to be at least _____ inches of free passage width remaining on the stairway, per code. If the lift has a seat, it can be me...

You are an external BA with a frequency bais of 20 MW/.1 Hz that sees a frequency of 60.02 due to a large loss of load in the contingent BA. If your generator governor control systems responded to the frequency deviation approximately how much of a generation change would you BA experience? -4MW Net actual interchange minus Net scheduled interchange is what? Inadvertent interchange Suppose your interconnection operators at 59.97 Hz from one minute after midnight to noon and operate a...

Neiep 200 Final Review (Questions And Answers) 2024/2025 Updated Which lay of wire rope has the strand wires in line with the rope axis? - CORRECT ANSWER-Regular Lay At what speed should the counterweight safeties be set to trip? - CORRECT ANSWERUp to 10% higher than the car governor Which type of safety uses an oil buffer between the car and safety planks? - CORRECT ANSWER-Type C What is the purpose of the terminal motion switch? - CORRECT ANSWER-slow down and stop the car automati...

A Balancing Authority notices that Operating Reserve has steadily declined throughout the hour. What is the most likely cause? a) Loss of a large generator in the area b) An inaccurate load forecast c) Loss of a major transmission line d) A malfunction of EMS b) An inaccurate load forecast Balancing Area A notices that the Interconnection frequency is 59.94 Hz and their ACE is 0. Which of the following could be the cause of this reading? a) A net under-generation in Balancing Area...

The Reliability Coordinator just informed you of a slow time error correction which will begin at the top of the next hour. Your EMS system will not let you change your scheduled frequency. Your Frequency Bias Setting is -100 MW/.1Hz. What action should you take? A) Increase Net Interchange Schedule by 20 MWs. B) Inform the Reliability Coordinator that you cannot participate in the time error correction. C) Decrease Net Interchange Schedule by 20 MWs. D) Increase Net Interchange Sche...