Corrosion test 2 Study guides, Class notes & Summaries

Fracture is a type of material failure. Of the following which is another type of material failure? - Permanent deformation. Which of the following statements best differentiates between a defect and a discontinuity? - Discontinuities can propagate and become defects. Nondestructive testing is often differentiated from other measurements or inspection techniques in that: - NDT involves indirect tests related to some other quality or characteristic of material. What are the functions of ...

A Hydrotest is conducted on an underground line as a substitute for the external inspection. The test pressure is 200 Psig. At the end of the test, the pressure must be at least - API 570 9.8.6 190 Psig. Determine the maximum allowed pressure for a Class 300 flange that has a design temperature of 950 °F. The flange material is ASTM A217 Gr. C12 - B16.5 Table 1.1-1 375 Psig. An 8 NPS pipe is being replaced with A106 gr. B material. The pipe retirement thickness (Tmin) is 0.218" and the ...

Where are the return openings located regarding air distribution systems? - correct answer Return air openings are located on inner walls. The minimum temperature of the water used in a hydrostatic test of a boiler cannot be less than what temperature? - correct answer 20 degrees Celsius Which of the following are causes of pressure explosions? 1. effects of corrosion 2. weak pilot flame 3. stressed material due to heating too quickly 4. insufficient purge 5. sca

API-510 Closed Book (Verified on test) Questions with Verified Solutions If a welder has qualified in the shielded metal arc welding, submerged arc welding, and gas tungsten arc welding processes but has welded in only one of them, qualification for the other 2 processes remains valid: A: for 6 months B: for 1 year C: for 2 years D: Indefinitely A: for 6 months One purpose of reviewing previous inspection reports is to ensure that: A: Estimated corrosion rates for new equipment are...

API 570 - Open Book - Practice Exam 2024 Already Passed A Hydrotest is conducted on an underground line as a substitute for the external inspection. The test pressure is 200 Psig. At the end of the test, the pressure must be at least - API 570 9.8.6 190 Psig. Determine the maximum allowed pressure for a Class 300 flange that has a design temperature of 950 °F. The flange material is ASTM A217 Gr. C12 - B16.5 Table 1.1-1 375 Psig. An 8 NPS pipe is being replaced with A106 gr. B mater...

NACE CIP 1 Practice Exam Questions and Answers 100% Pass Anode - Answer-the electrode at which oxidation occurs. electrons flow away from the the anode in the external circuit. corrosion usually occurs and metal ions enter the solution at the anode cathode - Answer-the electrode at which reduction occurs. electrons flow towards the cathode in the external ciruit cathodic protection - Answer-A technique to reduce the corrosion of a metal surface by making that surface the cathode of an el...

If a welder has qualified in the shielded metal arc welding, submerged arc welding, and gas tungsten arc welding processes but has welded in only one of them, qualification for the other 2 processes remains valid: A: for 6 months B: for 1 year C: for 2 years D: Indefinitely A: for 6 months One purpose of reviewing previous inspection reports is to ensure that: A: Estimated corrosion rates for new equipment are accurate B: Pressure relief valves have been installed prior to placing the v...

Az ROC Trade Exam B-3 License Correctly Solved Already Passed A+ Nails used for installing Hardboard panel siding vertically must accommodate the sheathing and penetrate the framing a minimum of how much? *ANS* 1-1/2 inches When framing openings in floors with a header and trimmer joists, what maximum header joist span is allowed with a single member header? *ANS* 4 feet Above the handrail and below the head, what is the minimum clear opening on a stairwell? *ANS* 36 inches When inst...

If a welder has qualified in the shielded metal arc welding, submerged arc welding, and gas tungsten arc welding processes but has welded in only one of them, qualification for the other 2 processes remains valid: A: for 6 months B: for 1 year C: for 2 years D: Indefinitely - A: for 6 months One purpose of reviewing previous inspection reports is to ensure that: A: Estimated corrosion rates for new equipment are accurate B: Pressure relief valves have been installed prior to placing the...