- Study guides, Class notes & Summaries

ASE A8 VERIFIED 100% SOLUTION spark plug wire resistance should be - ANSWER 5000 to 10000 ohms how do you test spark plug cables insulation - ANSWER spray it with salt water The specification, such as 10 BTDC, indicates that - ANSWER indicates that the spark occurs at 10 degrees before top dead center of the compression stroke With an increase in speed, ignition must begin - ANSWER earlier to end by 23 degrees ATDC Each cylinder must produce power once every - ANSWER 720 degrees what ...

-

13 pages

Written in 2023/2024

Grade A+

STUDENTSCORE

ASE A5 Brakes VERIFIED SOLUTIONS 2023//2024 A hydro-boost brake system has reduced braking performance. Technician A says to check the power steering system. Technician B says to check the vacuum check valve. Who is correct? - ANSWER TECH A is correct. The power steering pump produces pressure for the Hydro-Boost unit. A vehicle with power assisted brakes has a hard brake pedal. Which of the following is LEAST likely to cause this condition? A. Master cylinder. B. Vacuum check va...

-

8 pages

Written in 2023/2024

Grade A+

STUDENTSCORE

ASE A4 Steering and Suspension 100% SOLVED QUESTION AND CORRECT ANSWER Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. - ANSWER Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specifi...

-

30 pages

Written in 2023/2024

Grade A+

STUDENTSCORE

Good Luck

-

5 items

FRANKGEORGEM7

Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. - ANSWER Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specification then back off a certain number of degrees. A customer says that the stee...

-

30 pages

Written in 2023/2024

Grade A+

FRANKGEORGEM7

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - ANSWER C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel sh...

-

20 pages

Written in 2023/2024

Grade A+

FRANKGEORGEM7

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel shimmy at low spe...

-

41 pages

Written in 2023/2024

Grade A+

jessybrown

Exam (elaborations) ASE certification study guide with complete solutions 2023 2 Exam (elaborations) Michigan ASE Brake Certification Exam Graded A+ 3 Exam (elaborations) ASE Certification Chapter 35 Exam-Solved 4 Exam (elaborations) ASE MLR Certification Test Answered 100% Correct 5 Exam (elaborations) ASE Brake Certification Vocabulary Test

-

18 items

LUCKYSTAR2022

The front end of a vehicle vibrates up and down while traveling at most road speeds. Technician A says that too much radial runout of the front tires could be the cause. Technician B says that static out-of-balance of the front tires could be the cause. Who is right? (A) A only (B) B only (C) Both A and B (D) Neither A nor B - ANSWER-C. A vehicle wanders while being driven on level roads. Technician A says that too much negative camber could be the cause. Technician B says tha...

-

10 pages

Written in 2023/2024

Grade A+

LUCKYSTAR2022

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - ANSWER-C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel shimmy at...

-

19 pages

Written in 2023/2024

Grade A+

LUCKYSTAR2022

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - Answer- C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel shimmy a...

-

19 pages

Written in 2023/2024

Grade A+

Greaterheights

ASE B6 Test - Damage Analysis & Estimating Questions and Answers 2023 ASE A6 Test Prep (Electrical & Electronic Systems) Exam Solved 100% ASE A6 Electrical/Electronic Systems Exam with Complete Solutions ASE BRAKES Exam #1 Latest Updated ASE A8 Practice Test Questions and Answers 100% Correct ASE-A8 Engine performance with Complete Solutions

-

19 items

CLOUNDLite

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - ANSWER-C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel shimmy at...

-

19 pages

Written in 2023/2024

Grade A+

CLOUNDLite

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - Answer C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel shimmy ...

-

30 pages

Written in 2023/2024

Grade A+

BillRanker

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - Correct Answer C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel s...

-

23 pages

Written in 2023/2024

Grade A+

TeeGrades

ASE A1 Test Prep – Engine Repair | ASE A7 Test Prep – Heating and A/C | ASE A6 Test Prep – Electrical/Electronic Systems | ASE A4 Test Prep – Suspension and Steering | ASE A5 Test Prep - Brakes

-

5 items

NurseHenny

ASE A4 Test Prep – Suspension and Steering - Questions, Answers and Explanations All of the following could warrant replacement of a rack-and-pinion inter tie-rod end EXCEPT: A. Torn bellows boot B. Failed articulation test C. Socket looseness D. Incorrect rack bearing preload A torn bellows boot would let dirt and grit get to the tie-rod end socket and could cause it to fail. Looseness in the socket or failing an articulation effort test would require replacement. Incorrect rack bearing prel...

-

25 pages

Written in 2022/2023

Grade A

NurseHenny

ASE A4 practice test. VERIFIED 100% SOLUTIONS 2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B - ANSWER C. Both Techs are right. Too much runout or static out of balance in the front wheels will c...

-

20 pages

Written in 2022/2023

Grade A+

ACADEMICWISEGIANT

ASE A4 Steering and Suspension 100% SOLVED QUESTION AND CORRECT ANSWER Which of the following is the proper way to adjust the rack yoke bearing? A. Tighten to 75 ft lbs. B. Tighten to 5 inch lbs. C. Tighten and then back off the original equipment manufacturer's (OEM) specifications. D. Tighten to 0.002" end-play. - ANSWER Tighten and then back off the originial equipment manufacturer's (OEM) specifications. Many OEMs will recommend that the technician tighten to a specifi...

-

30 pages

Written in 2022/2023

Grade A+

ACADEMICWISEGIANT

2. A driver says that the front end of his car vibrates up and down while traveling at most road speeds. Tech A says that too much runout of the front wheels could be the cause. Tech B says that a static out of balance of the front wheels could be the cause. Who is right? A. Tech A only B. Tech B only C. Both A and B D. Neither A or B C. Both Techs are right. Too much runout or static out of balance in the front wheels will cause a vibration 3. A vehicle has front wheel shimmy at low...

-

24 pages

Written in 2022/2023

Grade A+

ExamVerse