Pipe Fitter Test | | 40 Questions with 100% Correct Answers | Updated & Verified

Pipe Fitter Test | | 40 Questions with 100% Correct Answers | Updated & Verified what is the most common degree of bevel on a pipe to be butt welded? - ANSWER -37 1/2 the three states of matter are: - ANSWER -solids, liquids,and gases what is the circumference of a circle that has a 20.50 inch diameter? - ANSWER 64.37 extension lines should: - ANSWER -always touch the object being drawn what is 23% of 1598? - ANSWER -367.54 what is the circumference of a circle with a diameter of 5" - ANSWER -15.70" what is the area of a triangle that is 30.5 feet long and 15 feet wide? (A=WxL) - ANSWER -457.5 square feet a globe valve is used to: - ANSWER -prevent flow in more than one direction what would be the take off for a 45 standard 3" pipe ells? - ANSWER -4" when using orifice flanges in a vapor service, the taps should be facing: - ANSWER -up what dies T.O.E stand for? - ANSWER -thread one end what does BLETSE stand for? - ANSWER -bevel large end/thread small end tools that require hearing protection when used are: - ANSWER -chipping gun, side grinder, air impact items to look for on a bench grinder before use are: - ANSWER -cracked wheel, tool rest within "1/8" of wheel, tongue guard attatched if you wanted to reduce in a line but keep the same center line, you would use an eccentric reducer - ANSWER -false the 2 most commonly used types of tubing connections are compression and flared. - ANSWER -true a pressure indicator is indicated by a Pi symbol on a flow chart - ANSWER -true a pressure indicator is indicated by a PI symbol on a flow chart - ANSWER -true spray painting or modifying hard hats may damage them - ANSWER -true pipe stamped with 316L and 304L denotes a grade or type of a carbon steel pipe and fittings. - ANSWER -false flange insulators Kits are installed for a cathodic protection - ANSWER -true the proper way to lift is bend at your knees and let you legs do the lifting - ANSWER -true exposure to high level noises can be controlled - ANSWER -true to reduce chances of heat stress you should drink plenty of beet and alcohol - ANSWER -false a temperature indicator is indicated by a TI symbol on a flow chart - ANSWER true What does TE in TE-601 stand for? - ANSWER -temperature element what does B.T.U stand for? - ANSWER -British Thermal Unit