NACE CIP 1 CBT EXAM WITH ACTUAL
QUESTIONS AND 100% VERIFIED ANSWERS |
LATEST 2025/ 2026 UPDATE | GRADED A+ |
100% SUCCESS
Types of soluble salt contamination include: - correct answer --
chlorides
- sulfates
- nitrates
If inspection is to be effective with regards to soluble salts, the
specification should very clearly state: - correct answer -- limits to be
accepted
- specific salts to be limited
- test method to be used
- frequency of testing
- locations in which tests should be administered
Test for soluble salts include: - correct answer -- Bresle Patch
- Sleeve Test
,- Soluble Salt Meters
- Conductivity Meters
Depth of surface profile can be evaluated by several methods: - correct
answer -- ISO comparator
- replica tape
- digital profile gauge
The ISO Comparator grades may be recorded: - correct answer -Finer-
than-fine grade, fine grade, medium grade, coarse grade, coarser than
coarse grade
The two types of replica tape that are commonly used are: - correct
answer -- coarse (0.8-2.5 mils)
- X coarse (1.5 to 4.5 mils)
List the standards for using replica tape: - correct answer -- ASTM D
4417 Method C
,- SP0287
When using Replica tape common errors include: - correct answer --
variation in point-to-point profile over the surface being tested
- the presence of particles of dirt on either the replica tape or gauge
- gauge accuracy
- the rubbing or burnishing technique
Goals of a pre-job conference - correct answer -- HSE discussion
- Adress/clarify emergency procedures
- Review SOW
- Review logistical support
- Discuss/clarify inspector responsibilities
- Clarify chain of command
People that may be required to attend a pre-job conference include: -
correct answer -- owner
- owner contract manager
- engineer
, - specifying engineer
- operations personnel
- specifier
- purchasing agents
- coatings mfg
- coatings inspector
- project safety personnel
- coatings applicator
Before the start of the Pre Job Conference the inspector should obtain a
copy of, read, and understand the: - correct answer -- specification
- any standard / procedure referenced in spec
- manufacturer's product data sheet
- safety requirements of the MSDS
One guide for enclosures for coatings projects is: - correct answer --
SSPC Technology Guide No. 12
- SSPC Technology Update No. 6 Guide for Containing Surface
Preparation Debris Generated During Paint Removal Operations
QUESTIONS AND 100% VERIFIED ANSWERS |
LATEST 2025/ 2026 UPDATE | GRADED A+ |
100% SUCCESS
Types of soluble salt contamination include: - correct answer --
chlorides
- sulfates
- nitrates
If inspection is to be effective with regards to soluble salts, the
specification should very clearly state: - correct answer -- limits to be
accepted
- specific salts to be limited
- test method to be used
- frequency of testing
- locations in which tests should be administered
Test for soluble salts include: - correct answer -- Bresle Patch
- Sleeve Test
,- Soluble Salt Meters
- Conductivity Meters
Depth of surface profile can be evaluated by several methods: - correct
answer -- ISO comparator
- replica tape
- digital profile gauge
The ISO Comparator grades may be recorded: - correct answer -Finer-
than-fine grade, fine grade, medium grade, coarse grade, coarser than
coarse grade
The two types of replica tape that are commonly used are: - correct
answer -- coarse (0.8-2.5 mils)
- X coarse (1.5 to 4.5 mils)
List the standards for using replica tape: - correct answer -- ASTM D
4417 Method C
,- SP0287
When using Replica tape common errors include: - correct answer --
variation in point-to-point profile over the surface being tested
- the presence of particles of dirt on either the replica tape or gauge
- gauge accuracy
- the rubbing or burnishing technique
Goals of a pre-job conference - correct answer -- HSE discussion
- Adress/clarify emergency procedures
- Review SOW
- Review logistical support
- Discuss/clarify inspector responsibilities
- Clarify chain of command
People that may be required to attend a pre-job conference include: -
correct answer -- owner
- owner contract manager
- engineer
, - specifying engineer
- operations personnel
- specifier
- purchasing agents
- coatings mfg
- coatings inspector
- project safety personnel
- coatings applicator
Before the start of the Pre Job Conference the inspector should obtain a
copy of, read, and understand the: - correct answer -- specification
- any standard / procedure referenced in spec
- manufacturer's product data sheet
- safety requirements of the MSDS
One guide for enclosures for coatings projects is: - correct answer --
SSPC Technology Guide No. 12
- SSPC Technology Update No. 6 Guide for Containing Surface
Preparation Debris Generated During Paint Removal Operations
