C-12 Test 1 Questions with Correct Answers Latest Update 2025/2026
The _______ position of the ELT readies it to transmit when an impact force occurs - Answers
Arm
If the aircraft attitude reaches extreme limits, all scales, pointers, and annunciations not related
to attitude are removed from the EADI. What bank angle will cause this to happen? - Answers 65
degrees
On the EADI, what will the FMS vertical deviation pointer do to alert the approach of a vertical
path waypoint? - Answers Flash
The radio altitude shows on the EADI below ______ AGL - Answers 2500
On the EHSI wind arrow each feather represents how many knots of wind? - Answers 10 knots
What provides control inputs to the EADI and EHSI? - Answers Display control panel (DCP)
On the turn slip indicator, where would the ball be during a skid? - Answers On the outside of the
turn
What provides pitch and roll references for the standby attitude indicator? - Answers Self-
contained gyro
Which of the following is not a capability of the FMS 3000?
A) Oceanic and remote operations between 80 degrees north and 80 degrees south
B) Minimum navigation performance standard's airspace
C) IFR instrument approach
D) Auto land - Answers Auto land
_______ processes transmissions from multiple GPS satellites simultaneously to calculate
navigation solutions? - Answers FMS 3000 flight management system
Which of the following is not a component of the FMS 3000?
A) Flight Management Computer
B) CDU-2000 Control display unit
C) Flight Data Recorder
, D) Database Unit - Answers Flight Data Recorder (FDR)
__________ accepts data from the GPS and computes a position estimate? - Answers Flight
Management Computer (FMC)
Each _________ provides an interface with the flight management computer (FMC).
A. integrated avionics processing system (IAPS)
B. CDU-2000 control display unit
C. air data computer (ADC)
D. database unit (DBU) - Answers B. CDU-2000 control display unit
ALL FMS data is visually displayed on ________. - Answers MFD, EADI, EHSI, and CDU
Which of the following is not a part of the initialization process for the FMS 3000?
A) Check NAV DATA
B) Checking currency of ACTIVE DATABASE
C) Checking time and setting correct UTC
D) Checking RAIM - Answers Checking RAIM
Which of the following is not a guideline for programming an airway leg on the FMS 3000?
A) If you try to enter or exit point not on airway, the FMS will generate message NOT ON
AIRWAY
B) Two airways that cross without a defined crossing intersection cannot be entered
C) Both entry and exit waypoint need not be on that airway
D) Both entry and exit waypoint must be on that airway - Answers Both entry and exit waypoint
need not be on that airway
The _______ position of the ELT readies it to transmit when an impact force occurs - Answers
Arm
If the aircraft attitude reaches extreme limits, all scales, pointers, and annunciations not related
to attitude are removed from the EADI. What bank angle will cause this to happen? - Answers 65
degrees
On the EADI, what will the FMS vertical deviation pointer do to alert the approach of a vertical
path waypoint? - Answers Flash
The radio altitude shows on the EADI below ______ AGL - Answers 2500
On the EHSI wind arrow each feather represents how many knots of wind? - Answers 10 knots
What provides control inputs to the EADI and EHSI? - Answers Display control panel (DCP)
On the turn slip indicator, where would the ball be during a skid? - Answers On the outside of the
turn
What provides pitch and roll references for the standby attitude indicator? - Answers Self-
contained gyro
Which of the following is not a capability of the FMS 3000?
A) Oceanic and remote operations between 80 degrees north and 80 degrees south
B) Minimum navigation performance standard's airspace
C) IFR instrument approach
D) Auto land - Answers Auto land
_______ processes transmissions from multiple GPS satellites simultaneously to calculate
navigation solutions? - Answers FMS 3000 flight management system
Which of the following is not a component of the FMS 3000?
A) Flight Management Computer
B) CDU-2000 Control display unit
C) Flight Data Recorder
, D) Database Unit - Answers Flight Data Recorder (FDR)
__________ accepts data from the GPS and computes a position estimate? - Answers Flight
Management Computer (FMC)
Each _________ provides an interface with the flight management computer (FMC).
A. integrated avionics processing system (IAPS)
B. CDU-2000 control display unit
C. air data computer (ADC)
D. database unit (DBU) - Answers B. CDU-2000 control display unit
ALL FMS data is visually displayed on ________. - Answers MFD, EADI, EHSI, and CDU
Which of the following is not a part of the initialization process for the FMS 3000?
A) Check NAV DATA
B) Checking currency of ACTIVE DATABASE
C) Checking time and setting correct UTC
D) Checking RAIM - Answers Checking RAIM
Which of the following is not a guideline for programming an airway leg on the FMS 3000?
A) If you try to enter or exit point not on airway, the FMS will generate message NOT ON
AIRWAY
B) Two airways that cross without a defined crossing intersection cannot be entered
C) Both entry and exit waypoint need not be on that airway
D) Both entry and exit waypoint must be on that airway - Answers Both entry and exit waypoint
need not be on that airway
