CSMLS lab safety guidelines
D- 📌📌- What are the major ways to deal with risk?
A) Ignore them; have employees sign non-liability contracts
B) Worker's compensation
C) Report to government
D) Tolerate, treat, terminate or transfer the risk
D- 📌📌 - Which of the following may be useful in helping to identify
laboratory hazards?
A) Safety Data Sheets
B) Inspections
C) Incident reports
D) All of the above
A- 📌📌- Personal monitoring can be used to measure noise exposure.
A) True
B) False
A- 📌📌 - Standards that identify allowable levels of exposure are available
for all chemicals.
A) True
B) False
D- 📌📌- An example of an engineering control is:
A) Full body coverage (gown, shoe covers, gloves, goggles)
B) Strictly enforced safety rules
C) All of the above
D) None of the above
B- 📌📌 - Threshold limit values were devised to identify the level of risk for
the most sensitive individuals in the workplace
,A) True
B) False
B- 📌📌 - Emergency response plans, training, and occupational health
programs are examples of:
A) Engineering controls
B) Administrative controls
C) personal protective equipment
D) None of the above
A- 📌📌- In the hierarchy of controls, which type of control is considered the
best?
A) Engineering controls
B) Administrative controls
C) PPE
D) Hiring controls
B- 📌📌- A task hazard analysis is:
A) Required for each job, by federal regulation
B) A good approach to identifying hazards
C) Should be performed by supervisors and managers, rather than workers
D) Is not part of an occupational health and safety management system
C- 📌📌 - The concept in legislation which indicates that, "employers must do
everything reasonable to protect the the health and safety of workers is
referred to as:
A) The rights of Workers
B) Refusal of unsafe work
C) Due diligence
D) Workers compensation
D- 📌📌 - In the internal responsibility system model, management is usually
required to:
A) correct hazards
B) provide training
,C) Investigate accidents
D) All of the above
A- 📌📌 - In the internal responsibility system model, employees are usually
required to:
A) Follow rules
B) Reduce absenteeism
C) Belong to a union
D) Have immunizations
D- 📌📌- Canadian laboratories are governed by:
A) Municipal legislation
B) Provincial legislation
C) Federal legislation
D) All of the above
B- 📌📌- Three major elements of WHMIS are:
A) SDS, training, PPE
B) Labels, training, SDS
C) SDS, inventory control, PPE
D) Training, PPE, , labels
B- 📌📌 - The Canada Criminal Code does not apply to laboratories or
medical facilities:
A) True
B) False
A- 📌📌 - Record keeping and documentation are important ways to
demonstrate enforcement and accountability:
A) True
B) False
D- 📌📌- The CSA group has published standards related to:
A) Fume hoods
, B) Biological safety cabinets
C) Use of respirators
D) All of the above
D- 📌📌 - If you have a safety issue that you cannot solve, you should first
contact:
A) The government health and safety regulatory agency
B) The media
C) Your safety committee
D) Your supervisor
A- 📌📌- A good safety culture promotes the following value:
A) All injuries are preventable
B) Employees are ultimately responsible for safety in the workplace
C) Only serious incidents should be reported
D) Unsafe workers should be terminated
B- 📌📌- A hazard is the same as a risk:
A) true
B) False
C- 📌📌- Which of the following is the best type of control against hazards?
A) Well-trained staff
B) Enforcement of PPE use
C) Engineering controls
D) Worksite inspections
B- 📌📌- The most important aspect of worksite inspections is:
A) To make sure everyone knows when they are occurring
B) To correct any deficiencies identified
C) senior management involvement
D) Conducting inspections weekly
D- 📌📌 - Which of the following types of emergencies may occur in
laboratories?
D- 📌📌- What are the major ways to deal with risk?
A) Ignore them; have employees sign non-liability contracts
B) Worker's compensation
C) Report to government
D) Tolerate, treat, terminate or transfer the risk
D- 📌📌 - Which of the following may be useful in helping to identify
laboratory hazards?
A) Safety Data Sheets
B) Inspections
C) Incident reports
D) All of the above
A- 📌📌- Personal monitoring can be used to measure noise exposure.
A) True
B) False
A- 📌📌 - Standards that identify allowable levels of exposure are available
for all chemicals.
A) True
B) False
D- 📌📌- An example of an engineering control is:
A) Full body coverage (gown, shoe covers, gloves, goggles)
B) Strictly enforced safety rules
C) All of the above
D) None of the above
B- 📌📌 - Threshold limit values were devised to identify the level of risk for
the most sensitive individuals in the workplace
,A) True
B) False
B- 📌📌 - Emergency response plans, training, and occupational health
programs are examples of:
A) Engineering controls
B) Administrative controls
C) personal protective equipment
D) None of the above
A- 📌📌- In the hierarchy of controls, which type of control is considered the
best?
A) Engineering controls
B) Administrative controls
C) PPE
D) Hiring controls
B- 📌📌- A task hazard analysis is:
A) Required for each job, by federal regulation
B) A good approach to identifying hazards
C) Should be performed by supervisors and managers, rather than workers
D) Is not part of an occupational health and safety management system
C- 📌📌 - The concept in legislation which indicates that, "employers must do
everything reasonable to protect the the health and safety of workers is
referred to as:
A) The rights of Workers
B) Refusal of unsafe work
C) Due diligence
D) Workers compensation
D- 📌📌 - In the internal responsibility system model, management is usually
required to:
A) correct hazards
B) provide training
,C) Investigate accidents
D) All of the above
A- 📌📌 - In the internal responsibility system model, employees are usually
required to:
A) Follow rules
B) Reduce absenteeism
C) Belong to a union
D) Have immunizations
D- 📌📌- Canadian laboratories are governed by:
A) Municipal legislation
B) Provincial legislation
C) Federal legislation
D) All of the above
B- 📌📌- Three major elements of WHMIS are:
A) SDS, training, PPE
B) Labels, training, SDS
C) SDS, inventory control, PPE
D) Training, PPE, , labels
B- 📌📌 - The Canada Criminal Code does not apply to laboratories or
medical facilities:
A) True
B) False
A- 📌📌 - Record keeping and documentation are important ways to
demonstrate enforcement and accountability:
A) True
B) False
D- 📌📌- The CSA group has published standards related to:
A) Fume hoods
, B) Biological safety cabinets
C) Use of respirators
D) All of the above
D- 📌📌 - If you have a safety issue that you cannot solve, you should first
contact:
A) The government health and safety regulatory agency
B) The media
C) Your safety committee
D) Your supervisor
A- 📌📌- A good safety culture promotes the following value:
A) All injuries are preventable
B) Employees are ultimately responsible for safety in the workplace
C) Only serious incidents should be reported
D) Unsafe workers should be terminated
B- 📌📌- A hazard is the same as a risk:
A) true
B) False
C- 📌📌- Which of the following is the best type of control against hazards?
A) Well-trained staff
B) Enforcement of PPE use
C) Engineering controls
D) Worksite inspections
B- 📌📌- The most important aspect of worksite inspections is:
A) To make sure everyone knows when they are occurring
B) To correct any deficiencies identified
C) senior management involvement
D) Conducting inspections weekly
D- 📌📌 - Which of the following types of emergencies may occur in
laboratories?
