Georgia Fire Protection Contractor
Exam Questions And Correct Answers
(Verified Answers) Plus Rationale2026
Q&A| Instant Download Pdf
1. What is the minimum water supply duration required for a Class I
standpipe system?
A. 10 minutes
B. 30 minutes
C. 60 minutes
D. 90 minutes
B. 30 minutes
Class I standpipe systems are designed to provide water for 30 minutes of
continuous operation to ensure fire department use.
2. Which NFPA standard primarily governs the installation of fire
sprinkler systems?
A. NFPA 10
B. NFPA 13
C. NFPA 25
D. NFPA 72
B. NFPA 13
NFPA 13 outlines the requirements for the design and installation of
automatic sprinkler systems.
3. A wet-pipe sprinkler system is most suitable for:
A. Areas subject to freezing
B. Temperatures below 40°F
C. Standard occupancy where freezing is not a concern
D. Industrial high-temperature areas
,C. Standard occupancy where freezing is not a concern
Wet-pipe systems are filled with water at all times and are best suited for
environments that do not freeze.
4. What type of fire extinguisher is recommended for electrical fires?
A. Water
B. Foam
C. CO2
D. Wet chemical
C. CO2
CO2 extinguishers remove oxygen and are non-conductive, making them
ideal for electrical fires.
5. What is the main purpose of a fire-resistance-rated door?
A. Provide ventilation
B. Control smoke and fire spread
C. Enhance building aesthetics
D. Support structural load
B. Control smoke and fire spread
Fire-resistance-rated doors are designed to slow the spread of fire and
smoke between compartments.
6. Which NFPA standard regulates the inspection, testing, and
maintenance of water-based fire protection systems?
A. NFPA 13
B. NFPA 25
C. NFPA 72
D. NFPA 70
B. NFPA 25
NFPA 25 provides requirements for periodic inspection, testing, and
maintenance of water-based fire protection systems.
7. What is the minimum pressure required at a sprinkler head for proper
operation in a wet system?
A. 5 psi
, B. 7 psi
C. 15 psi
D. 20 psi
C. 15 psi
Sprinkler heads require a minimum of 15 psi to ensure adequate water
distribution.
8. Which type of sprinkler system is used in areas prone to freezing?
A. Wet-pipe
B. Dry-pipe
C. Deluge
D. Pre-action
B. Dry-pipe
Dry-pipe systems keep pipes filled with air under pressure and release water
only when the sprinkler activates, preventing freezing.
9. What is the primary function of a fire pump?
A. Reduce water pressure
B. Increase water flow and pressure
C. Detect fires
D. Alarm occupants
B. Increase water flow and pressure
Fire pumps ensure sufficient water supply and pressure for sprinkler and
standpipe systems.
10. Which type of fire alarm system provides a continuous signal to a
remote monitoring center?
A. Manual
B. Proprietary
C. Central station
D. Local
C. Central station
Central station systems notify a remote monitoring center to ensure prompt
emergency response.
Exam Questions And Correct Answers
(Verified Answers) Plus Rationale2026
Q&A| Instant Download Pdf
1. What is the minimum water supply duration required for a Class I
standpipe system?
A. 10 minutes
B. 30 minutes
C. 60 minutes
D. 90 minutes
B. 30 minutes
Class I standpipe systems are designed to provide water for 30 minutes of
continuous operation to ensure fire department use.
2. Which NFPA standard primarily governs the installation of fire
sprinkler systems?
A. NFPA 10
B. NFPA 13
C. NFPA 25
D. NFPA 72
B. NFPA 13
NFPA 13 outlines the requirements for the design and installation of
automatic sprinkler systems.
3. A wet-pipe sprinkler system is most suitable for:
A. Areas subject to freezing
B. Temperatures below 40°F
C. Standard occupancy where freezing is not a concern
D. Industrial high-temperature areas
,C. Standard occupancy where freezing is not a concern
Wet-pipe systems are filled with water at all times and are best suited for
environments that do not freeze.
4. What type of fire extinguisher is recommended for electrical fires?
A. Water
B. Foam
C. CO2
D. Wet chemical
C. CO2
CO2 extinguishers remove oxygen and are non-conductive, making them
ideal for electrical fires.
5. What is the main purpose of a fire-resistance-rated door?
A. Provide ventilation
B. Control smoke and fire spread
C. Enhance building aesthetics
D. Support structural load
B. Control smoke and fire spread
Fire-resistance-rated doors are designed to slow the spread of fire and
smoke between compartments.
6. Which NFPA standard regulates the inspection, testing, and
maintenance of water-based fire protection systems?
A. NFPA 13
B. NFPA 25
C. NFPA 72
D. NFPA 70
B. NFPA 25
NFPA 25 provides requirements for periodic inspection, testing, and
maintenance of water-based fire protection systems.
7. What is the minimum pressure required at a sprinkler head for proper
operation in a wet system?
A. 5 psi
, B. 7 psi
C. 15 psi
D. 20 psi
C. 15 psi
Sprinkler heads require a minimum of 15 psi to ensure adequate water
distribution.
8. Which type of sprinkler system is used in areas prone to freezing?
A. Wet-pipe
B. Dry-pipe
C. Deluge
D. Pre-action
B. Dry-pipe
Dry-pipe systems keep pipes filled with air under pressure and release water
only when the sprinkler activates, preventing freezing.
9. What is the primary function of a fire pump?
A. Reduce water pressure
B. Increase water flow and pressure
C. Detect fires
D. Alarm occupants
B. Increase water flow and pressure
Fire pumps ensure sufficient water supply and pressure for sprinkler and
standpipe systems.
10. Which type of fire alarm system provides a continuous signal to a
remote monitoring center?
A. Manual
B. Proprietary
C. Central station
D. Local
C. Central station
Central station systems notify a remote monitoring center to ensure prompt
emergency response.
