EGT 120 003 FINAL QUESTIONS WITH COMPLETE
SOLUTIONS
a ___ is formed by two perpendicular lines Correct Answers
right
a _____ angle is formed by two perpendicular lines Correct
Answers right
a _____ auxiliary view is an auxiliary view projected from the
front view Correct Answers depth
a _____ is a foreshortened in two of the principle views and an
edge view in another Correct Answers inclined surface
a _____ section is a special type of orthographic drawing used to
revolve or align special features in order to clarify them or male
them easier to show in a section view Correct Answers aligned
a _____ section is created by passing an imaginary cutting plane
halfway though an object Correct Answers full
a _____ section is created by passing an imaginary cutting plane
halfway through the object Correct Answers half
a cylinders diameter should be dimensioned in the view where it
appears round Correct Answers false
a drawback of __ modeling is that you cannot create "holes"
without "covering" them Correct Answers surface
, a primary reason for using section views is to make
dimensioning easier Correct Answers false
a removed section is used when only half of an object needs to
be sectioned Correct Answers false
a secondary auxiliary view is projected from another aux view
Correct Answers true
almost all work in a parametric modeler can be edited or
redefined Correct Answers true
an inscribed circle is drawn inside a polygon so that each side of
the polygon is tangent to circle Correct Answers true
Auxiliary views are based on the use of an imaginary cutting
plane Correct Answers false
Auxiliary views do not use parallel projection techniques
Correct Answers true
Auxiliary views usually do not show hidden lines Correct
Answers true
constraint based modeling is also referred to as Correct Answers
parametric
construction lines should be straight, dark and need consistent
thickness Correct Answers false
SOLUTIONS
a ___ is formed by two perpendicular lines Correct Answers
right
a _____ angle is formed by two perpendicular lines Correct
Answers right
a _____ auxiliary view is an auxiliary view projected from the
front view Correct Answers depth
a _____ is a foreshortened in two of the principle views and an
edge view in another Correct Answers inclined surface
a _____ section is a special type of orthographic drawing used to
revolve or align special features in order to clarify them or male
them easier to show in a section view Correct Answers aligned
a _____ section is created by passing an imaginary cutting plane
halfway though an object Correct Answers full
a _____ section is created by passing an imaginary cutting plane
halfway through the object Correct Answers half
a cylinders diameter should be dimensioned in the view where it
appears round Correct Answers false
a drawback of __ modeling is that you cannot create "holes"
without "covering" them Correct Answers surface
, a primary reason for using section views is to make
dimensioning easier Correct Answers false
a removed section is used when only half of an object needs to
be sectioned Correct Answers false
a secondary auxiliary view is projected from another aux view
Correct Answers true
almost all work in a parametric modeler can be edited or
redefined Correct Answers true
an inscribed circle is drawn inside a polygon so that each side of
the polygon is tangent to circle Correct Answers true
Auxiliary views are based on the use of an imaginary cutting
plane Correct Answers false
Auxiliary views do not use parallel projection techniques
Correct Answers true
Auxiliary views usually do not show hidden lines Correct
Answers true
constraint based modeling is also referred to as Correct Answers
parametric
construction lines should be straight, dark and need consistent
thickness Correct Answers false
