AZ L-98 Metal Building Erection
Contractor Exam Questions And
Correct Answers (Verified Answers)
Plus Rationale2026 Q&A| Instant
Download Pdf
1. What is the primary purpose of a metal building erection contractor?
A. Designing residential structures
B. Installing plumbing systems
C. Erecting pre-engineered metal buildings
D. Performing HVAC maintenance
Rationale: The main role of a metal building erection contractor is to
assemble and erect pre-engineered metal building systems.
2. When erecting a metal building, which document provides the specific
layout and connections?
A. Material Safety Data Sheet
B. OSHA standards
C. Manufacturer’s erection drawings
D. Building permit
Rationale: Erection drawings from the manufacturer provide step-by-
step instructions for assembly and connections.
3. Which safety equipment is mandatory when working at heights during
metal building erection?
A. Hard hat and gloves
B. Fall protection harness and lanyard
C. Safety glasses
D. Steel-toed boots only
, Rationale: Fall protection is legally required and critical to prevent
injuries during high-elevation work.
4. What is the recommended method to prevent steel columns from
tipping during initial erection?
A. Using scaffolding
B. Temporary bracing
C. Welding to the foundation
D. Tightening bolts only
Rationale: Temporary bracing stabilizes columns until permanent
structural connections are made.
5. What type of foundation is typically required for metal buildings?
A. Floating slab
B. Concrete slab or footings
C. Gravel pad only
D. Wooden piers
Rationale: Concrete foundations or footings provide the necessary
support for structural loads.
6. Which fastener is most commonly used in metal building construction?
A. Nails
B. High-strength bolts
C. Wood screws
D. Plastic anchors
Rationale: High-strength bolts are designed to handle the structural
loads of steel connections.
7. What is the purpose of purlins in a metal building?
A. Support the foundation
B. Provide interior walls
C. Support roof panels
D. Anchor the building to soil
Rationale: Purlins are horizontal members that support roof
sheeting.
8. When installing metal wall panels, which technique ensures proper
alignment?
A. Nailing panels randomly
B. Using a chalk line and panel clips
C. Welding panels together
D. Overlapping panels without measurements
, Rationale: A chalk line ensures straight lines, and panel clips
maintain proper alignment.
9. What is the primary hazard of welding during metal building erection?
A. Noise
B. Dust
C. Fire and burns
D. Slips
Rationale: Welding creates sparks and heat, presenting fire and burn
hazards.
10. Which OSHA standard governs fall protection for construction
workers?
A. 1926 Subpart M
B. 1910 Subpart D
C. 1926 Subpart R
D. 1915 Subpart Z
Rationale: OSHA 1926 Subpart M outlines fall protection
requirements in construction.
11. During erection, steel members must be inspected for:
A. Color only
B. Weight
C. Straightness, defects, and proper size
D. Coating thickness only
Rationale: Inspecting members ensures structural integrity and
correct installation.
12. Which method is used to raise a steel beam into place safely?
A. Pushing manually
B. Cranes or hoists
C. Using ladders only
D. Rolling on the ground
Rationale: Cranes or hoists safely lift heavy steel beams into position.
13. Metal building erection contractors are responsible for:
A. Electrical wiring
B. Structural assembly
C. Plumbing layout
D. HVAC installation
Rationale: Their role focuses on assembling the building’s structural
system.
Contractor Exam Questions And
Correct Answers (Verified Answers)
Plus Rationale2026 Q&A| Instant
Download Pdf
1. What is the primary purpose of a metal building erection contractor?
A. Designing residential structures
B. Installing plumbing systems
C. Erecting pre-engineered metal buildings
D. Performing HVAC maintenance
Rationale: The main role of a metal building erection contractor is to
assemble and erect pre-engineered metal building systems.
2. When erecting a metal building, which document provides the specific
layout and connections?
A. Material Safety Data Sheet
B. OSHA standards
C. Manufacturer’s erection drawings
D. Building permit
Rationale: Erection drawings from the manufacturer provide step-by-
step instructions for assembly and connections.
3. Which safety equipment is mandatory when working at heights during
metal building erection?
A. Hard hat and gloves
B. Fall protection harness and lanyard
C. Safety glasses
D. Steel-toed boots only
, Rationale: Fall protection is legally required and critical to prevent
injuries during high-elevation work.
4. What is the recommended method to prevent steel columns from
tipping during initial erection?
A. Using scaffolding
B. Temporary bracing
C. Welding to the foundation
D. Tightening bolts only
Rationale: Temporary bracing stabilizes columns until permanent
structural connections are made.
5. What type of foundation is typically required for metal buildings?
A. Floating slab
B. Concrete slab or footings
C. Gravel pad only
D. Wooden piers
Rationale: Concrete foundations or footings provide the necessary
support for structural loads.
6. Which fastener is most commonly used in metal building construction?
A. Nails
B. High-strength bolts
C. Wood screws
D. Plastic anchors
Rationale: High-strength bolts are designed to handle the structural
loads of steel connections.
7. What is the purpose of purlins in a metal building?
A. Support the foundation
B. Provide interior walls
C. Support roof panels
D. Anchor the building to soil
Rationale: Purlins are horizontal members that support roof
sheeting.
8. When installing metal wall panels, which technique ensures proper
alignment?
A. Nailing panels randomly
B. Using a chalk line and panel clips
C. Welding panels together
D. Overlapping panels without measurements
, Rationale: A chalk line ensures straight lines, and panel clips
maintain proper alignment.
9. What is the primary hazard of welding during metal building erection?
A. Noise
B. Dust
C. Fire and burns
D. Slips
Rationale: Welding creates sparks and heat, presenting fire and burn
hazards.
10. Which OSHA standard governs fall protection for construction
workers?
A. 1926 Subpart M
B. 1910 Subpart D
C. 1926 Subpart R
D. 1915 Subpart Z
Rationale: OSHA 1926 Subpart M outlines fall protection
requirements in construction.
11. During erection, steel members must be inspected for:
A. Color only
B. Weight
C. Straightness, defects, and proper size
D. Coating thickness only
Rationale: Inspecting members ensures structural integrity and
correct installation.
12. Which method is used to raise a steel beam into place safely?
A. Pushing manually
B. Cranes or hoists
C. Using ladders only
D. Rolling on the ground
Rationale: Cranes or hoists safely lift heavy steel beams into position.
13. Metal building erection contractors are responsible for:
A. Electrical wiring
B. Structural assembly
C. Plumbing layout
D. HVAC installation
Rationale: Their role focuses on assembling the building’s structural
system.
