AFAB 110 FINAL EXAM QUESTIONS
AND ANSWERS
The standardized list of line types, perhaps in the form of a chart, is defined in many
references as the ________________. - Answer-Alphabet of line
Print reading is the process of analyzing a print to obtain information. This task involves
two principal elements: visualization and _____________. - Answer-Interpretation
If a D-size sheet of paper is properly cut, how many A-size sheets should result? -
Answer-8
For which of the following is least likely to be found on a basic parts list? - Answer-
Finish
A block that is important to read in the early stage of examining a print is the
___________ block, which helps determine if the print being observed is up-to-date. -
Answer-Revision history
In assembly drawings, there may be some parts that do not receive section lines, but
rather the area cut by the cutting-plane line is filled-in solid. Which of the following is not
relevant to this conventional practice? - Answer-Springs
If an inclined surface is perpendicular to the frontal plane, how does it appear in the
front view? - Answer-As an edge view (line)
Any auxiliary view projected from the front view could be called a ____________
auxiliary. - Answer-Depth
Which of the following statements concerning computer-generated auxiliary views is
true? - Answer-Auxiliary views are created as easily as principal views
American threads are specified by the number of threads per inch. If there are 12
threads per inch, then the pitch is ____________. - Answer-0.083
The term for how far a thread advances when the threaded part is rotated one complete
revolution, including multiple threads, is ____________. - Answer-Lead
, The term that describes the shape of the ridge (or grooves) that form the threads is
___________. - Answer-Form
The word print can best be used the same as the word _____________ - Answer-
Drawing
In many cases, the print is also an important part of a _______________ in the
industrial setting. - Answer-Contract
The study of print reading is closely related to the study of _____________, the general
term for creating drawings of objects in technical fields. - Answer-Drafting
PDF is an electronic file format that allows the user to share a drawing or image without
giving them the actual CAD data file. PDF stands for __________________. - Answer-
Portable Document Format
A voluntary guideline that establishes the method of representation for prints, as well as
other engineering practices, is a ________________. - Answer-Standard
Identify the line below that is fictitious. - Answer-Dotted line
Cutting-plane lines are easily identifiable due to the appearance of a(n) ___________
on each end of the line. - Answer-Arrowhead
Identify the line below that is to be drawn thick. - Answer-Cutting-plane line
Which of the following is least likely to be found on a basic parts list? - Answer-Finish
The word that basically means "cut in half" is _______________. - Answer-Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent to the
term __________. - Answer-Across-the-corners
In most CAD systems, the basic geometric forms used to create complex models are
referred to as _______________. - Answer-Primitives
As lines are parallel to each other, arcs are ________________ to each other. -
Answer-Concentric
Which of the following is a way to describe the point of tangency between two circles? -
Answer-Found on a line connecting the two center points
Which of the following cannot be defined by the way a plane intersects a cone? -
Answer-Ogee curve
AND ANSWERS
The standardized list of line types, perhaps in the form of a chart, is defined in many
references as the ________________. - Answer-Alphabet of line
Print reading is the process of analyzing a print to obtain information. This task involves
two principal elements: visualization and _____________. - Answer-Interpretation
If a D-size sheet of paper is properly cut, how many A-size sheets should result? -
Answer-8
For which of the following is least likely to be found on a basic parts list? - Answer-
Finish
A block that is important to read in the early stage of examining a print is the
___________ block, which helps determine if the print being observed is up-to-date. -
Answer-Revision history
In assembly drawings, there may be some parts that do not receive section lines, but
rather the area cut by the cutting-plane line is filled-in solid. Which of the following is not
relevant to this conventional practice? - Answer-Springs
If an inclined surface is perpendicular to the frontal plane, how does it appear in the
front view? - Answer-As an edge view (line)
Any auxiliary view projected from the front view could be called a ____________
auxiliary. - Answer-Depth
Which of the following statements concerning computer-generated auxiliary views is
true? - Answer-Auxiliary views are created as easily as principal views
American threads are specified by the number of threads per inch. If there are 12
threads per inch, then the pitch is ____________. - Answer-0.083
The term for how far a thread advances when the threaded part is rotated one complete
revolution, including multiple threads, is ____________. - Answer-Lead
, The term that describes the shape of the ridge (or grooves) that form the threads is
___________. - Answer-Form
The word print can best be used the same as the word _____________ - Answer-
Drawing
In many cases, the print is also an important part of a _______________ in the
industrial setting. - Answer-Contract
The study of print reading is closely related to the study of _____________, the general
term for creating drawings of objects in technical fields. - Answer-Drafting
PDF is an electronic file format that allows the user to share a drawing or image without
giving them the actual CAD data file. PDF stands for __________________. - Answer-
Portable Document Format
A voluntary guideline that establishes the method of representation for prints, as well as
other engineering practices, is a ________________. - Answer-Standard
Identify the line below that is fictitious. - Answer-Dotted line
Cutting-plane lines are easily identifiable due to the appearance of a(n) ___________
on each end of the line. - Answer-Arrowhead
Identify the line below that is to be drawn thick. - Answer-Cutting-plane line
Which of the following is least likely to be found on a basic parts list? - Answer-Finish
The word that basically means "cut in half" is _______________. - Answer-Bisect
If a hexagon is inscribed within a circle, the diameter of the circle is equivalent to the
term __________. - Answer-Across-the-corners
In most CAD systems, the basic geometric forms used to create complex models are
referred to as _______________. - Answer-Primitives
As lines are parallel to each other, arcs are ________________ to each other. -
Answer-Concentric
Which of the following is a way to describe the point of tangency between two circles? -
Answer-Found on a line connecting the two center points
Which of the following cannot be defined by the way a plane intersects a cone? -
Answer-Ogee curve
