ASNT Level III Basic exam Questions and Answers
Terms in this set (69)
Which of the following statements is true SNT-TC-1A is not intended to be used as a strict
concerning the usage of SNT-TC-1A? specification.
The SNT-TC-1A Interpretation Panel will Written and stated in general terms
respond to inquiries about SNT-TC-1A. The
inquiry must be:
May engage an outside service but is, nevertheless,
With regard to the training of NDT
personnel, the employer:
responsible for the certification of the company's NDT
personnel
SNT-TC-1A is intended as a guideline for To establish their own written practice that must be used as
employers: a strict specification.
The following is a statement in SNT-TC-1A The employer should review the detailed recommendations
"It is recognized that these guidelines may
not be appropriate for certain employers;
and modify them as necessary to meet its particular needs.
circumstances and / or applications." What
should be done if the guidelines are not
appropriate?
Who should be responsible to assess The individual's employer.
whether or not an individual should be
qualified and certified who does not
perform NDT, but monitors and evaluates
NDT?
To which of the following NDT methods is Holographic testing
SNT-TC-1A currently not applicable
ASNT intended that the recommendations With flexibility and reason
of SNT-TC-1A be applied
, Of the following, which is most appropriate The employer.
to determine the needs to qualify and
certify personnel whose only NDT function
is to operate digital thickness equipment.
Certification is Written testimony of qualification.
Use of SNT-TC-1A is mandatory when: It has been specified by the customer.
The basic levels of qualification Level I, II, III.
recommended by SNT-TC-1A are:
Weather any NDT personnel should be qualified and
Should personnel that operate ultrasonic
certified depends solely upon the needs of the employer
digital thickness measurement equipment
to qualified and certified and the requirements of the employer's customers or
clientele.
According to the recommendations of
The Trainee may not conduct nondestructive test
SNT-TC-1A which of the following is true
concerning a Trainee's activities? independently and may not report test results
According to SNT-TC-1A, which of the Must train and examine the Level I and II personnel in his or
following is not true for a Level III? her organization.
According to written instructions, an NDT Specific calibrations, Specific nondestructive test, specific
Level I may be qualified to perform: evaluations, and write reports of test results.
May a Level I independently perform, Yes, the intent in SNT-TC-1A is that the Level I may perform
evaluate and sign for results of
the above functions provided that they are in accordance
nondestructive test with supervision and
guidance from a Level II or III? with written instruction of a Level III or designee.
Which of the following statements is true
The qualifications for Level III equal and exceed those of
concerning the definitions of Trainee, Level
I, II and III in SNT-TC-1A? Level II.
Which of the following is not within the Establish techniques
scope of activities of a Level II individual,
as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I
A recommended in SNT-TC-1A, a Level II:
personnel.
According SNT-TC-1A which of the The Level III shall be capable of evaluating test results in
following is true for a Level III? terms of codes standards and specifications.
In Accordance with SNT-TC-1A, who is The employer.
responsible for establishing a written
practice for the control and administration
of NDT personnel training, examination and
certification?
The responsibility of each level of Should be described in the employer's written practice only
certification for determining the
acceptability of materials or components: if they are different form SNT-TC-1A recommendations.
Terms in this set (69)
Which of the following statements is true SNT-TC-1A is not intended to be used as a strict
concerning the usage of SNT-TC-1A? specification.
The SNT-TC-1A Interpretation Panel will Written and stated in general terms
respond to inquiries about SNT-TC-1A. The
inquiry must be:
May engage an outside service but is, nevertheless,
With regard to the training of NDT
personnel, the employer:
responsible for the certification of the company's NDT
personnel
SNT-TC-1A is intended as a guideline for To establish their own written practice that must be used as
employers: a strict specification.
The following is a statement in SNT-TC-1A The employer should review the detailed recommendations
"It is recognized that these guidelines may
not be appropriate for certain employers;
and modify them as necessary to meet its particular needs.
circumstances and / or applications." What
should be done if the guidelines are not
appropriate?
Who should be responsible to assess The individual's employer.
whether or not an individual should be
qualified and certified who does not
perform NDT, but monitors and evaluates
NDT?
To which of the following NDT methods is Holographic testing
SNT-TC-1A currently not applicable
ASNT intended that the recommendations With flexibility and reason
of SNT-TC-1A be applied
, Of the following, which is most appropriate The employer.
to determine the needs to qualify and
certify personnel whose only NDT function
is to operate digital thickness equipment.
Certification is Written testimony of qualification.
Use of SNT-TC-1A is mandatory when: It has been specified by the customer.
The basic levels of qualification Level I, II, III.
recommended by SNT-TC-1A are:
Weather any NDT personnel should be qualified and
Should personnel that operate ultrasonic
certified depends solely upon the needs of the employer
digital thickness measurement equipment
to qualified and certified and the requirements of the employer's customers or
clientele.
According to the recommendations of
The Trainee may not conduct nondestructive test
SNT-TC-1A which of the following is true
concerning a Trainee's activities? independently and may not report test results
According to SNT-TC-1A, which of the Must train and examine the Level I and II personnel in his or
following is not true for a Level III? her organization.
According to written instructions, an NDT Specific calibrations, Specific nondestructive test, specific
Level I may be qualified to perform: evaluations, and write reports of test results.
May a Level I independently perform, Yes, the intent in SNT-TC-1A is that the Level I may perform
evaluate and sign for results of
the above functions provided that they are in accordance
nondestructive test with supervision and
guidance from a Level II or III? with written instruction of a Level III or designee.
Which of the following statements is true
The qualifications for Level III equal and exceed those of
concerning the definitions of Trainee, Level
I, II and III in SNT-TC-1A? Level II.
Which of the following is not within the Establish techniques
scope of activities of a Level II individual,
as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I
A recommended in SNT-TC-1A, a Level II:
personnel.
According SNT-TC-1A which of the The Level III shall be capable of evaluating test results in
following is true for a Level III? terms of codes standards and specifications.
In Accordance with SNT-TC-1A, who is The employer.
responsible for establishing a written
practice for the control and administration
of NDT personnel training, examination and
certification?
The responsibility of each level of Should be described in the employer's written practice only
certification for determining the
acceptability of materials or components: if they are different form SNT-TC-1A recommendations.
