pipe�tter exam study guide 1
Study online at https://quizlet.com/_fzyrdz
1. what is the take out of a 10" short radius weld 90 elbow: 10"
2. acetylene bottles have fusible link that melts at what temp: 220 degrees or 212 best
answer
3. what is the pressure inside of oxygen cylinder: 2000lbs/2500lbs
4. where the tags for ox bottles are located: the shoulder of the bottle
5. which direction does a hacksaw blade cut: forward
6. what tubing bend is used in installation of pipe: hickey
7. when handling a newly threaded piece of pipe you must be careful because
its: sharp
8. what is the purpose of the foot pedal on a pipe threading machine: safety
9. when welding socket weld �ttings what is the process: shoulder all the way then remove
1/16 from shoulder and tack weld
10. which code governs the installation of process piping: B31.3
11. which valve is not appropriate as a boiler steam outlet valve on high pressure
boilers: ball valve
12. who is responsible to qualify a welder: employer
13. what temperature does an oxy cutting torch run at: 5438 or 6630
14. which stamp is required for the assembly of high pressure boilers: "A" stamp
15. high pressure pipe welding and welder must be quali�ed to section ______ of
the ASME code: 9
16. what welding position is commonly used for welding test that will qualify you
for all positions: 6G
17. what is the hardest welding position to use: 6
18. a stop valve and check valve are installed in the: feed water line
19. when piping up a low water cut o device to a boiler, the device must be
piped to what height in relation to the level of the gauge glass: no lower than the
visible part of the gauge glass
20. what is the minimum size of the drain pipe and the blow valve required on a
low water cut o that has a seperate oat chamber: 3/4'
21. the valve that o ers the least resistance to ow us the ____ valve: gate
1/3
Study online at https://quizlet.com/_fzyrdz
1. what is the take out of a 10" short radius weld 90 elbow: 10"
2. acetylene bottles have fusible link that melts at what temp: 220 degrees or 212 best
answer
3. what is the pressure inside of oxygen cylinder: 2000lbs/2500lbs
4. where the tags for ox bottles are located: the shoulder of the bottle
5. which direction does a hacksaw blade cut: forward
6. what tubing bend is used in installation of pipe: hickey
7. when handling a newly threaded piece of pipe you must be careful because
its: sharp
8. what is the purpose of the foot pedal on a pipe threading machine: safety
9. when welding socket weld �ttings what is the process: shoulder all the way then remove
1/16 from shoulder and tack weld
10. which code governs the installation of process piping: B31.3
11. which valve is not appropriate as a boiler steam outlet valve on high pressure
boilers: ball valve
12. who is responsible to qualify a welder: employer
13. what temperature does an oxy cutting torch run at: 5438 or 6630
14. which stamp is required for the assembly of high pressure boilers: "A" stamp
15. high pressure pipe welding and welder must be quali�ed to section ______ of
the ASME code: 9
16. what welding position is commonly used for welding test that will qualify you
for all positions: 6G
17. what is the hardest welding position to use: 6
18. a stop valve and check valve are installed in the: feed water line
19. when piping up a low water cut o device to a boiler, the device must be
piped to what height in relation to the level of the gauge glass: no lower than the
visible part of the gauge glass
20. what is the minimum size of the drain pipe and the blow valve required on a
low water cut o that has a seperate oat chamber: 3/4'
21. the valve that o ers the least resistance to ow us the ____ valve: gate
1/3
