FIREFIGHTER 1 & 2 FINAL EXAM 2025 VERIFIED QUESTIONS AND ANSWERS GRADED A+
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks
and steel? - (ANSWER)Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? - (ANSWER)Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? - (ANSWER)Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a residential
fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - (ANSWER)are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - (ANSWER)Flow pressure
Proportioning methods: When would batch mixing not be effective? - (ANSWER)On large incidents
because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - (ANSWER)Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - (ANSWER)Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. - (ANSWER)Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. -
(ANSWER)Hose caps
, FIREFIGHTER 1 & 2 FINAL EXAM 2025 VERIFIED QUESTIONS AND ANSWERS GRADED A+
Who should begin stabilization of a patient trapped inside a vehicle? - (ANSWER)A rescuer with EMT
training
Name one element of patient removal: - (ANSWER)Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - (ANSWER)165 |
76
Cribbing is most commonly used to _________. - (ANSWER)stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
(ANSWER)Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-mounted
twin-agent units, and vehicle mounted tank systems? - (ANSWER)Premixing method
One of the most important practices to address to building occupants about fire safety is _______. -
(ANSWER)making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. -
(ANSWER)Static presssure
Energy created by moving parts on machines, such as belts and bearings - (ANSWER)Mechanical heat
energy
Water received from treatment facilities is delivered to ________ storage tanks before being distributed
throughout the area served. - (ANSWER)elevated
State 3 facts about service testing: - (ANSWER)1. The test area should be smooth and free from rock and
debris
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks
and steel? - (ANSWER)Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? - (ANSWER)Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? - (ANSWER)Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a residential
fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - (ANSWER)are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - (ANSWER)Flow pressure
Proportioning methods: When would batch mixing not be effective? - (ANSWER)On large incidents
because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - (ANSWER)Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - (ANSWER)Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. - (ANSWER)Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. -
(ANSWER)Hose caps
, FIREFIGHTER 1 & 2 FINAL EXAM 2025 VERIFIED QUESTIONS AND ANSWERS GRADED A+
Who should begin stabilization of a patient trapped inside a vehicle? - (ANSWER)A rescuer with EMT
training
Name one element of patient removal: - (ANSWER)Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - (ANSWER)165 |
76
Cribbing is most commonly used to _________. - (ANSWER)stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
(ANSWER)Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-mounted
twin-agent units, and vehicle mounted tank systems? - (ANSWER)Premixing method
One of the most important practices to address to building occupants about fire safety is _______. -
(ANSWER)making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. -
(ANSWER)Static presssure
Energy created by moving parts on machines, such as belts and bearings - (ANSWER)Mechanical heat
energy
Water received from treatment facilities is delivered to ________ storage tanks before being distributed
throughout the area served. - (ANSWER)elevated
State 3 facts about service testing: - (ANSWER)1. The test area should be smooth and free from rock and
debris
