COMSC 120 || A+ Certified.
What is Disk Editor correct answers If data is hidden in a partition gap, a disk editor utility
could also be used to alter information in the disk's partition table.
a disk editor gives you the most flexibility in testing, it
might not be capable of examining a compressed file's contents, such as a .zip file or an
Outlook .pst file.
Examples of disk editors:Norton DiskEdit, WinHex, or Hex Workshop.
SHA-1 Secure Hash Algorithm correct answers A forensic hashing algorithm created by
NIST to determine whether data in a file or on storage media has been altered.
SHA-1 provides better accuracy than other hashing methods, such as MD5 or CRC-32.
-useful for validating digital evidence collected
from files and storage media.
- The two most common hashing algorithms for forensics purposes are currently MD5 and
SHA-1,
-An easy way to test lossless compression is to perform an MD5 or SHA-1 hash on a file
before and after it's compressed.
NIST National Institute of Standards and Technology correct answers -publishes articles,
provides tools, and
creates procedures for testing and validating computer forensics software.
-NIST has also developed several tools for evaluating drive-imaging tools
-NIST created the National Software Reference Library (NSRL) project with the goal of
collecting all known hash values for commercial software and
OS files.
Forensic workstations can be divided into how many categorizes? correct answers 3, forensic
workstations can be divided into the following categories:
• Stationary workstation—A tower with several bays and many peripheral devices
• Portable workstation—A laptop computer with a built-in LCD monitor and almost as
many bays and peripherals as a stationary workstation
• Lightweight workstation—Usually a laptop computer built into a carrying case with a
small selection of peripheral options
What is DIR used for correct answers Windows 2000, XP, and Vista, the Dir command
shows you the file owner if you have
multiple users on the system or network.
IBM correct answers IBM uses High Performance File System (HPFS)file system for its
OS/2 operating system.
The first tools that analyzed and extracted data from floppy disks and hard disks were MS-
DOS tools for IBM PC file systems.
Disk to disk copy correct answers The simplest method of duplicating a drive is using a tool
that makes a direct disk-to-disk copy from the suspect drive to the target drive.
subfunctions of reconstruction:
Copies from a suspect drive to a target drive (disk-to-disk copy), adjusting the target
drive's geometry to match the suspect drive.
, -Hardware duplicators are the fastest way to copy data from one disk to another.
Image file correct answers A bit-stream image is the file containing the bit-stream copy of all
data on a disk or disk partition.
The data a computer forensics acquisition tool collects is stored as an image file in one of
three formats. Two formats are open source and the third is proprietary
Image files can be reduced by as much as 50% of
the original.
virtual machine correct answers Virtual machines enable you run
another OS on an existing physical computer (known as the host computer) by emulating a
computer's hardware environment.
Typically, a virtual machine consists of several files. The two main files are the configuration
file containing hardware settings, such as RAM, network configurations, port settings, and so
on, and the virtual hard disk file, which contains the boot loader program, OS files, and users'
data files.
BOOT.ini correct answers startup files for Windows XP are located in the root folder of the
system partition.
Boot.ini A file that specifies the Windows path installation and a variety of other startup
options.
The NT Loader (Ntldr) file loads the OS. When the system is powered on, Ntldr reads the
Boot.ini file, which displays a boot menu.
Boot.ini specifies the Windows XP
path installation and contains options for selecting the Windows version.
Registry correct answers —A collection of files containing system and user information.
When Microsoft created Windows 95, it consolidated initialization (.ini) files into the
Registry,
a database that stores hardware and software configuration information, network connections,
user preferences (including usernames and passwords), and setup information.
Where do FAT files reside
FAT/NTFS correct answers When the OS stores data in a FAT file system, it assigns a
starting cluster position to a file.
Data for the file is written to the first sector of the first assigned cluster. When this first
assigned cluster is filled and runs out of room, FAT assigns the next available cluster.
The FAT database
is typically written to a disk's outermost track and contains filenames, directory names,
date and time stamps, the starting cluster number, and file attributes (archive, hidden, system,
and read-only).
Sector numbers, however, are referred to as physical addresses because they reside at
the hardware or firmware level and go from address 0 (the first sector on the disk) to the
last sector on the disk.
file allocation table (FAT), which is really a table that resides at the very "top" of the volume.
Areal density correct answers refers to the number of bits in one square inch of a disk platter
and includes the unused space between tracks.
*It is handled at the drive's hardware or firmware level.
What is Disk Editor correct answers If data is hidden in a partition gap, a disk editor utility
could also be used to alter information in the disk's partition table.
a disk editor gives you the most flexibility in testing, it
might not be capable of examining a compressed file's contents, such as a .zip file or an
Outlook .pst file.
Examples of disk editors:Norton DiskEdit, WinHex, or Hex Workshop.
SHA-1 Secure Hash Algorithm correct answers A forensic hashing algorithm created by
NIST to determine whether data in a file or on storage media has been altered.
SHA-1 provides better accuracy than other hashing methods, such as MD5 or CRC-32.
-useful for validating digital evidence collected
from files and storage media.
- The two most common hashing algorithms for forensics purposes are currently MD5 and
SHA-1,
-An easy way to test lossless compression is to perform an MD5 or SHA-1 hash on a file
before and after it's compressed.
NIST National Institute of Standards and Technology correct answers -publishes articles,
provides tools, and
creates procedures for testing and validating computer forensics software.
-NIST has also developed several tools for evaluating drive-imaging tools
-NIST created the National Software Reference Library (NSRL) project with the goal of
collecting all known hash values for commercial software and
OS files.
Forensic workstations can be divided into how many categorizes? correct answers 3, forensic
workstations can be divided into the following categories:
• Stationary workstation—A tower with several bays and many peripheral devices
• Portable workstation—A laptop computer with a built-in LCD monitor and almost as
many bays and peripherals as a stationary workstation
• Lightweight workstation—Usually a laptop computer built into a carrying case with a
small selection of peripheral options
What is DIR used for correct answers Windows 2000, XP, and Vista, the Dir command
shows you the file owner if you have
multiple users on the system or network.
IBM correct answers IBM uses High Performance File System (HPFS)file system for its
OS/2 operating system.
The first tools that analyzed and extracted data from floppy disks and hard disks were MS-
DOS tools for IBM PC file systems.
Disk to disk copy correct answers The simplest method of duplicating a drive is using a tool
that makes a direct disk-to-disk copy from the suspect drive to the target drive.
subfunctions of reconstruction:
Copies from a suspect drive to a target drive (disk-to-disk copy), adjusting the target
drive's geometry to match the suspect drive.
, -Hardware duplicators are the fastest way to copy data from one disk to another.
Image file correct answers A bit-stream image is the file containing the bit-stream copy of all
data on a disk or disk partition.
The data a computer forensics acquisition tool collects is stored as an image file in one of
three formats. Two formats are open source and the third is proprietary
Image files can be reduced by as much as 50% of
the original.
virtual machine correct answers Virtual machines enable you run
another OS on an existing physical computer (known as the host computer) by emulating a
computer's hardware environment.
Typically, a virtual machine consists of several files. The two main files are the configuration
file containing hardware settings, such as RAM, network configurations, port settings, and so
on, and the virtual hard disk file, which contains the boot loader program, OS files, and users'
data files.
BOOT.ini correct answers startup files for Windows XP are located in the root folder of the
system partition.
Boot.ini A file that specifies the Windows path installation and a variety of other startup
options.
The NT Loader (Ntldr) file loads the OS. When the system is powered on, Ntldr reads the
Boot.ini file, which displays a boot menu.
Boot.ini specifies the Windows XP
path installation and contains options for selecting the Windows version.
Registry correct answers —A collection of files containing system and user information.
When Microsoft created Windows 95, it consolidated initialization (.ini) files into the
Registry,
a database that stores hardware and software configuration information, network connections,
user preferences (including usernames and passwords), and setup information.
Where do FAT files reside
FAT/NTFS correct answers When the OS stores data in a FAT file system, it assigns a
starting cluster position to a file.
Data for the file is written to the first sector of the first assigned cluster. When this first
assigned cluster is filled and runs out of room, FAT assigns the next available cluster.
The FAT database
is typically written to a disk's outermost track and contains filenames, directory names,
date and time stamps, the starting cluster number, and file attributes (archive, hidden, system,
and read-only).
Sector numbers, however, are referred to as physical addresses because they reside at
the hardware or firmware level and go from address 0 (the first sector on the disk) to the
last sector on the disk.
file allocation table (FAT), which is really a table that resides at the very "top" of the volume.
Areal density correct answers refers to the number of bits in one square inch of a disk platter
and includes the unused space between tracks.
*It is handled at the drive's hardware or firmware level.