CWB 47.1 Exam Questions & Answers Verified 100% Correct

CWB 47.1 Exam Questions & Answers Verified 100% Correct A company doing only erection work involving welding must have a pony in order to be certified to CSA standard W47.1 True or false? - ANSWER -False When must the company inform the Canadian bureau of any loss or change in welding engineering or supervisory personnel? A) immediately B) after 3 months C) after 6 months D) the doesn't have to inform as long as the personnel is replaced after a year - ANSWER -A The company shall designate an individual who, irrespective of each other responsibilities, shall have defined authority and responsibility for ensuring that the requirements of CSA Standard W47.1 are implemented and maintained True or false? - ANSWER -True What are the duties of the welding engineer? A) Provide engineering support to the company as required. B) Development of new welding procedures C) Periodic reviews of the company's welding practices D) preparation of WPSs and WPDSs E) all of the above - ANSWER -E A welding supervisor with two years of fabrication experience is acceptable for division 1 company? True or false? - ANSWER -False Each supervisor shall have knowledge of? A) weld faults B) Quality control C) Estimating D) both a & c pertaining to directly related to their work. - ANSWER -D Each supervisor shall be able to read drawings and to properly interpret welding symbols. True or false? - ANSWER -True Who is responsible for ensuring that the companies personnel involved in welding are qualified and working with approved welding procedures in the shop or in the field? A) the welders themselves B) no one is responsible because the welders have shown their performance abilities when they are qualified in accordance with the standard C) the welding supervisor D) the welding engineer must ensure a satisfactory performance of welders in production welding through continuous guidance and instruction - ANSWER -C If there is a reason to doubt the welders ability, his/her qualification is suspended immediately and shall be required to pass a check test in the position and class held True of false? - ANSWER -True What types of identification cards are issued to welders by the Canadian welding bureau? A) transferable card when qualification is based on standard test assemblies B) transferable card when qualification is based on non standard test assemblies C) nontransferable card when qualification is based on non standard test assemblies D) a letter in lieu of an identification card E) a, c, & d - ANSWER -E Who owns the welder cards that are issued by the Canadian welding bureau? A) the company B) the welder C) the Canadian welding bureau D) the welding supervisor - ANSWER -C Who is responsible for ensuring that welders identification cards or copies thereof can be produced as proof that a welder has valid qualification? A) the welder B) the Canadian welding bureau C) the company D) the welding supervisor - ANSWER -C If a welder has qualified on a standard test assembly, what Range of material thickness is he/she now qualified to weld? A) 1.5 mm (1/16 in) and thicker B) 3 mm (1/8 in) and thicker C) up to 5 mm (3/6 in) D) 3 mm (1/8 in) to 12 mm (1/2 in) - ANSWER -B For how long does a welders qualification remain in effect? A) indefinitely B) six months C) one year D) two years - ANSWER -D A welders qualification may be revoked by the Canadian Welding Bureau if the welder has NOT been engaged in a given process for a period of three months or more. True or false? - ANSWER -True For how long does a welding operators qualification remain in effect? A) indefinitely, unless there is a reason to question his/her ability B) six months C) one year D) two years - ANSWER -A Tack welders must be qualified. True or false? - ANSWER -True