BICSI TECHNICIAN EXAM Questions and Answers 2025/2026

BICSI TECHNICIAN EXAM Questions and Answers 2025/2026 L Rating - answer-A firestops ability to provide a smoke stop. (air leakage rate) To avoid damaging cable jacket, how often must you securely fasten electrical nonmetallic tubing (ENT) - answer-3 Feet so it does not damage the cable What is the minimum dedicated power requirement of a telecommunications enclosure - answer-120 V ac/20 The clearance behind the PBB when mounted, should be no less than- - answer-2inch clearance behind the PBB when mounted When installing a plywood backboard, you should use galvanized screws that are a minimum of ______ longer than the depth of the wall covering, including the plywood - answer-0.5in The use of under carpet telecommunications cable should be limited to: - answer-The interconnection point between horizontal cabling and UTC is a transition point (TP) Two 90-degree bends are allowed in any one conduit segment. A third bend may be acceptable under certain situations - answer-Runs under 33 feet When installing racks and cabinets on an access floor, what should they be secured to? - answer-The frame When placing cabinets on an access floor, how should the cabinets be aligned? - answer-One edge flush with the floor tile cut lineWhat is a telecommunications enclosure TE used for? - answer-May be used to provide a suitable option for moves, adds, and changes without compromising infection control measures and other restrictions What size threaded rod would you typically use in a heavy duty ladder rack installation? - answer-5/8in