exam well answered
When a standard is adopted by an agency having authority, the standard becomes a ______ and
may contain requirements for installation. - correct answer ✔✔ Code
Prior to working in a particular jurisdiction, alarm technicians should consult _____. - correct
answer ✔✔ Statues, ordinances, board rules, all of the above.
An organization, office, or an individual, responsible for enforcing the requirements of a code or
standard, or for approving equipment, materials, or installation, or a procedure, is known as the
_____. - correct answer ✔✔ Authority Having Jurisdiction
An organization or association's published guideline containing recommended installation
practices known as _____. - correct answer ✔✔ Standard
True or False? The term "shall" when found in a code is something that must be done, while the
term "should" is a recommendation. - correct answer ✔✔ True
Electrons have what type of charge? - correct answer ✔✔ Negative
Where are valence electrons located? - correct answer ✔✔ In the outer shell
True or False? Stable atoms have the outer electron shells completely filled? - correct answer
✔✔ True
What is the unit measurement for resistance? - correct answer ✔✔ Ohms
, What is the relationship between resistance and conductance? - correct answer ✔✔
Conductance = 1/resistance
In a _____ circuit, electrons have one or more paths. - correct answer ✔✔ Parallel
_____ is the same at all points in a series circuit. - correct answer ✔✔ Current
In a series circuit, _____ is additive. - correct answer ✔✔ Resistance
True or False? In a series circuit, the total of all voltage drops is always equal to the supplied
voltage? - correct answer ✔✔ True
To convert kilo-ohms to ohms, the provided value must be _____ _____ 1,000. - correct answer
✔✔ Multiplied by
Convert 500 miliamps to amps. - correct answer ✔✔ .5 amps
The signal used to represent _____ is the Greek letter omega. - correct answer ✔✔ Resistance
In the ohm's law formula the I is used to represent current stands for _____. - correct answer
✔✔ Intensity
A transformer is used to _____ voltage in a circuit. - correct answer ✔✔ Increase or Decrease
A loose electrical connection will raise resistance in a circuit. What other factor will result? -
correct answer ✔✔ Temperature