NEIEP 100 Final Exam Study Guide 2025: IUEC Practice Questions & Answers

Page 1 of 9


NEIEP 100 FINAL EXAMS (LATEST 2025 UPDATES

STUDY BUNDLE WITH COMPLETE SOLUTIONS)

QUESTIONS AND VERIFIED ANSWERS | 100%

CORRECT | GRADE A

How to turn Kg to Lbs .....ANSWER.....Multiply by 2.2

How to turn Lbs to Kg .....ANSWER.....Divide by 2.2

Wheat types of detail drawings would you expect to see on a

elevator installation job .....ANSWER.....Standardized, electrical,

structural and hoistway drawings

Installing hoistway limit switches what drawing will the mechanic

reference .....ANSWER.....Standardized detail drawing

Where should you place a lifeline when installing them

.....ANSWER.....close enough to permit tying off prior to entering

millimeters to inches .....ANSWER.....divide by 25.4

Inches to millimeters .....ANSWER.....multiply by 25.4

, Page 2 of 9


Drawings that are approved by the building owner or

representative are labeled with what term .....ANSWER.....Final

In a standard orthographic projection drawing, where is the

placement of a back view if needed .....ANSWER.....Off to one

side of the working drawing

What is the most common drawing method for showing three

sides of an object at once in the elevator industry

.....ANSWER.....Isometric Drawing

How would you describe a class 3 fit for shaft and bore

diameters .....ANSWER.....Snuggest possible allowance

Which class of bolts provides the highest level of precision

.....ANSWER.....Class 3 bolts

What is the difference between U.S standard and metric

standard threads? .....ANSWER.....U.S. standard measures threads

per inch; metric standard measures by pitch of the threads