MOBILE CRANE NCCER FINAL
EXAM 2025/2026 BANK COMPLETE
400 QUESTIONS WITH DETAILED
VERIFIED ANSWERS (100%
CORRECT ANSWERS) /
LATEST UPDATE ALREADY
GRADED A+
Which of the following will cause kinks in a wire rope sling
- ....ANSWER...a load without softeners
Crane hooks must not be twisted in excess of -
....ANSWER...10 degrees
How many randomly distributed broken wires in one lay
of a wire rope sling will make it necessary to replace the
sling - ....ANSWER...10
You are inspecting a wire rope sling, assume that you have
the proper tools to check for wear on the sling, what are
you looking for to remove a wire rope sling from service? -
1
,....ANSWER...wear of 1/3 the diameter of wire rope
lifting lugs should be used for straight, vertical lifting only
- ....ANSWER...True
Inspections that are mandated are referred to as what type
of inspections? - ....ANSWER...compliance inspections
frequent inspections are conducted in what intervals -
....ANSWER...daily-to monthly
periodic inspections are much deeper than frequent
inspections and conducted in what intervals -
....ANSWER...monthly- yearly intervals (1-12 months)
Monthly inspections documentation must be retained by
employer conducting the inspections for a minimum of
months - ....ANSWER...three (3)
Annual inspections documentation must be retained for a
minimum of year(s) - ....ANSWER...1 (one)
What is safety data sheet - ....ANSWER...A
2
,documentation that accompany and hazards
substance. it identifies the substance & provides the
exposure limits, physical & chemical characteristics,
the kind of hazard it presents, precautions for safe
handling & use specific control meausres
What is the purpose of lubricants - ....ANSWER...use to
reduce friction between surfaces, and helps transfer
heat from moving parts
What if a DOT regulation imposes a higher standard of
care than a local law, ordinance, or regulation? -
....ANSWER...The stricter DOT standard must be
followed
What is the maximum weight for a single axis or tandem
axle? - ....ANSWER...single axle- 20,000 lbs
tandem axles- 34,000 lbs
What is the maximum weight for a tractor trailer
combination? - ....ANSWER...80,000 lbs
What is the maximum length for a straight truck/ trailer?
- ....ANSWER...65'
3
, What is the maximum width excluding mirrors? -
....ANSWER...2.6 meters (102.4'')
If the crane's jib is offset 5 degrees as opposed to an
original 15 degrees and the boom angle remains constant
you would expect the load radius to do what? -
....ANSWER...To be reduced
How does the operator verify the LMs boom length or load
radius reading? - ....ANSWER...accutal measurements
If the rated capacity of the crane is above the solid line or
within the shaded areas or has an asterisk next to it this
means the capacity is based on: - ....ANSWER...85%
tipping
4
EXAM 2025/2026 BANK COMPLETE
400 QUESTIONS WITH DETAILED
VERIFIED ANSWERS (100%
CORRECT ANSWERS) /
LATEST UPDATE ALREADY
GRADED A+
Which of the following will cause kinks in a wire rope sling
- ....ANSWER...a load without softeners
Crane hooks must not be twisted in excess of -
....ANSWER...10 degrees
How many randomly distributed broken wires in one lay
of a wire rope sling will make it necessary to replace the
sling - ....ANSWER...10
You are inspecting a wire rope sling, assume that you have
the proper tools to check for wear on the sling, what are
you looking for to remove a wire rope sling from service? -
1
,....ANSWER...wear of 1/3 the diameter of wire rope
lifting lugs should be used for straight, vertical lifting only
- ....ANSWER...True
Inspections that are mandated are referred to as what type
of inspections? - ....ANSWER...compliance inspections
frequent inspections are conducted in what intervals -
....ANSWER...daily-to monthly
periodic inspections are much deeper than frequent
inspections and conducted in what intervals -
....ANSWER...monthly- yearly intervals (1-12 months)
Monthly inspections documentation must be retained by
employer conducting the inspections for a minimum of
months - ....ANSWER...three (3)
Annual inspections documentation must be retained for a
minimum of year(s) - ....ANSWER...1 (one)
What is safety data sheet - ....ANSWER...A
2
,documentation that accompany and hazards
substance. it identifies the substance & provides the
exposure limits, physical & chemical characteristics,
the kind of hazard it presents, precautions for safe
handling & use specific control meausres
What is the purpose of lubricants - ....ANSWER...use to
reduce friction between surfaces, and helps transfer
heat from moving parts
What if a DOT regulation imposes a higher standard of
care than a local law, ordinance, or regulation? -
....ANSWER...The stricter DOT standard must be
followed
What is the maximum weight for a single axis or tandem
axle? - ....ANSWER...single axle- 20,000 lbs
tandem axles- 34,000 lbs
What is the maximum weight for a tractor trailer
combination? - ....ANSWER...80,000 lbs
What is the maximum length for a straight truck/ trailer?
- ....ANSWER...65'
3
, What is the maximum width excluding mirrors? -
....ANSWER...2.6 meters (102.4'')
If the crane's jib is offset 5 degrees as opposed to an
original 15 degrees and the boom angle remains constant
you would expect the load radius to do what? -
....ANSWER...To be reduced
How does the operator verify the LMs boom length or load
radius reading? - ....ANSWER...accutal measurements
If the rated capacity of the crane is above the solid line or
within the shaded areas or has an asterisk next to it this
means the capacity is based on: - ....ANSWER...85%
tipping
4
