ICC Vapor Recovery 1 Pt. 2 Exam 2026
Questions and Answers
Under Dispenser Containment is required to be designed and constructed in
accordance with ____.
a. the appropriate Executive Order
b. generally accepted secondary containment practices
c. standards of an independent testing organization with industry code
d. an engineering specification approved by a state registered professional engineer
or engineering standard - Correct answer-c. standards of an independent testing
organization with industry code
With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear in the vapor
escape guard, it is a defect if ____% of the circumference is missing.
a. 25%
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
,b. 75%
c. 50%
d. 65% - Correct answer-b. 75%
Gasoline thread sealant can be used on all except _____.
a. threaded portion of rotatable adapters
b. p/v valve
c. ball float
d. riser adapter - Correct answer-a. threaded portion of rotatable adapters
when installing copper tubing use all except _____.
a. copper tubing cutter
b. copper bending tool
c. copper flaring tool
d. copper stretching tool - Correct answer-d. copper stretching tool
The Husky P/V valve has a torque range of...
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
, a. 50-75 lbs
b. 20-50 lbs
c. 30-50 lbs
d. 40-50 lbs - Correct answer-b. 20-50 lbs
When installing the hanging hardware together use...
a. pipe dope
b. non-hardening sealant
c. teflon tape
d. oil or grease - Correct answer-d. oil or grease
When installing in the EO VR-101-E you should have on site _____.
a. the executive order
b. Phil-tite installation manual
c. the equipment checklist
©COPYRIGHT 2025, ALL RIGHTS RESERVED 3
Questions and Answers
Under Dispenser Containment is required to be designed and constructed in
accordance with ____.
a. the appropriate Executive Order
b. generally accepted secondary containment practices
c. standards of an independent testing organization with industry code
d. an engineering specification approved by a state registered professional engineer
or engineering standard - Correct answer-c. standards of an independent testing
organization with industry code
With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear in the vapor
escape guard, it is a defect if ____% of the circumference is missing.
a. 25%
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
,b. 75%
c. 50%
d. 65% - Correct answer-b. 75%
Gasoline thread sealant can be used on all except _____.
a. threaded portion of rotatable adapters
b. p/v valve
c. ball float
d. riser adapter - Correct answer-a. threaded portion of rotatable adapters
when installing copper tubing use all except _____.
a. copper tubing cutter
b. copper bending tool
c. copper flaring tool
d. copper stretching tool - Correct answer-d. copper stretching tool
The Husky P/V valve has a torque range of...
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
, a. 50-75 lbs
b. 20-50 lbs
c. 30-50 lbs
d. 40-50 lbs - Correct answer-b. 20-50 lbs
When installing the hanging hardware together use...
a. pipe dope
b. non-hardening sealant
c. teflon tape
d. oil or grease - Correct answer-d. oil or grease
When installing in the EO VR-101-E you should have on site _____.
a. the executive order
b. Phil-tite installation manual
c. the equipment checklist
©COPYRIGHT 2025, ALL RIGHTS RESERVED 3
