1|Page
ABO Advanced Actual Exam Test Bank 2 Newest 2025-2026
/ ABO Advanced Exam Preparation /ABO Advanced
Practice Exam With 500 Complete Questions And Correct
Detailed Answers |Already Graded A+|Brand New Version!!
Which layer of the cornea contains three types of cells and what are
they? - ANSWER-Epithelium
Cells:
Squamous
wing
basal
The engraved markings on a progressive lens are located ____mm from
the lens center - ANSWER-17
A consumer complains that his old glasses give him better visual acuity
than his new glasses (same RX). what should the optician do? -
ANSWER-Check the vertex distance and base curve
If the right temple is angled up, this adjustment will: - ANSWER-Lower
the right side of the front
,2|Page
________ is vertical misalignment caused by a twisted bridge in which
the top of one lens eye wire is tilted out and the other is tilted in. -
ANSWER-x-ing
When checking the near power of a front surface progressive lens the
_____ side of the lens should face the operator. - ANSWER-Concave
When checking the distance power of a progressive lens the ______ side
of the lens should face the operator. - ANSWER-Convex
When fitting a frame to a progressive lens patient ____ degrees of
pantoscopic tilt is recommended. - ANSWER-12-15
The amount of prism used for prism thinning a progressive lens should
equal ____ of the add power. - ANSWER-2/3
If the right temple is angled in, this adjustment will: - ANSWER-Push
the right side of the front away from the right eye.
If pads dig into the sides of the nose, all of the following remedies could
be used except: - ANSWER-DO NOT Toughen skin with acetone
,3|Page
Which of the following materials is the most impact resistants? -
ANSWER-Polycarbonate
All of the following are important questions to ask when a patient
returns with problems except: - ANSWER-could you have waited until
your next appointment.
When new progressive lenses are delivered, the fitting cross should be
positioned directly in front of the pupil. TRUE or FALSE - ANSWER-
True
Prism is verified at the same location on a progressive addition lens as
the distance RX. TRUE or FALSE - ANSWER-False
Visible PALs lens markings on finished eyewear should always be
removed prior to dispensing to the patient. TRUE or FALSE -
ANSWER-False
Frame adjustments should be made prior to measuring the fitting cross
height for a progressive lens. TRUE or FALSE - ANSWER-True
If the patient must lower their head to see clearly in the distance, the
progressive lenses are positioned too high. TRUE or FALSE -
ANSWER-True
, 4|Page
If a patient must move the reading material to the side to see clearly, the
pupillary measurements may be off. TRUE or FALSE - ANSWER-True
Each letter on an acuity chart subtends a _____ angle to the eye at a
given distance. - ANSWER-Five minute
Birefringence is also referred to as _______ and can result in distortion
reducing the visual performance to the wearer? - ANSWER-Double
refraction
According to ANSI standards, the tolerance for the refractive power of
the sphere in prescription eyewear is: - ANSWER-0.00 -6.50D +_ 0.13D
Above 6.50D +2%
Of the two telescope types used today, which type is a refracting
telescope?
Refracting- Glass lens as objective
concave- eye pieve
convex- objective lens - ANSWER-Galilean
Of the two telescope types used today, which type is a reflecting
telescope?
Reflecting- uses mirror- image is upside down - ANSWER-Keplerian
ABO Advanced Actual Exam Test Bank 2 Newest 2025-2026
/ ABO Advanced Exam Preparation /ABO Advanced
Practice Exam With 500 Complete Questions And Correct
Detailed Answers |Already Graded A+|Brand New Version!!
Which layer of the cornea contains three types of cells and what are
they? - ANSWER-Epithelium
Cells:
Squamous
wing
basal
The engraved markings on a progressive lens are located ____mm from
the lens center - ANSWER-17
A consumer complains that his old glasses give him better visual acuity
than his new glasses (same RX). what should the optician do? -
ANSWER-Check the vertex distance and base curve
If the right temple is angled up, this adjustment will: - ANSWER-Lower
the right side of the front
,2|Page
________ is vertical misalignment caused by a twisted bridge in which
the top of one lens eye wire is tilted out and the other is tilted in. -
ANSWER-x-ing
When checking the near power of a front surface progressive lens the
_____ side of the lens should face the operator. - ANSWER-Concave
When checking the distance power of a progressive lens the ______ side
of the lens should face the operator. - ANSWER-Convex
When fitting a frame to a progressive lens patient ____ degrees of
pantoscopic tilt is recommended. - ANSWER-12-15
The amount of prism used for prism thinning a progressive lens should
equal ____ of the add power. - ANSWER-2/3
If the right temple is angled in, this adjustment will: - ANSWER-Push
the right side of the front away from the right eye.
If pads dig into the sides of the nose, all of the following remedies could
be used except: - ANSWER-DO NOT Toughen skin with acetone
,3|Page
Which of the following materials is the most impact resistants? -
ANSWER-Polycarbonate
All of the following are important questions to ask when a patient
returns with problems except: - ANSWER-could you have waited until
your next appointment.
When new progressive lenses are delivered, the fitting cross should be
positioned directly in front of the pupil. TRUE or FALSE - ANSWER-
True
Prism is verified at the same location on a progressive addition lens as
the distance RX. TRUE or FALSE - ANSWER-False
Visible PALs lens markings on finished eyewear should always be
removed prior to dispensing to the patient. TRUE or FALSE -
ANSWER-False
Frame adjustments should be made prior to measuring the fitting cross
height for a progressive lens. TRUE or FALSE - ANSWER-True
If the patient must lower their head to see clearly in the distance, the
progressive lenses are positioned too high. TRUE or FALSE -
ANSWER-True
, 4|Page
If a patient must move the reading material to the side to see clearly, the
pupillary measurements may be off. TRUE or FALSE - ANSWER-True
Each letter on an acuity chart subtends a _____ angle to the eye at a
given distance. - ANSWER-Five minute
Birefringence is also referred to as _______ and can result in distortion
reducing the visual performance to the wearer? - ANSWER-Double
refraction
According to ANSI standards, the tolerance for the refractive power of
the sphere in prescription eyewear is: - ANSWER-0.00 -6.50D +_ 0.13D
Above 6.50D +2%
Of the two telescope types used today, which type is a refracting
telescope?
Refracting- Glass lens as objective
concave- eye pieve
convex- objective lens - ANSWER-Galilean
Of the two telescope types used today, which type is a reflecting
telescope?
Reflecting- uses mirror- image is upside down - ANSWER-Keplerian
