CORRECT WELL DETAILED ANSWERS|LATEST
UPDATE!!!2025/2026|GUARANTEED
The pump must be installed in a separate chamber, a check valve should be in line if the
disposal area is upgrade, a high water alarm must be provided - ANSWER If effluent is
to be pumped
Septic tank - ANSWER The most commonly used primary treatment component in
Texas for on-site systems is the
City sewage treatment plant - ANSWER What produces the highest quality effluent?
Vent the tank to the building plumbing, reduce velocity and disperse blow -
ANSWER The purpose of the inlet baffle or T is to
50 feet and 5 feet respectively - ANSWER The minimum distances a watertight sewage
treatment tank should be from a water-well and a property line are
Of a two or three compartment design - ANSWER Septic tank must be
1,250 gal - ANSWER A septic tank serving a new five-bedroom home with 3,800 sqft
must have a minimum capacity of
1
, Steel reinforced concrete - ANSWER A steel septic tank may be constructed of
300 - ANSWER The expected vol of watewater (Q) is gal/day from an older (pre-1990)
three bedroom mobile home would be
Structurally sound, designed by PE, watertight - ANSWER poured-in-place concrete
septic tanks should be
Tees - ANSWER The standard inlet and outlet devices in a septic tank should be
Vented through the building plumbing - ANSWER properly sealed septic tanks are
Must be at least 30 inches - ANSWER the liquid depth of a septic tank
Must have an access port with a riser - ANSWER a septic tank with 15 inches of cover
May be constructed of cast iron, may be SDR 26 plastic pipe, may be schedule 40 plastic pipe
- ANSWER the line from the building to the treatment tank
Removed in the first compartment - ANSWER most of the setteable solids and scum
that enter a properly designed septic tank will be
Minimum of 1/8 inch per foot fall, a two-way sanitary clean out, minimum diameter of 3 in -
ANSWER the house sewer should have
2
UPDATE!!!2025/2026|GUARANTEED
The pump must be installed in a separate chamber, a check valve should be in line if the
disposal area is upgrade, a high water alarm must be provided - ANSWER If effluent is
to be pumped
Septic tank - ANSWER The most commonly used primary treatment component in
Texas for on-site systems is the
City sewage treatment plant - ANSWER What produces the highest quality effluent?
Vent the tank to the building plumbing, reduce velocity and disperse blow -
ANSWER The purpose of the inlet baffle or T is to
50 feet and 5 feet respectively - ANSWER The minimum distances a watertight sewage
treatment tank should be from a water-well and a property line are
Of a two or three compartment design - ANSWER Septic tank must be
1,250 gal - ANSWER A septic tank serving a new five-bedroom home with 3,800 sqft
must have a minimum capacity of
1
, Steel reinforced concrete - ANSWER A steel septic tank may be constructed of
300 - ANSWER The expected vol of watewater (Q) is gal/day from an older (pre-1990)
three bedroom mobile home would be
Structurally sound, designed by PE, watertight - ANSWER poured-in-place concrete
septic tanks should be
Tees - ANSWER The standard inlet and outlet devices in a septic tank should be
Vented through the building plumbing - ANSWER properly sealed septic tanks are
Must be at least 30 inches - ANSWER the liquid depth of a septic tank
Must have an access port with a riser - ANSWER a septic tank with 15 inches of cover
May be constructed of cast iron, may be SDR 26 plastic pipe, may be schedule 40 plastic pipe
- ANSWER the line from the building to the treatment tank
Removed in the first compartment - ANSWER most of the setteable solids and scum
that enter a properly designed septic tank will be
Minimum of 1/8 inch per foot fall, a two-way sanitary clean out, minimum diameter of 3 in -
ANSWER the house sewer should have
2
