MP100 FINAL EXAM | QUESTIONS AND ANSWERS | VERIFIED
ANSWERS 100% CORRECT | LATEST EXAM UPDATE
A control room is designed and built to be acoustically isolated for____? -
CORRECT ANSWER - critical listening
What do we call the process where all of the individual tracks from a multitrack
recording are combined through the console and adjustments are made to the
level, tone, and spatial positioning of the sources? - CORRECT ANSWER -
Mixing
What is the name of the recorder that is designed to record the stereo mix? -
CORRECT ANSWER - MDR
What is the name of the MDR in studios C and B - CORRECT ANSWER -
Alesis Masterlink
What is the term for a device that will change one form of energy to another
corresponding form of energy? - CORRECT ANSWER - transducer
What are the three MAIN steps to the multi-track recording process? -
CORRECT ANSWER - recording, overdubbing, then mixing
How does the root mean square (RMS) value measure amplitude - CORRECT
ANSWER - it measures the average of peak amplitude.
The warmer the temperature, the ___________________ a sound pressure wave
will travel through the air. - CORRECT ANSWER - faster
, T/F: The velocity of a sound pressure wave increases at a rate of 1.1 feet per
second for each Fahrenheit degree increase in temperature - CORRECT
ANSWER - True
T/F: Reflections can cause phase shift. - CORRECT ANSWER - true
______________ can be due to different distances between two or more
microphones. - CORRECT ANSWER - phase shift
Group Signal on the I/O can be in the___________Path? - CORRECT
ANSWER - Can be in either path or both
How well we hear certain frequencies compared to other frequencies is affected
by our listening level (amplitude). What frequencies are affected most? -
CORRECT ANSWER - low frequencies
What is the average range of human hearing? - CORRECT ANSWER - 20hz-
20kHz
What decibel scale do faders use? - CORRECT ANSWER - logarthimic
The preferred way of getting signal to the MTR is the _________ because it is a
shorter, cleaner signal. - CORRECT ANSWER - Direct Out
What console inputs are line level inputs? - CORRECT ANSWER - line level
inputs, and tape or monitor inputs
What is the fader function that sends to the multitrack recorder? - CORRECT
ANSWER - Source Fader
ANSWERS 100% CORRECT | LATEST EXAM UPDATE
A control room is designed and built to be acoustically isolated for____? -
CORRECT ANSWER - critical listening
What do we call the process where all of the individual tracks from a multitrack
recording are combined through the console and adjustments are made to the
level, tone, and spatial positioning of the sources? - CORRECT ANSWER -
Mixing
What is the name of the recorder that is designed to record the stereo mix? -
CORRECT ANSWER - MDR
What is the name of the MDR in studios C and B - CORRECT ANSWER -
Alesis Masterlink
What is the term for a device that will change one form of energy to another
corresponding form of energy? - CORRECT ANSWER - transducer
What are the three MAIN steps to the multi-track recording process? -
CORRECT ANSWER - recording, overdubbing, then mixing
How does the root mean square (RMS) value measure amplitude - CORRECT
ANSWER - it measures the average of peak amplitude.
The warmer the temperature, the ___________________ a sound pressure wave
will travel through the air. - CORRECT ANSWER - faster
, T/F: The velocity of a sound pressure wave increases at a rate of 1.1 feet per
second for each Fahrenheit degree increase in temperature - CORRECT
ANSWER - True
T/F: Reflections can cause phase shift. - CORRECT ANSWER - true
______________ can be due to different distances between two or more
microphones. - CORRECT ANSWER - phase shift
Group Signal on the I/O can be in the___________Path? - CORRECT
ANSWER - Can be in either path or both
How well we hear certain frequencies compared to other frequencies is affected
by our listening level (amplitude). What frequencies are affected most? -
CORRECT ANSWER - low frequencies
What is the average range of human hearing? - CORRECT ANSWER - 20hz-
20kHz
What decibel scale do faders use? - CORRECT ANSWER - logarthimic
The preferred way of getting signal to the MTR is the _________ because it is a
shorter, cleaner signal. - CORRECT ANSWER - Direct Out
What console inputs are line level inputs? - CORRECT ANSWER - line level
inputs, and tape or monitor inputs
What is the fader function that sends to the multitrack recorder? - CORRECT
ANSWER - Source Fader
