CYCLE 1 MP-100 TEST LATEST QUESTIONS
& ANS..
1 of
15
Definition
What is the first console method question?
What is the general answer?
Give this one a try later!
What inputs does the console
Analog VU meters will show RMS
offer?
value. Analog meters will show
Mic input, Line input, tape or nominal level at 0dB.
monitor input, Group signal on
Digital Meters WILL clip at 0dB.
the I/O (bus input)
, How do I direct the output of the
faders to the MTB or the SB? What inputs are the MTR outputs
Output assignment switches, output connected to?
reversing Line inputs, tape or monitor inputs
Don't know?
2 of 15
Definition
A Half Normal breaks the normal where?
Give this one a try later!
At the power supply. Power is Half
Normalled In the middle. Signal is interrupted
At the input. Inserts are Half At the output. Outputs are Half
Normalled Normalled
Don't know?
3 of 15
Definition
What is Group Signal on the I/O?
Give this one a try later!
& ANS..
1 of
15
Definition
What is the first console method question?
What is the general answer?
Give this one a try later!
What inputs does the console
Analog VU meters will show RMS
offer?
value. Analog meters will show
Mic input, Line input, tape or nominal level at 0dB.
monitor input, Group signal on
Digital Meters WILL clip at 0dB.
the I/O (bus input)
, How do I direct the output of the
faders to the MTB or the SB? What inputs are the MTR outputs
Output assignment switches, output connected to?
reversing Line inputs, tape or monitor inputs
Don't know?
2 of 15
Definition
A Half Normal breaks the normal where?
Give this one a try later!
At the power supply. Power is Half
Normalled In the middle. Signal is interrupted
At the input. Inserts are Half At the output. Outputs are Half
Normalled Normalled
Don't know?
3 of 15
Definition
What is Group Signal on the I/O?
Give this one a try later!