Boiler State Test Review Wa. RTC.
Questions with 100% Correct Answers
the most important boiler fitting on a boiler is the Correct Answer: safety valve
A ________ blow-down is performed to remove sludge from the boiler. Correct
Answer: Bottom
A boiler operated at pressure not exceeding 15 psi for steam is classifies in the
Tacoma city Correct Answer: low-pressure steam heating boiler
The water column for a boiler must be located: Correct Answer: at the normal
operating water level
A boiler that is priming has: Correct Answer: Water carried over with the steam
According to Seattle steam code, whenever a boiler that is required to be
tended by a certified boiler operator with a particular class of certificate, is
being operated by a person who does not have a boiler operating certificate
or the boiler operate certificate is limited to not include the size of boiler being
operated, the boiler operator, or the person tending the boiler, shall be issued
Correct Answer: Not to exceed $500 per day for each violation from the date
the violation occurs or begins until compliance is achieved.
A steam boiler safety valves must be sized to prevent steam pressure from
exceeding Mawp Correct Answer: 6%
CO in flue gas of a boiler is an indication of Correct Answer: Incomplete
combustion.
, Fuel oil grade commonly use in a boiler are designate by No.________ for the
lightest grade of fuel oil through No.________ for the heaviest grade of fuel oil.
Correct Answer: 2;6
When starting-up a reciprocating pump Correct Answer: the discharge valve
should be open
Priming a water pump means: Correct Answer: Filling the pump casing and
suction line with water
A sliding vane pump is termed: Correct Answer: A Rotary pump
Greases are commonly a mixture of mineral oil and: Correct Answer: Graphite
The pour point of an oil is: Correct Answer: The highest temperature at which the
oil will flow
A basic law of electricity is, unlike charges attract each other and like charges:
Correct Answer: Repel each other
The bourdon tube is often shaped in the form of a "C", having an arc span of
about: Correct Answer: 270 degrees
The low water cut off can be tested by: Correct Answer: Shutting off the feed
water
A hot water boiler is protected from over pressure mean of: Correct Answer: A
safety pop Valve
Your boiler is operated with automatic water feeders. If the boiler suddenly
requires an increase in water treatment, what should you look for? Correct
Answer: Check for a loss of water
Questions with 100% Correct Answers
the most important boiler fitting on a boiler is the Correct Answer: safety valve
A ________ blow-down is performed to remove sludge from the boiler. Correct
Answer: Bottom
A boiler operated at pressure not exceeding 15 psi for steam is classifies in the
Tacoma city Correct Answer: low-pressure steam heating boiler
The water column for a boiler must be located: Correct Answer: at the normal
operating water level
A boiler that is priming has: Correct Answer: Water carried over with the steam
According to Seattle steam code, whenever a boiler that is required to be
tended by a certified boiler operator with a particular class of certificate, is
being operated by a person who does not have a boiler operating certificate
or the boiler operate certificate is limited to not include the size of boiler being
operated, the boiler operator, or the person tending the boiler, shall be issued
Correct Answer: Not to exceed $500 per day for each violation from the date
the violation occurs or begins until compliance is achieved.
A steam boiler safety valves must be sized to prevent steam pressure from
exceeding Mawp Correct Answer: 6%
CO in flue gas of a boiler is an indication of Correct Answer: Incomplete
combustion.
, Fuel oil grade commonly use in a boiler are designate by No.________ for the
lightest grade of fuel oil through No.________ for the heaviest grade of fuel oil.
Correct Answer: 2;6
When starting-up a reciprocating pump Correct Answer: the discharge valve
should be open
Priming a water pump means: Correct Answer: Filling the pump casing and
suction line with water
A sliding vane pump is termed: Correct Answer: A Rotary pump
Greases are commonly a mixture of mineral oil and: Correct Answer: Graphite
The pour point of an oil is: Correct Answer: The highest temperature at which the
oil will flow
A basic law of electricity is, unlike charges attract each other and like charges:
Correct Answer: Repel each other
The bourdon tube is often shaped in the form of a "C", having an arc span of
about: Correct Answer: 270 degrees
The low water cut off can be tested by: Correct Answer: Shutting off the feed
water
A hot water boiler is protected from over pressure mean of: Correct Answer: A
safety pop Valve
Your boiler is operated with automatic water feeders. If the boiler suddenly
requires an increase in water treatment, what should you look for? Correct
Answer: Check for a loss of water
