PKSC 4300 Exam 1 Joey's Version
1. starts and ends with web: flexible packaging printing press
2. starts with web: form fill seal pouch machine
3. ends with web: blown film line
4. no web involved: sheet fed press
5. no web involved: corrugated box erector
6. ends with web: cast film line
7. starts and ends with web: flexible packaging laminator
8. zero, extreme, center, median, cancelling: what is true of measures of variability?
- average deviation is often in symmetric distributions
- range only considers the (highest and lowest) values
- the mean (average) is typically the point of normal distributions
- the is the center of all the values
1/8
,- standard deviation is a method to keep deviations from out
9. static, kinetic: for an intermittent motion packaging machine:
and coeflcient of friction are important.
10. secondary quality characteristic: into which category of properties would our text book place COF?
11. inertia: what concept from physics must be overcome that results in the higher value of the static COF
12. incipient fire: initial or beginning stage fire that can be handled safely with a portable fire extinguisher. there
is no need for PPE
13. pull, aim, squeeze, sweep: PASS Method:
the pin
at base of fire
the handle
side to side
14. sequential, independent, time, fixed: Line chart
x axis - listing of data; often a measure of , only a distance
between x axis units
15. dependent: Line chart
2/8
, y axis - listing of data corresponding to x data
16. numerically, independent, dependent: Scatter plot
x axis - placed data
y axis - listing of data corresponding to x data
3/8
1. starts and ends with web: flexible packaging printing press
2. starts with web: form fill seal pouch machine
3. ends with web: blown film line
4. no web involved: sheet fed press
5. no web involved: corrugated box erector
6. ends with web: cast film line
7. starts and ends with web: flexible packaging laminator
8. zero, extreme, center, median, cancelling: what is true of measures of variability?
- average deviation is often in symmetric distributions
- range only considers the (highest and lowest) values
- the mean (average) is typically the point of normal distributions
- the is the center of all the values
1/8
,- standard deviation is a method to keep deviations from out
9. static, kinetic: for an intermittent motion packaging machine:
and coeflcient of friction are important.
10. secondary quality characteristic: into which category of properties would our text book place COF?
11. inertia: what concept from physics must be overcome that results in the higher value of the static COF
12. incipient fire: initial or beginning stage fire that can be handled safely with a portable fire extinguisher. there
is no need for PPE
13. pull, aim, squeeze, sweep: PASS Method:
the pin
at base of fire
the handle
side to side
14. sequential, independent, time, fixed: Line chart
x axis - listing of data; often a measure of , only a distance
between x axis units
15. dependent: Line chart
2/8
, y axis - listing of data corresponding to x data
16. numerically, independent, dependent: Scatter plot
x axis - placed data
y axis - listing of data corresponding to x data
3/8
