Georgia (GA) Land
Surveyor License Exam
2025/2026 – Latest
Questions with Verified
Solutions
Question 1
Which of the following Georgia statutes primarily governs the recording
requirements for plats?
A. OCGA 43-15’s licensing provisions
B. OCGA 15-6-67 (Plat Act)
C. OCGA 44-3-70 (Condominium Act)
D. OCGA 44-1-15 (Monumentation Act)
Answer: B. OCGA 15-6-67
Rationale: The Georgia Plat Act (OCGA 15-6-67) sets out the requirements
for plats and subdivisions in Georgia.
Question 2
Under Georgia minimum technical standards, when measurement
precision is required, which of the following best describes the standard?
,A. ± 0.5 feet for all surveys
B. Accuracy consistent with professional standard of care, documented
on field notes and map
C. ± 0.1 feet only on city lots
D. Tolerance is not required to be documented
Answer: B. Accuracy consistent with professional standard of care,
documented on field notes and map
Rationale: Georgia rules require that surveys be performed to recognized
professional standards and precision levels, and this must be
documented—simply quoting a tolerance without documentation is
insufficient.
Question 3
Which of the following is a permitted surveying practice in Georgia
regarding boundary overlaps and gores?
A. They are always permissible if older survey exists
B. The surveyor must identify and resolve all gores and overlaps as part
of boundary analysis per Rule 180-7-.02
C. The surveyor ignores them unless a dispute arises
D. Gores are acceptable if less than 1 ft²
Answer: B. The surveyor must identify and resolve all gores and overlaps
as part of boundary analysis per Rule 180-7-.02
Rationale: One of the important Georgia surveying rules is that overlaps
and gores must be analyzed and addressed by the surveyor in boundary
retracement.
Question 4
An applicant for PLS licensure in Georgia has a bachelor’s degree but
only three years of experience and has passed all required exams. Under
the SB 195 (2024) law, is this sufficient experience?
A. Yes, three years is the requirement for bachelor’s degree holders
B. No, bachelor’s degree holders need five years
C. Yes, but only if tied to a 2-year apprenticeship
,D. No, you must have eight years for bachelor’s degree
Answer: A. Yes, three years is the requirement for bachelor’s degree
holders
Rationale: The new law sets three years of acceptable land surveying
experience for applicants with a bachelor’s degree.
Question 5
Which document must a Georgia PLS include on a boundary survey plat
to comply with Georgia rules?
A. The surveyor’s college transcript
B. A statement of certification on the plat signed and sealed by the
surveyor in responsible charge
C. A summary of the surveyor’s experience
D. A copy of the client’s deed
Answer: B. A statement of certification on the plat signed and sealed by
the surveyor in responsible charge
Rationale: Georgia rules require the responsible PLS to sign and seal the
survey plat along with a certification statement that the plat meets
minimum technical standards and reflects the boundary retracement, etc.
Part 1: Fundamentals of Surveying (FS) Practice Questions (2025–
2026)
Q1.
A line measures 98.46 ft on a 100-ft steel tape that is 0.02 ft too long.
What is the corrected length?
A. 98.44 ft
B. 98.48 ft
, C. 98.46 ft
D. 98.50 ft
Answer: A. 98.44 ft
Rationale:
Correction factor = (True length / Nominal length) = 100. =
1.0002
Corrected distance = 98..0002 = 98.44 ft
Q2.
What is the main purpose of leveling in surveying?
A. Measure horizontal distances
B. Determine relative elevations
C. Set boundaries
D. Create control networks
Answer: B. Determine relative elevations
Rationale:
Leveling determines differences in elevation between points, essential for
topographic mapping and construction.
Q3.
A 5% grade means the ground rises:
A. 5 ft for every 100 ft horizontal
B. 5 ft for every 50 ft horizontal
C. 5 in for every 100 ft horizontal
D. 5 in for every 50 ft horizontal
Surveyor License Exam
2025/2026 – Latest
Questions with Verified
Solutions
Question 1
Which of the following Georgia statutes primarily governs the recording
requirements for plats?
A. OCGA 43-15’s licensing provisions
B. OCGA 15-6-67 (Plat Act)
C. OCGA 44-3-70 (Condominium Act)
D. OCGA 44-1-15 (Monumentation Act)
Answer: B. OCGA 15-6-67
Rationale: The Georgia Plat Act (OCGA 15-6-67) sets out the requirements
for plats and subdivisions in Georgia.
Question 2
Under Georgia minimum technical standards, when measurement
precision is required, which of the following best describes the standard?
,A. ± 0.5 feet for all surveys
B. Accuracy consistent with professional standard of care, documented
on field notes and map
C. ± 0.1 feet only on city lots
D. Tolerance is not required to be documented
Answer: B. Accuracy consistent with professional standard of care,
documented on field notes and map
Rationale: Georgia rules require that surveys be performed to recognized
professional standards and precision levels, and this must be
documented—simply quoting a tolerance without documentation is
insufficient.
Question 3
Which of the following is a permitted surveying practice in Georgia
regarding boundary overlaps and gores?
A. They are always permissible if older survey exists
B. The surveyor must identify and resolve all gores and overlaps as part
of boundary analysis per Rule 180-7-.02
C. The surveyor ignores them unless a dispute arises
D. Gores are acceptable if less than 1 ft²
Answer: B. The surveyor must identify and resolve all gores and overlaps
as part of boundary analysis per Rule 180-7-.02
Rationale: One of the important Georgia surveying rules is that overlaps
and gores must be analyzed and addressed by the surveyor in boundary
retracement.
Question 4
An applicant for PLS licensure in Georgia has a bachelor’s degree but
only three years of experience and has passed all required exams. Under
the SB 195 (2024) law, is this sufficient experience?
A. Yes, three years is the requirement for bachelor’s degree holders
B. No, bachelor’s degree holders need five years
C. Yes, but only if tied to a 2-year apprenticeship
,D. No, you must have eight years for bachelor’s degree
Answer: A. Yes, three years is the requirement for bachelor’s degree
holders
Rationale: The new law sets three years of acceptable land surveying
experience for applicants with a bachelor’s degree.
Question 5
Which document must a Georgia PLS include on a boundary survey plat
to comply with Georgia rules?
A. The surveyor’s college transcript
B. A statement of certification on the plat signed and sealed by the
surveyor in responsible charge
C. A summary of the surveyor’s experience
D. A copy of the client’s deed
Answer: B. A statement of certification on the plat signed and sealed by
the surveyor in responsible charge
Rationale: Georgia rules require the responsible PLS to sign and seal the
survey plat along with a certification statement that the plat meets
minimum technical standards and reflects the boundary retracement, etc.
Part 1: Fundamentals of Surveying (FS) Practice Questions (2025–
2026)
Q1.
A line measures 98.46 ft on a 100-ft steel tape that is 0.02 ft too long.
What is the corrected length?
A. 98.44 ft
B. 98.48 ft
, C. 98.46 ft
D. 98.50 ft
Answer: A. 98.44 ft
Rationale:
Correction factor = (True length / Nominal length) = 100. =
1.0002
Corrected distance = 98..0002 = 98.44 ft
Q2.
What is the main purpose of leveling in surveying?
A. Measure horizontal distances
B. Determine relative elevations
C. Set boundaries
D. Create control networks
Answer: B. Determine relative elevations
Rationale:
Leveling determines differences in elevation between points, essential for
topographic mapping and construction.
Q3.
A 5% grade means the ground rises:
A. 5 ft for every 100 ft horizontal
B. 5 ft for every 50 ft horizontal
C. 5 in for every 100 ft horizontal
D. 5 in for every 50 ft horizontal
