Electrical JATC code definitions test Questions Complete With Correct Answers || 100% pass

Electrical JATC code definitions test Questions Complete With Correct Answers .Ampacity - Answer-The maximum current in amprees that a conductor can carry continuously under the conditions of use without exceeding its temperature rating .Appliance - Answer-Utilization equipment, generally other than industrial, that is normally built in standardize sizes or types and it's installed or connected as a unit to perform one or more functions such as clothes washing, air-conditioning, food mixing, deep frying and so forth .Appliance branch circuit - Answer-A branch circuit that supplies energy to one or more outlets to which appliances are to be connected and that has no permanently connected luminaires that are not a part of an appliance .Approved - Answer-Acceptable to the authority having jurisdiction .Arc-fault circuit interrupter - Answer-A device intended to provide protection from the effects of arc fault by recognizing characteristics unique to arcing and by functioning to De-energize the circuit when the fault is detected .Authority having jurisdiction (AHJ) - Answer-An organization, office, or individual responsible for enforcing the requirements of the code or standard, or for approving equipment, materials, and installation or procedure .Bonded (bonding) - Answer-Connected to establish electrical continuity and conductivity .Bonding jumper, equipment - Answer-The connection between two or more portions of equipment grounding conductor .Bonding jumper, main - Answer-The connection between the grounded circuit conductor and thr equipment grounding conductor At the service .Bonding jumper, system - Answer-The connection between the grounded circuit conductor and the supply side bonding jumper or the equipment grounding conductor or both at a separately derived system .Branch circuit - Answer-The circuit conductors between the final overcurrent device protecting the circuit and the outlet .Building - Answer-A structure that stands alone or that is cut off from ajoining structures by firewalls with all openings therein protected by approved fire doors .Cabinet - Answer-And enclosure that is designed for either surface mount or flush mounting and is provided with a frame mat or trim and which a swingingdoor or doors are or can be hung .Circuit breaker - Answer-Hey device designed to open and close a circuit by non-automatic means and open the circuit automatically on a predetermined overcurrent without damage to itself when properly applied within its rating .Concealed - Answer-Rendered inaccessible by the structure or the finish of the building .Continuous duty - Answer-Operation at a substantially constant load for ideffentially long time .Continuous load - Answer-A load were maximum current is expected to last 3 hours or more .Controller - Answer-A device or group of devices that serves to govern, in some pre-determined manner, the electric power delivered to the apparatus to which it is connected .Covered conductor - Answer-A conductor encased within material of composition .Cutout box - Answer-And enclosure designed for surface mounting that has swinging doors or covers secured directly to and telescoping with the walls of the enclosure .Damp location - Answer-Locations protected from weather and not subject to saturation with water or other liquids but subject to moderate degrees of moisture .Dead front - Answer-Without live parts exposed to a person on the operating side of the equipment .Device - Answer-A unit of an electrical system other than a conductor that carries or controls electrical energy as its primary function .Disconnecting means - Answer-Device or group of devices or other means by which the conductors of a circuit can be disconnected from their source of supply .Dry location - Answer-They location not normally subject to dampness or wetness a location classified as dry maybe temporarily subject to dampness or wetness as in the case of a building under construction