New York Network Support Engineer Exam – Practice Test
1. Which layer of the OSI model is responsible for establishing,
managing, and terminating sessions between applications?
A. Network layer
B. Session layer
C. Transport layer
D. Data link layer
The session layer handles dialog control and synchronization
between communicating systems.
2. What is the default subnet mask for a Class B IP address?
A. 255.255.255.0
B. 255.255.0.0
C. 255.0.0.0
D. 255.255.255.255
Class B IP addresses use a 16-bit network prefix, which
corresponds to 255.255.0.0.
3. Which command can you use to test the path packets take to a
destination host?
A. ping
B. ipconfig
C. traceroute (tracert on Windows)
D. nslookup
Traceroute (or tracert) tracks the route packets take across a
network and identifies each hop.
4. Which protocol is used to assign IP addresses automatically to
devices on a network?
, A. DNS
B. ARP
C. DHCP
D. ICMP
DHCP dynamically assigns IP addresses and configuration
parameters to hosts.
5. What device operates at Layer 2 of the OSI model and filters traffic
using MAC addresses?
A. Router
B. Switch
C. Hub
D. Gateway
Switches use MAC addresses to forward data frames within a local
network.
6. Which cable type is most resistant to electromagnetic interference
(EMI)?
A. UTP
B. Coaxial
C. Fiber-optic
D. STP
Fiber-optic cables use light signals, which are immune to EMI.
7. What is the primary purpose of a default gateway?
A. To store DNS records
B. To route traffic from a local network to other networks
C. To assign IP addresses
D. To manage VLANs
, The default gateway forwards packets to destinations outside the
local subnet.
8. Which of the following is a valid private IP address range?
A. 12.0.0.0/8
B. 192.168.0.0/16
C. 223.255.255.0/24
D. 8.8.8.0/24
Private IP addresses include 192.168.0.0/16, used within LANs.
9. What type of DNS record maps a hostname to an IP address?
A. CNAME
B. MX
C. A record
D. PTR
An A record maps domain names to IPv4 addresses.
10. Which port does HTTPS use by default?
A. 20
B. 21
C. 443
D. 80
HTTPS operates on TCP port 443 for secure communication.
11. Which tool is used to identify open ports on a network host?
A. Wireshark
B. Ping
C. Nmap
D. Netstat
1. Which layer of the OSI model is responsible for establishing,
managing, and terminating sessions between applications?
A. Network layer
B. Session layer
C. Transport layer
D. Data link layer
The session layer handles dialog control and synchronization
between communicating systems.
2. What is the default subnet mask for a Class B IP address?
A. 255.255.255.0
B. 255.255.0.0
C. 255.0.0.0
D. 255.255.255.255
Class B IP addresses use a 16-bit network prefix, which
corresponds to 255.255.0.0.
3. Which command can you use to test the path packets take to a
destination host?
A. ping
B. ipconfig
C. traceroute (tracert on Windows)
D. nslookup
Traceroute (or tracert) tracks the route packets take across a
network and identifies each hop.
4. Which protocol is used to assign IP addresses automatically to
devices on a network?
, A. DNS
B. ARP
C. DHCP
D. ICMP
DHCP dynamically assigns IP addresses and configuration
parameters to hosts.
5. What device operates at Layer 2 of the OSI model and filters traffic
using MAC addresses?
A. Router
B. Switch
C. Hub
D. Gateway
Switches use MAC addresses to forward data frames within a local
network.
6. Which cable type is most resistant to electromagnetic interference
(EMI)?
A. UTP
B. Coaxial
C. Fiber-optic
D. STP
Fiber-optic cables use light signals, which are immune to EMI.
7. What is the primary purpose of a default gateway?
A. To store DNS records
B. To route traffic from a local network to other networks
C. To assign IP addresses
D. To manage VLANs
, The default gateway forwards packets to destinations outside the
local subnet.
8. Which of the following is a valid private IP address range?
A. 12.0.0.0/8
B. 192.168.0.0/16
C. 223.255.255.0/24
D. 8.8.8.0/24
Private IP addresses include 192.168.0.0/16, used within LANs.
9. What type of DNS record maps a hostname to an IP address?
A. CNAME
B. MX
C. A record
D. PTR
An A record maps domain names to IPv4 addresses.
10. Which port does HTTPS use by default?
A. 20
B. 21
C. 443
D. 80
HTTPS operates on TCP port 443 for secure communication.
11. Which tool is used to identify open ports on a network host?
A. Wireshark
B. Ping
C. Nmap
D. Netstat