AFAB 110 FINAL PAPER QUESTIONS AND SOLUTIONS
RATED A+
✔✔The type of section view wherein the cutting-plane line has bends to accommodate
several features that are not aligned is a(n) ________ section. - ✔✔Offset
✔✔Cylindrical object with an odd number of features, such as pokes or holes on a bolt
circle, could better be described with a(n) ___________ section. - ✔✔Aligned
✔✔The broken-out section requires another type of line from the alphabet of lines to
help show where the removed portion was broken off in a "jagged" sort of way. This is
the _____________ line. - ✔✔Short break
✔✔When a(n) _____________ section is created, it can be overlaid on the view or short
break lines can be used on each side of the view to separate it from the other visible
lines. - ✔✔Revolved
✔✔Type of section wherein the section view is probably located out of projection with
the other regular or auxiliary views is a(n) ___________ section. - ✔✔Removed
✔✔There is a conventional practice that allows the drafter to leave a feature unhatched,
even though the cutting-plane line passes through it. Which of the following is not
relevant to this conventional practice? - ✔✔Hole
✔✔If there is a large area that needs to receive section lines, the _________ section
allows for the section lines to only be applied around the perimeter. - ✔✔Outline
✔✔In assembly drawings, there may be some parts that do not receive section lines,
but rather the area cut by the cutting-plane line is filled-in solid. Which of the following is
not relevant to this conventional practice? - ✔✔Springs
✔✔If an inclined surface is perpendicular to the frontal plane, how does it appear in the
front view? - ✔✔As an edge view (line)
✔✔Any auxiliary view projected from the front view could be called a ____________
auxiliary. - ✔✔Depth
✔✔Which of the following statements concerning computer-generated auxiliary views is
true? - ✔✔Auxiliary views are created as easily as principal views
✔✔American threads are specified by the number of threads per inch. If there are 12
threads per inch, then the pitch is ____________. - ✔✔0.083
, ✔✔The term for how far a thread advances when the threaded part is rotated one
complete revolution, including multiple threads, is ____________. - ✔✔Lead
✔✔The term that describes the shape of the ridge (or grooves) that form the threads is
___________. - ✔✔Form
✔✔Which of the following statements is the true rule of thumb drafters use when
selecting the method of representing threads on a print? - ✔✔If the major diameter is
more than 1 on the print, regardless of scale, then show a detailed representation.
✔✔Which of the following Unified screw thread forms is a special series? - ✔✔Constant
pitch
✔✔Which of the following classes of threads is fictitious? - ✔✔Class 4B
✔✔The letter M in a thread note designates a __________ thread - ✔✔Metric
✔✔A _____________ dimension features a numeric value used to describe the
theoretical exact size or location in GD&T. - ✔✔Basic
✔✔Material condition modifiers can be used to indicate that a ___________ tolerance
can be applied. - ✔✔Bonus
✔✔Which of the following symbols is no longer used according to the current standard?
- ✔✔Encircled S (regardless of feature size)
✔✔Specific points, lines, or areas of contact can be specified with ________. -
✔✔Datum targets
✔✔Which of the following GD&T controls is not a form tolerance? - ✔✔Runout
✔✔The condition of a surface having all elements in one plane is _________. -
✔✔Flatness
✔✔The condition of a surface, median plane, or axis existing at a right angle to a datum
plane or axis is known as ______________. - ✔✔Perpendicularity
✔✔A geometric tolerance that can be measured with a dial indicator to determien the
variation of surface points as the part is rotated about a datum axis is __________. -
✔✔Runout
RATED A+
✔✔The type of section view wherein the cutting-plane line has bends to accommodate
several features that are not aligned is a(n) ________ section. - ✔✔Offset
✔✔Cylindrical object with an odd number of features, such as pokes or holes on a bolt
circle, could better be described with a(n) ___________ section. - ✔✔Aligned
✔✔The broken-out section requires another type of line from the alphabet of lines to
help show where the removed portion was broken off in a "jagged" sort of way. This is
the _____________ line. - ✔✔Short break
✔✔When a(n) _____________ section is created, it can be overlaid on the view or short
break lines can be used on each side of the view to separate it from the other visible
lines. - ✔✔Revolved
✔✔Type of section wherein the section view is probably located out of projection with
the other regular or auxiliary views is a(n) ___________ section. - ✔✔Removed
✔✔There is a conventional practice that allows the drafter to leave a feature unhatched,
even though the cutting-plane line passes through it. Which of the following is not
relevant to this conventional practice? - ✔✔Hole
✔✔If there is a large area that needs to receive section lines, the _________ section
allows for the section lines to only be applied around the perimeter. - ✔✔Outline
✔✔In assembly drawings, there may be some parts that do not receive section lines,
but rather the area cut by the cutting-plane line is filled-in solid. Which of the following is
not relevant to this conventional practice? - ✔✔Springs
✔✔If an inclined surface is perpendicular to the frontal plane, how does it appear in the
front view? - ✔✔As an edge view (line)
✔✔Any auxiliary view projected from the front view could be called a ____________
auxiliary. - ✔✔Depth
✔✔Which of the following statements concerning computer-generated auxiliary views is
true? - ✔✔Auxiliary views are created as easily as principal views
✔✔American threads are specified by the number of threads per inch. If there are 12
threads per inch, then the pitch is ____________. - ✔✔0.083
, ✔✔The term for how far a thread advances when the threaded part is rotated one
complete revolution, including multiple threads, is ____________. - ✔✔Lead
✔✔The term that describes the shape of the ridge (or grooves) that form the threads is
___________. - ✔✔Form
✔✔Which of the following statements is the true rule of thumb drafters use when
selecting the method of representing threads on a print? - ✔✔If the major diameter is
more than 1 on the print, regardless of scale, then show a detailed representation.
✔✔Which of the following Unified screw thread forms is a special series? - ✔✔Constant
pitch
✔✔Which of the following classes of threads is fictitious? - ✔✔Class 4B
✔✔The letter M in a thread note designates a __________ thread - ✔✔Metric
✔✔A _____________ dimension features a numeric value used to describe the
theoretical exact size or location in GD&T. - ✔✔Basic
✔✔Material condition modifiers can be used to indicate that a ___________ tolerance
can be applied. - ✔✔Bonus
✔✔Which of the following symbols is no longer used according to the current standard?
- ✔✔Encircled S (regardless of feature size)
✔✔Specific points, lines, or areas of contact can be specified with ________. -
✔✔Datum targets
✔✔Which of the following GD&T controls is not a form tolerance? - ✔✔Runout
✔✔The condition of a surface having all elements in one plane is _________. -
✔✔Flatness
✔✔The condition of a surface, median plane, or axis existing at a right angle to a datum
plane or axis is known as ______________. - ✔✔Perpendicularity
✔✔A geometric tolerance that can be measured with a dial indicator to determien the
variation of surface points as the part is rotated about a datum axis is __________. -
✔✔Runout
