TEXAS SAFETY INSPECTION FINAL EXAM
2024 – QUESTIONS WITH CORRECT
VERIFIED ANSWERS || 100% GUARANTEED
PASS <RECENT VERSION>
Texas Vehicle Safety Inspection Practice Exam – 2024
Instructions: Choose the best answer for each question.
1. What is the primary purpose of the Texas Vehicle Safety Inspection
Program?
A. To generate state revenue
B. To ensure vehicles meet minimum safety standards
C. To check for illegal modifications only
D. To verify a vehicle's emissions compliance
Answer: B. To ensure vehicles meet minimum safety standards
2. Before beginning an inspection, an inspector must verify the vehicle's:
A. Insurance status
B. Registration and VIN
C. Ownership history
D. Fuel efficiency
Answer: B. Registration and VIN
3. A vehicle fails the horn inspection if:
A. It is too loud
B. It is a musical horn
C. It is not audible from a distance of 200 feet
D. It is only a button on the steering wheel
Answer: C. It is not audible from a distance of 200 feet
4. The minimum allowable tread depth for a passenger car tire is:
A. 1/32 of an inch
B. 2/32 of an inch
, C. 3/32 of an inch
D. 4/32 of an inch
Answer: B. 2/32 of an inch
5. When inspecting steering mechanism, which of these is a reason for
rejection?
A. Slight play in the steering wheel
B. A steering wheel cover is installed
C. Excessive looseness in the steering system
D. The horn is not in the center of the wheel
Answer: C. Excessive looseness in the steering system
6. A front windshield may have a crack that is:
A. Longer than 3 inches
B. In the driver's line of vision and longer than 1.5 inches
C. In the windshield wiper area
D. Outside the driver's line of vision and shorter than 3 inches
Answer: D. Outside the driver's line of vision and shorter than 3 inches
7. The parking brake must be capable of holding a vehicle stationary on a
grade of:
A. 10%
B. 15%
C. 20%
D. 25%
Answer: C. 20%
8. A vehicle's service brakes must be capable of stopping from 20 mph in not
more than:
A. 15 feet
B. 25 feet
C. 35 feet
D. 45 feet
Answer: B. 25 feet
9. What is the minimum allowable pad thickness for disc brakes?
A. 1/32 inch
2024 – QUESTIONS WITH CORRECT
VERIFIED ANSWERS || 100% GUARANTEED
PASS <RECENT VERSION>
Texas Vehicle Safety Inspection Practice Exam – 2024
Instructions: Choose the best answer for each question.
1. What is the primary purpose of the Texas Vehicle Safety Inspection
Program?
A. To generate state revenue
B. To ensure vehicles meet minimum safety standards
C. To check for illegal modifications only
D. To verify a vehicle's emissions compliance
Answer: B. To ensure vehicles meet minimum safety standards
2. Before beginning an inspection, an inspector must verify the vehicle's:
A. Insurance status
B. Registration and VIN
C. Ownership history
D. Fuel efficiency
Answer: B. Registration and VIN
3. A vehicle fails the horn inspection if:
A. It is too loud
B. It is a musical horn
C. It is not audible from a distance of 200 feet
D. It is only a button on the steering wheel
Answer: C. It is not audible from a distance of 200 feet
4. The minimum allowable tread depth for a passenger car tire is:
A. 1/32 of an inch
B. 2/32 of an inch
, C. 3/32 of an inch
D. 4/32 of an inch
Answer: B. 2/32 of an inch
5. When inspecting steering mechanism, which of these is a reason for
rejection?
A. Slight play in the steering wheel
B. A steering wheel cover is installed
C. Excessive looseness in the steering system
D. The horn is not in the center of the wheel
Answer: C. Excessive looseness in the steering system
6. A front windshield may have a crack that is:
A. Longer than 3 inches
B. In the driver's line of vision and longer than 1.5 inches
C. In the windshield wiper area
D. Outside the driver's line of vision and shorter than 3 inches
Answer: D. Outside the driver's line of vision and shorter than 3 inches
7. The parking brake must be capable of holding a vehicle stationary on a
grade of:
A. 10%
B. 15%
C. 20%
D. 25%
Answer: C. 20%
8. A vehicle's service brakes must be capable of stopping from 20 mph in not
more than:
A. 15 feet
B. 25 feet
C. 35 feet
D. 45 feet
Answer: B. 25 feet
9. What is the minimum allowable pad thickness for disc brakes?
A. 1/32 inch
