Dante Level 1 Exam Complete Questions With
Reviewed 100% Correct Detailed Answers|
Guaranteed Pass!!
The names of devices and channels in Dante are: - ANSWER-User-definable and
remembered by devices.
The sample rate of an audio system dictates: - ANSWER-The highest audio
frequency that the system can handle
The bit depth of an audio system dictates: - ANSWER-The amplitude resolution of
each sample
What is meant by a "stand alone" Dante network? - ANSWER-One that is not
connected to the internet or to other networks
A ----- network topology is the best practice for dante - ANSWER-Star
Dante use fiber instead of copper cable for Ethernet. - ANSWER-Can
How are devices added to a Dante network? - ANSWER-Devices are automatically
discovered and displayed in Dante Controller
How are devices restored to a Dante network after power cycle? - ANSWER-How
are devices restored to a Dante network after power cycle?
, Dante is an example of - ANSWER-an audio over IP (AoIP) solution
On a Dante network, latency is: - ANSWER-deterministic, set per device
The default Dante latency of 1 millisecond is: - ANSWER-very low and suitable
for the majority of applications
A gigabit connection can handle ----- channels of Dante audio at 48kHz sample
rate and 24-bit depth. - ANSWER-512x512
A connection between Dante audio channels is called: - ANSWER-a subscription
What are the steps to delete a subscription in Dante Controller? - ANSWER--Open
both transmitter and receiver to expose channels
-Click green checkmark at intersection of channels you wish to unsubscribe
-Wait for green checkmark to disappear
How are device names used in Dante? - ANSWER-Subscriptions are made from
name to name
What is a LAN? - ANSWER-A computer network that interconnects computers
using a common range of IP addresses
Do Dante devices require special IP configuration? - ANSWER-No, all commonly
supported IP address methods are supported
Does a Dante network require special configuration for clocking? - ANSWER-No.
A Clock Master is always automatically elected by Dante
Reviewed 100% Correct Detailed Answers|
Guaranteed Pass!!
The names of devices and channels in Dante are: - ANSWER-User-definable and
remembered by devices.
The sample rate of an audio system dictates: - ANSWER-The highest audio
frequency that the system can handle
The bit depth of an audio system dictates: - ANSWER-The amplitude resolution of
each sample
What is meant by a "stand alone" Dante network? - ANSWER-One that is not
connected to the internet or to other networks
A ----- network topology is the best practice for dante - ANSWER-Star
Dante use fiber instead of copper cable for Ethernet. - ANSWER-Can
How are devices added to a Dante network? - ANSWER-Devices are automatically
discovered and displayed in Dante Controller
How are devices restored to a Dante network after power cycle? - ANSWER-How
are devices restored to a Dante network after power cycle?
, Dante is an example of - ANSWER-an audio over IP (AoIP) solution
On a Dante network, latency is: - ANSWER-deterministic, set per device
The default Dante latency of 1 millisecond is: - ANSWER-very low and suitable
for the majority of applications
A gigabit connection can handle ----- channels of Dante audio at 48kHz sample
rate and 24-bit depth. - ANSWER-512x512
A connection between Dante audio channels is called: - ANSWER-a subscription
What are the steps to delete a subscription in Dante Controller? - ANSWER--Open
both transmitter and receiver to expose channels
-Click green checkmark at intersection of channels you wish to unsubscribe
-Wait for green checkmark to disappear
How are device names used in Dante? - ANSWER-Subscriptions are made from
name to name
What is a LAN? - ANSWER-A computer network that interconnects computers
using a common range of IP addresses
Do Dante devices require special IP configuration? - ANSWER-No, all commonly
supported IP address methods are supported
Does a Dante network require special configuration for clocking? - ANSWER-No.
A Clock Master is always automatically elected by Dante
