Saca electrical 201
How is electrical energy calculated? - ANS-P= I x E
If you add a third capacitor in series with two other capacitors, what could take place to overall
capacitance and modern. - ANS-The present day and capacitance would lower
Main line current method in parallel - ANS-1/ 1/R1+1/R2+1/R3
Mainline current - ANS-I= E/R
Ohms regulation - ANS-EIR
Watts law - ANS-PIE
What movement need to be taken while a circuit breaker journeys? - ANS-Off then on
What exchange takes place in a circuit powered by way of a battery whilst a parrallel
department is brought. - ANS-Resistance decreases
What circumstance exist while the ohmeter shows overall circuit resistance reads 0 ohms whilst
all branches are connected and reads 200 ohms when branch R1 is disconnected? -
ANS-There is a quick
What does an electrical schematic not display? - ANS-Physical connections
What electrical circuit splits into two or greater paths after which recombine at one factor. -
ANS-Parallel circuit
What function of a floor circuit creates a safe course for present day? - ANS-Low resistance
direction, connection to earth or floor factor
What is a micro farad to a everyday farad? (µF) - ANS-0.000001 farads
What is indicated when voltage is measured across the contacts of a switch - ANS-Its open
What is commonly no longer measured on a virtual multi meter? - ANS-Frequency
What is the pleasant approach to confirm a piece of equipment is properly grounded? -
ANS-Use of multimeter and check for an open modern-day
How is electrical energy calculated? - ANS-P= I x E
If you add a third capacitor in series with two other capacitors, what could take place to overall
capacitance and modern. - ANS-The present day and capacitance would lower
Main line current method in parallel - ANS-1/ 1/R1+1/R2+1/R3
Mainline current - ANS-I= E/R
Ohms regulation - ANS-EIR
Watts law - ANS-PIE
What movement need to be taken while a circuit breaker journeys? - ANS-Off then on
What exchange takes place in a circuit powered by way of a battery whilst a parrallel
department is brought. - ANS-Resistance decreases
What circumstance exist while the ohmeter shows overall circuit resistance reads 0 ohms whilst
all branches are connected and reads 200 ohms when branch R1 is disconnected? -
ANS-There is a quick
What does an electrical schematic not display? - ANS-Physical connections
What electrical circuit splits into two or greater paths after which recombine at one factor. -
ANS-Parallel circuit
What function of a floor circuit creates a safe course for present day? - ANS-Low resistance
direction, connection to earth or floor factor
What is a micro farad to a everyday farad? (µF) - ANS-0.000001 farads
What is indicated when voltage is measured across the contacts of a switch - ANS-Its open
What is commonly no longer measured on a virtual multi meter? - ANS-Frequency
What is the pleasant approach to confirm a piece of equipment is properly grounded? -
ANS-Use of multimeter and check for an open modern-day
