IICRC WRT Test: Questions & Answers
1. During the inspection process, restorers shall make a reasonable effort
to
(Ans - C. identify and address potential safety hazards
2. A significant amount of water absorption and evaporation load where wet
porous materials represent ~5% to ~40% of combined ceiling, walls, and
flooring surface areas and where low evaporation materials and assemblies
are minimally wet is
(Ans - B. class 2
3. Multiple extraction of salvageable materials, especially porous material
(e.g. Carpet , cushion) often are required to:
(Ans - decrease drying time
4. To enhance drying, restorers should manage both ambient temperature
and
(Ans - surface temperatures of affected materials
5. Water damage restoration services should not begin until after the:
(Ans - restorer has entered into an adequately written contract.
6. Two tools that should be used to properly disengage most stretched-in
carpet
(Ans - Knee kicker and carpet awl
7. When inspecting a water damage structure, restorers should inspect:
(Ans - all potentially affected areas.
8. Buckled or damaged particle board should
(Ans - removed and replaced with new material.
, 9. upon entering a building, professional moisture detection equipment
should be used to evaluate and document:
(Ans - applicable psychrometric conditions and moisture content or level
readings .
10. When wet, a structural material that loses most of its structural integrity,
but regains its strength when dry, is:
(Ans - Concrete
11. Initially, a method of search for abnormal moisture behind ceramic tile
or resilient flooring can be accomplished by
(Ans - using a non-penetrating (non-invasive) moisture meter
12. To minimize damage and reduce drying time, reduce drying time,
restorers should:
(Ans - begin mitigation as soon as safely possible
13. The moisture content of structural materials should be measured with a
(Ans - A. moisture meter
14. When accessible from below, to dry wet wood subflooring under stone
or tile flooring, restorers can use low-humidity air and
(Ans - D. vapor barrier
15. Biocides designed to destroy or eliminate all forms of microbial life and
their spores are
(Ans - D. sterilizers
16. When carpet is wet it can be delaminated by
(Ans - D. improper handling and disengaging
17. To minimize or control aerosolized soils or contaminants during
restoration, restorers can:
(Ans - B. install one or more air filtration devices (AFDs)
1. During the inspection process, restorers shall make a reasonable effort
to
(Ans - C. identify and address potential safety hazards
2. A significant amount of water absorption and evaporation load where wet
porous materials represent ~5% to ~40% of combined ceiling, walls, and
flooring surface areas and where low evaporation materials and assemblies
are minimally wet is
(Ans - B. class 2
3. Multiple extraction of salvageable materials, especially porous material
(e.g. Carpet , cushion) often are required to:
(Ans - decrease drying time
4. To enhance drying, restorers should manage both ambient temperature
and
(Ans - surface temperatures of affected materials
5. Water damage restoration services should not begin until after the:
(Ans - restorer has entered into an adequately written contract.
6. Two tools that should be used to properly disengage most stretched-in
carpet
(Ans - Knee kicker and carpet awl
7. When inspecting a water damage structure, restorers should inspect:
(Ans - all potentially affected areas.
8. Buckled or damaged particle board should
(Ans - removed and replaced with new material.
, 9. upon entering a building, professional moisture detection equipment
should be used to evaluate and document:
(Ans - applicable psychrometric conditions and moisture content or level
readings .
10. When wet, a structural material that loses most of its structural integrity,
but regains its strength when dry, is:
(Ans - Concrete
11. Initially, a method of search for abnormal moisture behind ceramic tile
or resilient flooring can be accomplished by
(Ans - using a non-penetrating (non-invasive) moisture meter
12. To minimize damage and reduce drying time, reduce drying time,
restorers should:
(Ans - begin mitigation as soon as safely possible
13. The moisture content of structural materials should be measured with a
(Ans - A. moisture meter
14. When accessible from below, to dry wet wood subflooring under stone
or tile flooring, restorers can use low-humidity air and
(Ans - D. vapor barrier
15. Biocides designed to destroy or eliminate all forms of microbial life and
their spores are
(Ans - D. sterilizers
16. When carpet is wet it can be delaminated by
(Ans - D. improper handling and disengaging
17. To minimize or control aerosolized soils or contaminants during
restoration, restorers can:
(Ans - B. install one or more air filtration devices (AFDs)
