Phil101 Test 1 UD Rogers ACTUAL Exam LATEST 2025 WITH Questions AND Correct
VERIFIED Answers|A+ GUARANTEED
How is the process of steel corrosion ALWAYS described? -CORRECT ANSWER-
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be
used effectively as galvanic anodes for carbon steel? -CORRECT ANSWER-zinc, aluminum,
magnesium
A decrease in temperature will generally cause the corrosion rate to _____ -CORRECT
ANSWER-decrease
The electrolyte is a medium which carries the following type of current? -CORRECT ANSWER-
Ionic
Corrosion occurring uniformly across a surface is called _____ -CORRECT ANSWER-general
corrosion
When a conflict occurs on a coatings project, as the inspector, the preferred first course of
action is to _____ -CORRECT ANSWER-actively listen and endeavor to understand the
positions of others
A proper coating specification should contain information regarding ____, ____, and ____ -
CORRECT ANSWER-surface preparation standards, safety, and locations to be used
Is it ever okay to accept a gift from a contractor? -CORRECT ANSWER-NO
,What should you do if you find discrepancies between the specification and the coating
manufacturer's technical data sheet? -CORRECT ANSWER-seek written clarification from the
owner's representative
What are the general components of inspection reports? -CORRECT ANSWER-- results of
inspection tests
- location(s) of work
- details of preparation and application
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___
___ ___ ___ -CORRECT ANSWER-- contractor's performance
- inspector's performance
- job progress
- work interruptions
As an inspector headed to the job site for the first time, where would you always find
instruction regarding appropriate types of PPE? -CORRECT ANSWER-Safety Data Sheet (SDS),
previously called MSDS
Materials inventory report should contain which of the following? -CORRECT ANSWER--
quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
The primary function of the coating inspector is _____ -CORRECT ANSWER-specification
compliance
High humidity in the air during coating application can cause _____ -CORRECT ANSWER-
solvent entrapment
, The temperature at which moisture condenses on a surface is called _____ -CORRECT
ANSWER-dew point
Where should the steel surface temperature reading be taken? -CORRECT ANSWER-at the
actual work location
What type of water should be added to a sling psychrometer? -CORRECT ANSWER-distilled
Which type of coating is manufactured with the specific components added to slow down
the activity of the electrochemical cell? -CORRECT ANSWER-inhibitive
Which coating component forms a stable film that retains its characteristic properties? -
CORRECT ANSWER-binder/resin
A barrier coating interrupts the ______ of the electrochemical cell. -CORRECT ANSWER-
electrolyte
List the three mechanisms by which coatings adhere to a substrate -CORRECT ANSWER-1.
Polar
2. Chemical
3. Mechanical
What is the rule for coating work when it comes to Dew Point and Steel Temperature? -
CORRECT ANSWER-Steel Temperature must be 5 degrees less than the Dew Point
What characteristics of solvents influence coatings? -CORRECT ANSWER-- solvency power
- volatility
The contractor's sling psychrometer gives a different reading than your electric hygrometer.
What would you do first as an inspector? -CORRECT ANSWER-verify calibration of both
instruments
VERIFIED Answers|A+ GUARANTEED
How is the process of steel corrosion ALWAYS described? -CORRECT ANSWER-
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be
used effectively as galvanic anodes for carbon steel? -CORRECT ANSWER-zinc, aluminum,
magnesium
A decrease in temperature will generally cause the corrosion rate to _____ -CORRECT
ANSWER-decrease
The electrolyte is a medium which carries the following type of current? -CORRECT ANSWER-
Ionic
Corrosion occurring uniformly across a surface is called _____ -CORRECT ANSWER-general
corrosion
When a conflict occurs on a coatings project, as the inspector, the preferred first course of
action is to _____ -CORRECT ANSWER-actively listen and endeavor to understand the
positions of others
A proper coating specification should contain information regarding ____, ____, and ____ -
CORRECT ANSWER-surface preparation standards, safety, and locations to be used
Is it ever okay to accept a gift from a contractor? -CORRECT ANSWER-NO
,What should you do if you find discrepancies between the specification and the coating
manufacturer's technical data sheet? -CORRECT ANSWER-seek written clarification from the
owner's representative
What are the general components of inspection reports? -CORRECT ANSWER-- results of
inspection tests
- location(s) of work
- details of preparation and application
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___
___ ___ ___ -CORRECT ANSWER-- contractor's performance
- inspector's performance
- job progress
- work interruptions
As an inspector headed to the job site for the first time, where would you always find
instruction regarding appropriate types of PPE? -CORRECT ANSWER-Safety Data Sheet (SDS),
previously called MSDS
Materials inventory report should contain which of the following? -CORRECT ANSWER--
quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
The primary function of the coating inspector is _____ -CORRECT ANSWER-specification
compliance
High humidity in the air during coating application can cause _____ -CORRECT ANSWER-
solvent entrapment
, The temperature at which moisture condenses on a surface is called _____ -CORRECT
ANSWER-dew point
Where should the steel surface temperature reading be taken? -CORRECT ANSWER-at the
actual work location
What type of water should be added to a sling psychrometer? -CORRECT ANSWER-distilled
Which type of coating is manufactured with the specific components added to slow down
the activity of the electrochemical cell? -CORRECT ANSWER-inhibitive
Which coating component forms a stable film that retains its characteristic properties? -
CORRECT ANSWER-binder/resin
A barrier coating interrupts the ______ of the electrochemical cell. -CORRECT ANSWER-
electrolyte
List the three mechanisms by which coatings adhere to a substrate -CORRECT ANSWER-1.
Polar
2. Chemical
3. Mechanical
What is the rule for coating work when it comes to Dew Point and Steel Temperature? -
CORRECT ANSWER-Steel Temperature must be 5 degrees less than the Dew Point
What characteristics of solvents influence coatings? -CORRECT ANSWER-- solvency power
- volatility
The contractor's sling psychrometer gives a different reading than your electric hygrometer.
What would you do first as an inspector? -CORRECT ANSWER-verify calibration of both
instruments
