OSIC Prep Exam Questions with Correct Answers Latest Update

OSIC Prep Exam Questions with Correct Answers Latest Update What is TS 9090.310G and its purpose - Answers Specs created by NAVSEA 04R on requirements for the planning, scheduling, and accomplishing of logistically supported Ship Alts/SC done on USN Ships and AEGIS sites by the Alteration Installation Team(AIT) and provisioned by Quality Management System(QMS). What is NAVSEA 04R? - Answers Modernization Planning and Sustainability Office, they create and revise TS9090-310G, and monitor overall AIT program What is NAVSEAINST 4700.17 and its purpose - Answers They are Trouble Reports(TRs). They are generated from Critiques. They Identify systemic problems and issues that constitute significant lessons learned for other activities. What are Critiques? - Answers Done after a CAR, and are held when a mishap/non-conformance has severe impact. What is NSWCPHDINSTR 9090.3, and what is its purpose? - Answers Dated 03NOV2017. It is the AIT Quality Manual developed by NSWC PHD. It has detailed instructions for Shipboard AITs to ensure requirements are met for install. It includes NSWC PHD's QMS. What is SOP 12933-5 and what is its purpose? - Answers Dated OCT2017, they are the OSIC qualification Standards. They are required training and standards for quality.(do another review in 9090-310) What is a WAF/TUM and what is its purpose? - Answers Work Authorization Form/Tag-out User Manual. Meant to Isolate equipment being worked on from any power. It is part of SI 009-24. Forms must be signed and authorized prior to start or install or any work on ship. coordinate with NSA for local process WAF submittal.(review more in 9090-310) What is Standard Item 009-04? - Answers QMS, ensures product conforms to specific requirements. What is Standard Item 009-24? - Answers Shipboard Authorization, Control, isolation, blanking, tagging and cleanliness e.g. WAF, de-energizing etc. What is Standard Item 009-74? - Answers Occupational, Safety and Health Plan: establish, document, implement and maintain safety plan, includes Fire Safety Plan What is Standard Item 009-75? - Answers Circuit Breaker What is NSWCPHDINST 4855.1 and its purpose? - Answers It is the Quality Management system(QMS). AKA Navy Standard Item 009-04. Identifies requirements to establish, document, implement, and maintain a Quality Management System as a means of insuring product conforms to specific requirements. What is NSWCPHDINST 4855.4and its purpose? - Answers It is the Procedural Deviation Policy, The are the procedure deviating authority.(review more in 9090.3G) What are Standard Items and what s their purpose? - Answers They are requirements which guide accomplishment of industrial work on USN ships. There are about 120 SIs that are updated every year by NAVEA SSRAC(Standard Spec for Ship Repair and Alt Committee) What is a LAR and what is its purpose? - Answers A Liaison Action Record, they are records to process a design change. they are written by an OSIC or AITM and submitted to Planning Yard. They are also recorded in SID redlines. This is done in the industrial phase. What is a CAR and what is its purpose? - Answers It is a Corrective Action Request. They are to record nonconformance and to ensure AIT addresses action. Nonconformities by category A (Minor): small and can usually be fixed within a day or two or on the spot, they are administrative, or related to safety. Doesn't impair performance. B (Major): Could be Repeated A NC, could impair performance, cost life of product or create hazardous/unsafe conditions. and AIT action that results in Trouble Report. C (Critical): when B fails to obtain satisfactory results, Method C letter is issued to QA Officer/Director. D (Critical): If C fails to obtain satisfactory results, method Letter is issued to Contracting Officer(CO) for immediate management action. What is a Fire Protection Plan and what is the purpose of it? - Answers Plan of action in case of a fire, you establish before one before install along with muster location. in case of fire: 1) Spread the word 2) Call quarterdeck 3) Get to safety 4) go to muster location Types of Fire Class A-Trash Class B-Flammable Class C-equipment Class D-metals What is NMP-MOM, and what is its purpose? - Answers Navy Modernization Program-Management Operations Manual. Provides disciplined process to deliver operational and technical modifications to the Fleet in an operationally effective and cost effective way. Appendix H of NMP-MOM contains AIT-TS9090-310 What is an AIT Manager, what is their purpose? - Answers Alteration Installation Team Manager, they ensure funding, scheduling and organizing Install. they follow AMQAP(AIT Manager Quality Assurance Program) What is an AIT Lead, what is their purpose? - Answers Alteration Installation Team Lead, they are the more senior member of the the AIT, they report directly to OSIC about anything pertaining to the install. What is an OSIC, what is their purpose? - Answers On-Site Installation Coordinator, they are the Government or Military personnel that: -represent AITM at waterfront and oversee AIT -monitor AIT-conduct in brief and out brief -check into RMMCO -maintain AIT WB on Ship/work site -create CARs, LARs, TRs -ensure QA(AMQAP, QMS, QAWB) What is a day at a waterfront for an OSIC? - Answers - RMMCO online check in 30 days prior - Submit Visit request